RN2414~RN2418 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) RN2414,RN2415,RN2416,RN2417,RN2418 Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications Unit: mm l With built-in bias resistors l Simplify circuit design l Reduce a quantity of parts and manufacturing process l Complementary to RN1414~RN1418 Equivalent Circuit and Bias Resistor Values Type No. R1 (kΩ) R2 (kΩ) RN2414 1 10 RN2415 2.2 10 RN2416 4.7 10 RN2417 10 4.7 RN2418 47 10 JEDEC EIAJ TOSHIBA Weight: 0.012g Maximum Ratings (Ta = 25°°C) Characteristic Collector-base voltage Collector-emitter voltage Emitter-base voltage RN2414~2418 Junction temperature Storage temperature range Rating Unit VCBO −50 V VCEO −50 V RN2414 −5 RN2415 −6 RN2416 −7 VEBO RN2417 −15 RN2418 −25 Collector current Collector power dissipation Symbol RN2414~2418 V IC −100 mA PC 200 mW Tj 150 °C Tstg −55~150 °C 1 TO-236MOD SC-59 2-3F1A 2001-06-07 RN2414~RN2418 Electrical Characteristics (Ta = 25°°C) Symbol Test Circuit RN2414~2418 ICBO ― RN2414~2418 ICEO Characteristic Collector cut-off current Min Typ. Max Unit VCB = −50V, IE = 0 ― ― −100 nA ― VCE = −50V, IB = 0 ― ― −500 nA ― VEB = −5V, IC = 0 −0.35 ― −0.65 ― VEB = −6V, IC = 0 −0.37 ― −0.71 ― VEB = −7V, IC = 0 −0.36 ― −0.68 RN2417 ― VEB = −15V, IC = 0 −0.78 ― −1.46 RN2418 ― VEB = −25V, IC = 0 −0.33 ― −0.63 ― VCE = −5V, IC = −10mA 50 ― ― 30 ― ― ― −0.1 −0.3 −0.5 ― −2.0 −0.6 ― −2.5 −0.7 ― −2.5 RN2414 RN2415 Emitter cut-off current DC current gain Collector-emitter saturation voltage Input voltage (ON) Input voltage (OFF) RN2416 RN2414~16, 18 RN2417 RN2414~2418 IEBO hFE VCE (sat) ― ― RN2415 ― RN2416 VI (ON) IC = −5mA, IB = −0.25mA ― RN2414 Test Condition VCE = −0.2V, IC = −5mA ― RN2417 ― −1.5 ― −3.5 RN2418 ― −2.5 ― −10.0 RN2414 ― −0.3 ― −0.9 RN2415 ― −0.3 ― −1.0 −0.3 ― −1.1 RN2416 VI (OFF) VCE = −5V, IC = −0.1mA ― RN2417 ― −0.3 ― −3.0 RN2418 ― −0.5 ― −5.7 Translation frequency RN2414~2418 fT ― VCE =−10V, IC = −5mA ― 200 Collector output capacitance RN2414~2418 Cob ― VCB = −10V, IE = 0, f = 1MHz ― 3.0 6.0 Input resistor Resistor ratio ― RN2414 ― 0.7 1.0 1.3 RN2415 ― 1.54 2.2 2.86 3.29 4.7 6.11 RN2416 R1 ― ― RN2417 ― 7.0 10.0 13.0 RN2418 ― 32.9 47.0 61.1 RN2414 ― ― 0.1 ― RN2415 ― ― 0.22 ― ― 0.47 ― RN2416 R1/R2 ― ― RN2417 ― ― 2.13 ― RN2418 ― ― 4.7 ― 2 mA ― V V V MHz pF kΩ ― 2001-06-07 RN2414~RN2418 3 2001-06-07 RN2414~RN2418 4 2001-06-07 RN2414~RN2418 5 2001-06-07 RN2414~RN2418 6 2001-06-07 RN2414~RN2418 Type Name Marking RN2414 RN2415 RN2416 RN2417 RN2418 7 2001-06-07 RN2414~RN2418 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 8 2001-06-07