Adapters and Transitions 710-100 Metal Bulkhead Adapters & Feed-Throughs for Series 72 & 74 Tubing and Series 75 Conduit 710 - 100 M 20 D Product Series Flat for D-Hole Mounting (Omit for None) Adapter Material 100 = Aluminum 101 = Brass 372 = Stainless Steel Dash No. (Table I) Finish (Table II) Feed-Thru Material 102 = Aluminum 103 = Brass 373 = Stainless Steel .125 (3.2) MAX PANEL THICKNESS .125 (3.2) MAX PANEL THICKNESS O-RING .188 (4.8) B O-RING C MTG HOLE B A THREAD F .188 (4.8) E A THREAD H JAM NUT FLATS D FLATS ON FITTING Bulkhead Adapters 710-100/101/372 1.25 (31.8) MAX C DIA MTG HOLE A THREAD G Bulkhead Feed-Throughs 710-102/103/373 Metric dimensions (mm) are in parentheses. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-2 Adapters and Transitions 710-100 Metal Bulkhead Adapters & Feed-Throughs for Series 72 & 74 Tubing and Series 75 Conduit TABLE I DASH NO. 06 08 09 10 12 14 16 20 24 28 32 40 48 56 64 80 96 AVAILABILITY 72 74 75 06 08 09 12 16 20 24 28 32 40 09 10 12 14 16 20 24 28 32 40 48 56 64 12 16 20 24 32 40 48 56 64 80 96 A THREAD CLASS 2A 7/16 - 28 UNEF 1/2 - 20 UNF 9/16 - 24 UNEF 9/16 - 24 UNEF 5/8 - 24 UNEF 11/16 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 3/16 - 18 UNEF 1 5/16 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNS 2 - 18 UNS 2 1/4 - 16 UN 2 3/4 - 16 UN 3 1/4 - 16 UN C DIA +.03 (.8) -.00 (.0) .44 (11.2) .50 (12.7) .56 (14.2) .56 (14.2) .63 (16.0) .69 (17.5) .75 (19.1) .88 (22.4) 1.00 (25.4) 1.19 (30.2) 1.31 (33.3) 1.50 (38.1) 1.75 (44.5) 2.00 (50.8) 2.25 (57.2) 2.75 (69.9) 3.25 (82.6) B DIA +.015 (.4) .193 (4.9) .255 (6.5) .286 (7.3) .317 (8.1) .380 (9.7) .442 (11.2) .505 (12.8) .630 (16.0) .755 (19.2) .880 (22.4) 1.005 (25.5) 1.255 (31.9) 1.505 (38.2) 1.755 (44.6) 2.005 (50.9) 2.505 (63.6) 3.005 (76.3) D FITTING .69 (17.5) .75 (19.1) .81 (20.6) .81 (20.6) .88 (22.4) .94 (23.9) 1.00 (25.4) 1.13 (28.7) 1.25 (31.8) 1.44 (36.6) 1.56 (39.6) 1.81 (46.0) 2.06 (52.3) 2.31 (58.7) 2.56 (65.0) 3.06 (77.7) 3.56 (90.4) E +.0 (.0) -.015 (.4) .375 (9.5) .438 (11.1) .500 (12.7) .500 (12.7) .563 (14.3) .625 (15.9) .688 (17.5) .812 (20.6) .938 (23.8) 1.125 (28.6) 1.250 (31.8) 1.438 (36.5) 1.688 (42.9) 1.938 (49.2) 2.188 (55.6) 2.688 (68.3) 3.188 (81.0) F MAX 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.00 (25.4) 1.13 (28.7) 1.13 (28.7) 1.13 (28.7) 1.13 (28.7) 1.13 (28.7) G MAX 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.63 (41.4) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) 1.75 (44.5) H JAM NUT .63 (16.0) .75 (19.1) .75 (19.1) .75 (19.1) .81 (20.6) .88 (22.4) .94 (23.9) 1.06 (26.9) 1.25 (31.8) 1.38 (35.1) 1.62 (41.1) 1.75 (44.5) 2.00 (50.8) 2.19 (55.6) 2.44 (62.0) 3.00 (76.2) 3.50 (88.9) TABLE II SYMBOL FINISH B Olive Drab over Cadmium Plate J Gold Iridite over Cadmium Plate over Nickel M Electroless Nickel N Olive Drab over Cadmium Plate over Nickel NC Zinc-Cobalt, Olive Drab NF Olive Drab over Cadmium Plate over Electroless Nickel (500 Hour Salt Spray) T Bright Dip Cadmium Plate over Nickel Z1 Passivate Metric dimensions (mm) are in parentheses. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-3