PL IA N T Features CO M ■ Carbon element *R oH S ■ Metal housing ■ 45-100 mm travel ■ Single and dual gang ■ Dust cover option ■ RoHS compliant* PTB Series - Low Profile Slide Potentiometer Electrical Characteristics Taper .................................... Linear, audio Standard Resistance Range ......................5K ohms to 200K ohms Standard Resistance Tolerance.....±20 % Residual Resistance ....................... 500 ohms or 1 % max. Insulation Resistance ........ Min. 100 megohms at 250 V DC Product Dimensions PTB45 and PTB60 88.0 (3.46) 80.0 (3.14) 2 - M3 x 0.5 1 3 16.0 (.629) Environmental Characteristics Operating Temperature ...................................-10 °C to +60 °C Power Rating, Linear 45 mm ....0.125 W (0.06 W Dual Gang) 60 mm ...................... 0.25 W (0.125 W) 100 mm .......................... 0.5 W (0.5 W) Power Rating, Audio 45 mm ..0.025 W (0.015 W Dual Gang) 60 mm ...................... 0.25 W (0.125 W) 100 mm ...................... 0.25 W (0.25 W) Maximum Operating Voltage - Linear 45 mm ................................... 350 VDC 60-100 mm ............................ 500 VDC Maximum Operating Voltage - Audio 45 mm ................................... 250 VDC 60-100 mm Travel ................. 350 VDC Withstand Voltage, Audio ............................... 1 Min. at 500 V AC Tracking Error ......... 3 dB at 50 % of travel Mechanical Characteristics Operating Force ............. 10 to 100 g-cm Stop Strength ..................... 5 kg-cm min. Sliding Life ......................... 15,000 cycles Soldering Condition ............ 300°C max. within 3 seconds Travel ............................... 45, 60, 100mm Rating Power Ratio (%) Derating Curve 45.0 or 60.0 TRAVEL (1.77 or 2.36) L 8.0 (.314) 4.0 (.157) 87.5 (3.44) 87.5 (3.44) 51.7 (2.03) 2 3 1 11.25 (.442) 1 2 3.75 (.147) 3.1 +0.2 / -0.0 DIA. HOLES (.122 +0.007 / -0.0) 6 PLCS. Numbers 1 , 2 and 3 for Dual Gang Versions AP Metal Lever Lever Style BP Metal Lever 4.0 (.157) 8.0 (.314) 100 3 2.0 +0.2 / -0.0 DIA. HOLES (.078 +0.007 / -0.0) 2 PLCS. 1.0 (.039) 2-(RO .75) 80 60 40 33 20 0 (RO .5) 10.0 (.393) 10.0 (.393) 0 10 20 30 40 50 60 70 80 90 100 2-CO .5 Ambient Temperature (°C) 8.0 (.314) Thickness = 1.2 mm Thickness = 1.2 mm DIMENSIONS: MM (INCHES) *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Applications ■ Audio/TV sets ■ Car radio ■ Amplifiers/mixers/drum machines/synthesizers ■ PCs/monitors ■ Appliances PTB Series - Low Profile Slide Potentiometer Product Dimensions How To Order PTB 01 4 3 - 2 0 10 BP A 102 PTB01 128.0 (5.03) 120.0 (4.72) 2 - M3 x 0.5 1 3 16.0 (.629) 100.0 TRAVEL (3.93) L 8.0 (.314) 4.0 (.157) 127.5 (5.01) Model Stroke Length • 45 = 45 mm • 60 = 60 mm • 01 = 100 mm Dust Cover Option • 4 = No Dust Cover • 5 = Rubber Dust Cover No. of Gangs • 3 = Single Gang • 4 = Dual Gang Pin Style • 2 = PC Pins Down Facing No Detent Standard Lever Length • 10 = 10 mm Lever Style • BP = Metal Lever (Refer to Drawing) • AP = Metal Lever (Refer to Drawing) Resistance Taper • A = Audio Taper • B = Linear Taper Resistance Code (See Table) Other styles available. Standard Resistance Table 127.5 (5.01) 82.5 (3.24) 2 11.25 (.442) 3 1 1 2 +0.2 2.0 -0.0 DIA. HOLES (.078 +0.007 2 PLCS. -0.0 ) 3 3.75 (.147) Resistance (Ohms) 5,000 10,000 20,000 50,000 100,000 200,000 +0.2 -0.0 3.1 DIA. HOLES (.122 +0.007 6 PLCS. -0.0 ) Numbers 1 , 2 and 3 for Dual Gang Versions DIMENSIONS: MM (INCHES) REV. 01/14 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Resistance Code 502 103 203 503 104 204