Convoluted Tubing 712-419 Composite Conduit-to-Connector Adapter Straight, 45° and 90° For Glenair Series 74 Helical Convoluted Tubing Angle and Profile S - Straight T - 45° Elbow W - 90° Elbow Product Series A 712 - Conduit Adapter 712 F T Connector Designator A, F, H and U B C Finish Symbol (See Table III) 419 XM Basic Part Number Tubing Size (See Table II) 19 12 To Accomodate EMI or Dacron Over Braid (Omit if not required) K - 1- A Tubing Option K - PEEK (Omit for PFA, ETFE, FEP or PTFE; see note 2) Connector Shell Size (See Table I) CONNECTOR DESIGNATOR: A - MIL-DTL-5015 / -26482 / -83723 F - MIL-DTL-38999 Series I, II H - MIL-DTL-38999 Series III and IV U - DG123 and DG123A A Thread Typ. ROTATABLE COUPLING AntiDecoupling Device LOW PROFILE D See optional configuration and Detail A 1.250 (31.8) Tubing shown for reference only (See Note 2) Tubing I.D. J Typ (see Note 3) C SELF-LOCKING Optional Configuration (See Detail A) Sym S – Straight Knurl or Flute Style Manufacturer's Option, Typ. G E F E F G Sym W 90° Dash 1 configuration EMI or Dacron over Braid (See P/N Development) H Sym T 45° Raised configuration (Mfr's option) K Diameter Entry TYP Land area to accommodate DETAIL A Adhesive Optional Adhesive Land Configuration © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-24 Convoluted Tubing 712-419 Composite Conduit-to-Connector Adapter Straight, 45° and 90° For Glenair Series 74 Helical Convoluted Tubing TABLE I: CONNECTOR SHELL SIZE ORDER NUMBER Shell Size A,F & H G&U 08, 09 03, 10, 11 12, 13 14, 15 16, 17 18, 19 20, 21 22, 23 24, 25, 61 28 Tubing Size 06 09 10 12 14 16 20 24 28 32 40 48 – 08 10, 11 12, 13 14, 15 16, 17 18, 19 20 22, 23 24, 25 E +.06 (1.5) .72 .75 .75 .76 .78 .79 .82 .86 .89 .92 F +.09 (2.3) (18.3) (19.1) (19.1) (19.3) (19.8) (20.1) (20.8) (21.8) (22.6) (23.4) TABLE II: TUBING SIZE Conduit J Dia I.D. Max .188 (4.8) .54 (13.7) .281 (7.1) .63 (16.0) .312 (7.9) .69 (17.5) .375 (9.5) .73 (18.5) .437 (11.1) .80 (20.3) .500 (12.7) .87 (22.1) .625 (15.9) 1.00 (25.4) .750 (19.1) 1.18 (30.0) .875 (22.2) 1.32 (33.5) 1.000 (25.4) 1.47 (37.3) 1.250 (31.8) 1.76 (44.7) 1.500 (38.1) 2.13 (54.1) .89 .95 1.02 1.05 1.07 1.08 1.11 1.15 1.18 1.21 (22.6) (24.1) (25.9) (26.7) (27.2) (27.4) (28.2) (29.2) (30.0) (30.7) G +.06 (1.5) .69 .75 .81 .88 .94 .97 1.06 1.13 1.19 1.34 (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) (34.0) H +.09 (2.3) 1.11 1.16 1.22 1.29 1.35 1.38 1.47 1.54 1.73 1.82 (28.2) (29.5) (31.0) (32.8) (34.3) (35.1) (37.3) (39.1) (43.9) (46.2) Tubing Size Max. 09 12 16 20 24 28 32 32 40 40 B C TABLE III K Dia. Entry ± .03 (.76) .12 (3.0) .22 (5.6) .24 (6.1) .29 (7.4) .34 (8.6) .40 (10.2) .52 (13.2) .65 (16.5) .78 (19.8) .90 (22.9) 1.08 (27.4) 1.32 (33.5) A Symbol Finish Description XB No Plating - Black Color (Non-Conductive Finish) XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM XO No Plating - Brown Color (Non-Conductive Finish) XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel D E APPLICATION NOTES 1. Metric dimensions (mm) are in parentheses and are for reference only. 2. Convoluted tubing size, tubing to be ordered separately (see Series 74 Catalog, Type A Tubing Section, Standard Pitch). Dash 1 configuration accommodates Type B or D Tubing. For PTFE maximum lengths - consult factory. 3. Different adapters are necessary to terminate PEEK tubing. Nominal I.D. reduced by approximately .060 (use Suffix P) in P/N development. For permanent termination use 3M Scotch Weld after installing tubing/shielding, see Detail A. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] C-25 F G