*R oH V SC AV ER OM AI SIO PL LA N IA BL S NT E Features ■ Conductive plastic ■ RoHS compliant* version available ■ Linear tapers ■ Audio tapers available ■ PC board and bushing mount 3360 Y 503 ■ Plastic bushing and plastic shaft ■ Withstands typical industrial washing C0 247 processes 3360 - 6 mm Square Sealed Panel Control Electrical Characteristics Standard Resistance Range Linear ..............1K ohms to 1 megohm Total Resistance Tolerance Linear Tapers ............................±20 % Independent Linearity .....................±5 % Absolute Minimum Resistance ............................2 % or 2 ohms max. ......................... (whichever is greater) Effective Electrical Angle ..240 ° nominal Contact Resistance Variation ............................1 % or 3 ohms max. (whichever is greater) Dielectric Withstanding Voltage (MIL-STD-202 – Method 301) Sea Level .............. 900 VAC minimum 70,000 Feet ........... 350 VAC minimum Insulation Resistance .................. 1,000 megohms minimum Power Rating @ 70 °C (Derate to 0 at 125 °C Voltage Limited By Power Dissipation or 200 VAC, Whichever is Less) ............................................. .25 watts Audio Tapers .................... 0.125 watts Theoretical Resolution ............................... Essentially infinite Environmental Characteristics Operating Temperature Range .................................+1 °C to +125 °C Storage Temperature Range ................................-55 °C to +125 °C Temperature Coefficient Over Storage Temperature Range ................................... ±1,000 ppm/°C Vibration ......................................... 30 G Total Resistance Shift.... ±2 % maximum Voltage Ratio Shift..... ±2 % maximum Shock............................................ 100 G Total Resistance Shift ... ±2 % maximum Voltage Ratio Shift...... ±2 % maximum Load Life ............................. 1,000 Hours Total Resistance Shift ......................... ±10 % TRS maximum Rotational Life (No Load) .. 50,000 Cycles Total Resistance Shift ........................... ±5 % TRS maximum Contact Resistance Variation ....................................3 % or 3 ohms, whichever is greater Moisture Resistance ........ MIL-STD-202, Method 103, Condition B Total Resistance Shift ......................... ±10 % TRS maximum IP Rating .........................................IP 67 Physical Characteristics Stop Strength......... 5.65 N-cm (8 oz.-in.) Mechanical Angle .............310 ° nominal Torque Starting ........3.53 N-cm (5.0 oz.-in.) maximum Running ........3.53 N-cm (5.0 oz.-in.) maximum Mounting (Torque on Bushing) ............17 N-cm (1.5 lb.-in.) maximum [plastic bushing] Weight ...................................4.5 grams Terminals ....................... Solderable pins Soldering Condition ..........5 seconds at 360 °C maximum. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 wire diameter. Marking .........Manufacturer’s trademark, model number, product code, terminal style, resistance code and date code Flammability ........ Conforms to UL94V-0 Epoxy................... Conforms to UL94V-1 Hardware (purchased separately) Nut............................................ H-38-1 Washer ..................................... H-37-5 Standard Resistance Table Resistance (Ohms) 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 Resistance Code 102 202 502 103 203 503 104 204 504 105 Popular distribution resistance values listed in boldface. Special resistances available. How To Order 3360 Y - 1 - 103 LF Model Terminal Style Designator Single Cup: C = In-line Straight Terminals Side Exit P = 5.08 mm x 2.54 mm Triangular Pattern Rear Exit Y = 5.08 mm x 5.08 mm Triangular Pattern Rear Exit Bushing Designator 1 = Standard Resistance Code Terminations LF = 100 % Tin-plated (RoHS compliant) Blank = 90 % Tin / 10 % Lead-plated (Standard) *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 3360 - 6 mm Square Sealed Panel Control Product Dimensions COMMON DIMENSIONS 3360C 3.35 (.131) 6.35 ± .025 (.250 ± .010) MOUNTING DIA. 1/4-32 UNEF-2A THREADED PLASTIC BUSHING .33 (.013) MIN. STANDOFF 2.36 ± .050 DIA. (.093 ± .002) 5.59 ± .25 (.220 ± .010) ACROSS FLATS 6.71 ± .25 (.264 ± .010) 6.78 ± .25 (.266 ± .010) 3.20 ± .25 (.126 ± .010) .38 (.015) MIN. STANDOFF 2.54 ± .25 (.100 ± .010) 5.44 (.214) MIN. FULL THREAD 6.35 (.250) 2.54 ± .25 (.100 ± .010) 5.97 ± .89 (.235 ± .035) 3.91 ± .38 (.154 ± .015) 4.70 ± .38 (.185 ± .015) 12.70 ± .64 (.500 ± .025) ADJUSTMENT SLOT .64 ± .10 .76 ± .25 WIDE X DEEP (.025 ± .004) (.030 ± .010) 3 2 1 .46 ± .05 DIA. (.018 ± .002) SOLDER PLATED COPPER PINS 3360P .33 (.013) MIN. STANDOFF 5.97 ± .89 (.235 ± .035) 2.54 ± .38 (.100 ± .015) 2 1 3 3.58 ± .38 (.141 ± .015) TYP. 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) 3360Y 5.97 ± .89 (.235 ± .035) 5.08 ± .25 (.200 ± .010) 2 1 3 .97 ± .38 (.038 ± .015) 2.54 ± .25 (.100 ± .010) 2 DIMENSIONS: MM (INCHES) CCW 2.54 ± .25 (.100 ± .010) WIPER 3 1 CW CLOCKWISE REV. 02/13 *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.