Adapters and Transitions Series 72, 74, & 75 Multi-Port, Special Purpose Transitions 710 - 652 NF 40 A4 B4 C4 D4 E4 F4 Product Series "F" PortConduit Dash No. (Table II, Omit if Not Used) Basic Number "E" Port Conduit Dash No. (Table II, Omit if Not Used) Finish Symbol (Table III) Dash No. (Table I, Note 2) "D" Port Conduit Dash No. (Table II, Omit if Not Used) "A" Port Conduit Dash No. (Table II) "C" Port Conduit Dash No. (Table II, Omit if Not Used) "B" Port Conduit Dash No. (Table II) .43 (10.9) Ref. Port "A" .20 (5.1) Ref. Port "B" C Thread B F D E Port "D" A Thread Knurl Style Mfr Option 1.24 (31.5) Ref. 4 PORT Port "A" Port "A" Port "A" Port "C" Port "B" 2 PORT © 7/1999 Glenair, Inc. Port "C" .610 (15.5) Max Port "E" Port "F" Port "A" Port "B" Port "B" 3 PORT Port "B" Port Port "C" "D" 5 PORT CAGE Codes 06324 Port "E" Port "D" Port "C" 6 PORT Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 108 Adapters and Transitions Series 72, 74, & 75 Multi-Port, Special Purpose Transitions Dash No. 20 21 22 23 24 26 28 30 31 32 33 34 35 36 37 38 40 42 60 A Thread Class 2A 1 1/4 - 18 UNEF 1 5/16 - 18 UNEF 1 3/8 - 18 UNEF 1 7/16 - 18 UNEF 1 1/2 - 18 UNEF 1 5/8 - 18 UNEF 1 3/4 - 18 UNS 1 7/8 - 18 UNS 1 15/16 - 16 UN 2 - 18 UN 2 1/16 - 16 UNS 2 1/8 - 16 UN 2 3/16 - 16 UNS 2 1/4 - 16 UN 2 5/16 - 16 UNS 2 3/8 - 16 UN 2 1/2 - 16 UN 2 5/8 - 16 UN 3 3/4 - 16 UN TABLE I B Max 1.41 (35.8) 1.47 (37.3) 1.53 (38.9) 1.59 (40.4) 1.66 (42.2) 1.78 (45.2) 1.91 (48.5) 2.03 (51.6) 2.09 (53.1) 2.16 (54.9) 2.22 (56.4) 2.28 (57.9) 2.34 (59.4) 2.41 (61.2) 2.47 (62.7) 2.53 (64.3) 2.66 (67.6) 2.78 (70.6) 2.91 (73.9) E ±.005 (.1) .980 (24.9) 1.040 (26.4) 1.100 (27.9) 1.160 (29.5) 1.220 (31.0) 1.350 (34.3) 1.480 (37.6) 1.590 (40.4) 1.660 (42.2) 1.730 (43.9) 1.780 (45.2) 1.840 (46.7) 1.900 (48.3) 1.970 (50.0) 2.030 (51.6) 2.090 (53.1) 2.220 (56.4) 2.340 (59.4) 2.468 (62.7) ±.005 1.095 1.157 1.220 1.280 1.345 1.470 1.595 1.720 1.770 1.845 1.900 1.960 2.020 2.085 2.145 2.210 2.335 2.460 3.590 F (.1) (27.8) (29.4) (31.0) (32.5) (34.2) (37.3) (40.5) (43.7) (45.0) (46.9) (48.3) (49.8) (51.3) (53.0) (54.5) (56.1) (59.3) (62.5) (91.2) TABLE III TABLE II Port Conduit A Thread Conduit Code Class 2A Dash No. Ref. 1 7/16 - 28 UNEF 06 2 1/2 20 UNEF 08 3 9/16 24 UNEF 09 4 9/16 24 UNEF 10 5 5/8 24 UNEF 12 6 11/16 24 UNEF 14 7 3/4 20 UNEF 16 8 7/8 - 20 UNEF 20 9 1 - 20 UNEF 24 10 1 3/16 - 18 UNEF 28 11 1 5/16 - 18 UNEF 32 D ±.005 (.1) .187 (4.7) .250 (6.4) .281 (7.1) .312 (7.9) .375 (9.5) .437 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) SYMBOL FINISH B Olive Drab over Cadmium Plate J Gold Iridite over Cadmium Plate over Nickel M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel NC Zinc-Cobalt, Olive Drab NF Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) T Bright Dip Cadmium Plate over Nickel Z1 Passivate Notes: 1. Metric dimensions (mm) are in parentheses. 2. Plate diameter "B" is based on outlet combinations, consult factory for appropriate size. © 7/1999 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 109