MA-COM EKIN2

Series I/Q Demodulator — 380 - 400 MHz
EKIN2-390DX1
EKIN2-390DX1
E-Series I/Q Demodulator
380 - 400 MHz
Features
•
•
•
SM-92 Package
Excellent Phase and Amplitude Balance
LO Power +10 dBm Typical
Surface Mount
Note: Non Hermetic Package
Description
M/A-COM’s EKIN2-390DX1 is a passive, surface mount I/Q
Demodulator. Ideally suited for Direct Demodulation in PMR/
TETRA applications.
Electrical Specifications @25°C
Parameter
Frequency Range
LO / RF 380 - 400
I/Q
DC - 1
Amplitude Unbalance
Phase Unbalance
Isolation
Units
Typical
Minimum
Maximum
MHz
MHz
—
—
—
—
—
—
dB
0.5
—
1.0
Degrees
2.0
—
3.0
dB
dB
55
42
40
40
—
—
dB
6.4
—
8.0
dBm
+10 ± 1
—
±1
LO to RF
LO to I/Q
Conversion Loss
(LO) Carrier Power
V2.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
S 1376 C
Series I/Q Demodulator — 380 - 400 MHz
EKIN2-390DX1
Functional Configuration
Absolute Maximum Ratings
Parameter
Absolute Maximum
Function
Pin No.
Operating Temperature
-10°C to +70°C
LO
1
Storage Temperature
-55°C to +100°C
RF
8
Impedance
50 Ohms Nominal
I
5
RF Power (1dB Compression)
4 dBm Max
Q
6
External 50 Ohms
—
Case Ground
3,4,7
Not Connected
2
Typical Performance @ +25°C
Phase Unbalance
Amplitude Unbalance
0.40
2.5
2.4
0.38
2.3
2.2
dB
Degrees
0.36
0.34
2.1
2.0
1.9
1.8
0.32
1.7
1.6
0.30
1.5
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
Frequency (MHz)
0.3
0.4
0.5
0.6
0.7
0.8
0.9
V2.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
1.0
Frequency (MHz)
S 1376 C