TC7MPN3245FTG TOSHIBA Digital Integrated Circuit Silicon Monolithic TC7MPN3245FTG Low Voltage/Low Power 4-Bit × 2 Dual Supply Bus Transceiver The TC7MPN3245FTG is an advanced high-speed CMOS 8-bit dual supply voltage interface bus transceiver, fabricated with silicon gate CMOS technology. It is also designed with over-voltage tolerant inputs and outputs up to 3.6 V. Designed for use as an interface between a 1.2-V, 1.5-V, 1.8-V, or 2.5-V bus and a 1.8-V, 2.5-V or 3.6-V bus in mixed 1.2-V, 1.5-V, 1.8-V or 2.5-V/1.8-V, 2.5-V or 3.6-V supply systems. The A-port interfaces with the 1.2-V, 1.5-V, 1.8-V or 2.5-V bus, the B-port with the 1.8-V, 2.5-V, 3.3-V bus. Weight: 0.03 g (typ.) The direction of data transmission is determined by the level of the DIR input. The enable input ( OE ) can be used to disable the device so that the buses are effectively isolated. All inputs are equipped with protection circuits against static discharge or transient excess voltage. Features • Bidirectional interface between 1.2-V and 1.8-V, 1.2-V and 2.5-V, 1.2-V and 3.3-V, 1.5-V and 2.5-V, 1.5-V and 3.3-V, 1.8-V and 2.5-V, 1.8-V and 3.3-V or 2.5-V and 3.3-V buses. • High-speed operation : tpd = 13.7 ns (max) (VCCA = 2.5 ± 0.2 V, VCCB = 3.3 ± 0.3 V) tpd = 14.8 ns (max) (VCCA = 1.8 ± 0.15 V, VCCB = 3.3 ± 0.3 V) tpd = 16.0 ns (max) (VCCA = 1.5 ± 0.1 V, VCCB = 3.3 ± 0.3 V) tpd = 61 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 3.3 ± 0.3 V) tpd = 18.5 ns (max) (VCCA = 1.8 ± 0.15 V, VCCB = 2.5 ± 0.2 V) tpd = 19.7 ns (max) (VCCA = 1.5 ± 0.1 V, VCCB = 2.5 ± 0.2 V) tpd = 60 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 2.5 ± 0.2 V) tpd = 58 ns (max) (VCCA = 1.2 ± 0.1 V, VCCB = 1.5 ± 0.1 V) Output current : IOHB/IOLB = ±3 mA (min) (VCCB = 3.0 V) IOHB/IOLB = ±2 mA (min) (VCCB = 2.3 V) IOHB/IOLB = ±0.5 mA (min) (VCCB = 1.65 V) IOHA/IOLA = ±9 mA (min) (VCCA = 2.3 V) IOHA/IOLA = ±3 mA (min) (VCCA = 1.65 V) IOHA/IOLA = ±1 mA (min) (VCCA = 1.4 V) • • Latch-up performance: ±300 mA • ESD performance: Machine model ≥ ±200 V Human body model ≥ ±2000 V • Ultra-small package: VQON24 • Low current consumption : Using the new circuit significantly reduces current consumption when OE = “H”. Suitable for battery-driven applications such as PDAs and cellular phones. • Floating A-bus and B-bus are permitted. (when OE = “H”) 3.6-V tolerant function and power-down protection provided on all inputs and outputs. Note 1: Do not apply a signal to any bus pin when it is in the output mode. Damage may result. Note 2: RA or RMA flux is recommended when mounting the VQON package. 1 2007-10-19 TC7MPN3245FTG Pin Assignment (top view) IEC Logic Symbol 2DIR 1DIR VCCA GND 1OE 2OE 24 23 22 21 20 1OE 19 1DIR 1A1 1 18 1B1 1A2 2 17 1B2 1A3 3 16 1B3 1A4 4 15 1B4 2A1 5 14 2B1 2A2 6 13 2B2 7 8 9 10 11 2OE 2DIR 1A1 20 23 19 24 1 1A2-4 2A1 2-4 5 2A2-4 6-8 G3 3 EN1 (BA) 3 EN2 (AB) G6 6 EN4 (BA) 6 EN5 (AB) 18 1 2 4 5 1B1 15-17 1B2-4 14 2B1 11-13 2B2-4 12 2A3 2A4 GND VCCB 2B4 2B3 Truth Table Inputs Function Bus 1B1-1B4 Outputs 1OE 1DIR Bus 1A1-1A4 L L Output Input A=B L H Input Output B=A H X Z Inputs Z Function 2OE 2DIR Bus 2A1-2A4 Bus 2B1-2B4 Outputs L L Output Input A=B L H Input Output B=A H X Z Z X: Don’t care Z: High impedance Marking P00E ***** Product name Lot trace code 1 pin 2 2007-10-19 TC7MPN3245FTG Block Diagram VCCA 1DIR VCCB Logic level converter 1OE 1A1-4 1B1-4 VCCA 2DIR 2OE VCCB Logic level converter 2A1-4 2B1-4 3 2007-10-19 TC7MPN3245FTG Absolute Maximum Rating (Note 1) Characteristics Power supply voltage (Note 2) DC input voltage (DIR, OE ) Symbol Rating VCCA −0.5 to 4.6 VCCB −0.5 to 4.6 VIN −0.5 to 4.6 VI/OA DC bus I/O voltage VI/OB −0.5 to 4.6 Unit V V (Note 3) −0.5 to VCCA + 0.5 (Note 4) −0.5 to 4.6 (Note 3) V −0.5 to VCCB + 0.5 (Note 4) IIK −50 II/OK ±50 IOUTA ±25 IOUTB ±6 ICCA ±50 ICCB ±50 Power dissipation PD 180 mW Storage temperature Tstg −65 to 150 °C Input diode current Output diode current DC output current DC VCC/ground current per supply pin mA (Note 5) mA mA mA Note 1: Exceeding any of the absolute maximum ratings, even briefly, may lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: Do not supply a voltage to VCCB pin when VCCA is in the OFF state. Note 3: Output in OFF state Note 4: High or Low state. IOUT absolute maximum rating must be observed. Note 5: VOUT < GND, VOUT > VCC 4 2007-10-19 TC7MPN3245FTG Operating Ranges (Note1) Characteristics Power supply voltage (Note 2) Input voltage (DIR, OE ) Symbol Rating VCCA 1.1 to 2.7 VCCB 1.65 to 3.6 VIN 0 to 3.6 0 to 3.6 VI/OA Unit V V (Note 3) 0 to VCCA (Note 4) Bus I/O voltage 0 to 3.6 VI/OB (Note 3) V 0 to VCCB (Note 4) IOUTA Output current IOUTB ±9 (Note 5) ±3 (Note 6) ±1 (Note 7) ±3 (Note 8) ±2 (Note 9) ±0.5 (Note 10) Operating temperature Topr −40 to 85 Input rise and fall time dt/dv 0 to 10 mA °C (Note 11) ns/V Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs and bus inputs must be tied to either VCC or GND. Please connect both bus inputs and the bus outputs with VCC or GND when the I/O of the bus terminal changes by the function. In this case, please note that the output is not short-circuited. Note 2: Do not use when VCCA > VCCB Note 3: Output in OFF state Note 4: High or low state Note 5: VCCB= 2.3 to 2.7 V Note 6: VCCB = 1.65 to 1.95 V Note 7: VCCB = 1.4 to 1.6 V Note 8: VCCA = 3.0 to 3.6 V Note 9: VCCA = 2.3 to 2.7 V Note 10: VCCA = 1.65 to 1.95 V Note 11: VIN = 0.8 to 2.0 V, VCCA = 2.5 V, VCCB = 3.0 V 5 2007-10-19 TC7MPN3245FTG Electrical Characteristics DC Characteristics (2.3 V ≤ VCCA ≤ 2.7 V, 2.7 V < VCCB ≤ 3.6 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Min Max 2.3 to 2.7 2.7 to 3.6 1.6 ⎯ VIHB Bn 2.3 to 2.7 2.7 to 3.6 2.0 ⎯ VILA DIR, OE , An 2.3 to 2.7 2.7 to 3.6 ⎯ 0.7 VILB Bn 2.3 to 2.7 2.7 to 3.6 ⎯ 0.8 2.3 to 2.7 2.7 to 3.6 VCCA − 0.2 ⎯ 2.3 2.7 to 3.6 1.7 ⎯ IOHB = −100 μA 2.3 to 2.7 2.7 to 3.6 VCCB − 0.2 ⎯ IOHB = −3 mA 2.3 to 2.7 3.0 2.2 ⎯ IOLA = 100 μA 2.3 to 2.7 2.7 to 3.6 ⎯ 0.2 2.3 2.7 to 3.6 ⎯ 0.6 IOLB = 100 μA 2.3 to 2.7 2.7 to 3.6 ⎯ 0.2 IOLB = 3 mA 2.3 to 2.7 3.0 ⎯ 0.55 2.3 to 2.7 2.7 to 3.6 ⎯ ±5.0 IOHA = −100 μA VIN = VIH or VIL VOHB VOLA VIN = VIH or VIL L-level output voltage VOLB IOZA 3-state output OFF state current IOZB IIN IOHA = −9 mA IOLA = 9 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V IOFF1 IOFF2 VIN, VOUT = 0 to 3.6 V IOFF3 ICCA Quiescent supply current Ta = −40 to 85°C DIR, OE , An H-level output voltage Power-off leakage current VCCB (V) VIHA VOHA Input leakage current VCCA (V) ICCB VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND V V V V μA 2.3 to 2.7 2.7 to 3.6 ⎯ ±5.0 2.3 to 2.7 2.7 to 3.6 ⎯ ±5.0 0 0 ⎯ 5.0 2.3 to 2.7 0 ⎯ 5.0 2.3 to 2.7 Open ⎯ 5.0 2.3 to 2.7 2.7 to 3.6 ⎯ 5.0 μA μA μA 2.3 to 2.7 2.7 to 3.6 ⎯ 5.0 ICCA VCCA ≤ (VIN, VOUT) ≤ 3.6 V 2.3 to 2.7 2.7 to 3.6 ⎯ ±5.0 ICCB VCCB ≤ (VIN, VOUT) ≤ 3.6 V 2.3 to 2.7 2.7 to 3.6 ⎯ ±5.0 ICCTB VINA = VCCB − 0.6 V per input 2.3 to 2.7 2.7 to 3.6 ⎯ 750.0 6 Unit μA μA 2007-10-19 TC7MPN3245FTG DC Characteristics (1.65 V ≤ VCCA < 2.3 V, 2.7 V < VCCB ≤ 3.6 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Min Max 1.65 to 2.3 2.7 to 3.6 0.65 × VCCA ⎯ VIHB Bn 1.65 to 2.3 2.7 to 3.6 2.0 ⎯ VILA DIR, OE , An 1.65 to 2.3 2.7 to 3.6 ⎯ 0.35 × VCCA VILB Bn 1.65 to 2.3 2.7 to 3.6 ⎯ 0.8 IOHA = −100 μA 1.65 to 2.3 2.7 to 3.6 VCCA − 0.2 ⎯ IOHA = −3 mA 2.7 to 3.6 1.25 ⎯ IOHB = −100 μA 1.65 to 2.3 2.7 to 3.6 VCCB − 0.2 ⎯ 2.2 ⎯ ⎯ 0.2 2.7 to 3.6 ⎯ 0.3 IOLB = 100 μA 1.65 to 2.3 2.7 to 3.6 ⎯ 0.2 IOLB = 3 mA 1.65 to 2.3 ⎯ 0.55 ⎯ ±5.0 VIN = VIH or VIL VOHB VOLA VIN = VIH or VIL L-level output voltage VOLB IOZA 3-state output OFF state current IOZB IIN IOFF2 1.65 to 2.3 IOLA = 100 μA 1.65 to 2.3 2.7 to 3.6 IOLA = 3 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V IOFF3 ICCA ICCB 1.65 IOHB = −3 mA IOFF1 Quiescent supply current Ta = −40 to 85°C DIR, OE , An H-level output voltage Power-off leakage current VCCB (V) VIHA VOHA Input leakage current VCCA (V) VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND 1.65 3.0 3.0 1.65 to 2.3 2.7 to 3.6 V V V V μA 1.65 to 2.3 2.7 to 3.6 ⎯ ±5.0 1.65 to 2.3 2.7 to 3.6 ⎯ ±2.0 0 0 ⎯ 5.0 1.65 to 2.3 0 ⎯ 5.0 1.65 to 2.3 Open ⎯ 5.0 ⎯ 5.0 1.65 to 2.3 2.7 to 3.6 μA μA μA 1.65 to 2.3 2.7 to 3.6 ⎯ 5.0 ICCA VCCA ≤ (VIN, VOUT) ≤ 3.6 V 1.65 to 2.3 2.7 to 3.6 ⎯ ±5.0 ICCB VCCB ≤ (VIN, VOUT) ≤ 3.6 V 1.65 to 2.3 2.7 to 3.6 ⎯ ±5.0 ICCTB VINB = VCCB − 0.6 V per input 1.65 to 2.3 2.7 to 3.6 ⎯ 750.0 7 Unit μA μA 2007-10-19 TC7MPN3245FTG DC Characteristics (1.4 V ≤ VCCA < 1.65 V, 2.7 V < VCCB ≤ 3.6 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Min Max 1.4 to 1.65 2.7 to 3.6 0.65 × VCCA ⎯ VIHB Bn 1.4 to 1.65 2.7 to 3.6 2.0 ⎯ VILA DIR, OE , An 1.4 to 1.65 2.7 to 3.6 ⎯ 0.30 × VCCA VILB Bn 1.4 to 1.65 2.7 to 3.6 ⎯ 0.8 IOHA = −100 μA 1.4 to 1.65 2.7 to 3.6 VCCA − 0.2 ⎯ IOHA = −1 mA 2.7 to 3.6 1.05 ⎯ IOHB = −100 μA 1.4 to 1.65 2.7 to 3.6 VCCB − 0.2 ⎯ 2.2 ⎯ ⎯ 0.2 2.7 to 3.6 ⎯ 0.35 IOLB = 100 μA 1.4 to 1.65 2.7 to 3.6 ⎯ 0.2 IOLB = 3 mA 1.4 to 1.65 ⎯ 0.55 ⎯ ±5.0 VIN = VIH or VIL VOHB VOLA VIN = VIH or VIL L-level output voltage VOLB IOZA 3-state output OFF state current IOZB IIN IOFF2 1.4 to 1.65 IOLA = 100 μA 1.4 to 1.65 2.7 to 3.6 IOLA = 1 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V IOFF3 ICCA ICCB 1.4 IOHB = −3 mA IOFF1 Quiescent supply current Ta = −40 to 85°C DIR, OE , An H-level output voltage Power-off leakage current VCCB (V) VIHA VOHA Input leakage current VCCA (V) VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND 1.4 3.0 3.0 1.4 to 1.65 2.7 to 3.6 V V V V μA 1.4 to 1.65 2.7 to 3.6 ⎯ ±5.0 1.4 to 1.65 2.7 to 3.6 ⎯ ±2.0 0 0 ⎯ 5.0 1.4 to 1.65 0 ⎯ 5.0 1.4 to 1.65 Open ⎯ 5.0 ⎯ 5.0 1.4 to 1.65 2.7 to 3.6 μA μA μA 1.4 to 1.65 2.7 to 3.6 ⎯ 5.0 ICCA VCCA ≤ (VIN, VOUT) ≤ 3.6 V 1.4 to 1.65 2.7 to 3.6 ⎯ ±5.0 ICCB VCCB ≤ (VIN, VOUT) ≤ 3.6 V 1.4 to 1.65 2.7 to 3.6 ⎯ ±5.0 ICCTB VINB = VCCB − 0.6 V per input 1.4 to 1.65 2.7 to 3.6 ⎯ 750.0 8 Unit μA μA 2007-10-19 TC7MPN3245FTG DC Characteristics (1.1 V ≤ VCCA < 1.4 V, 2.7 V < VCCB ≤ 3.6 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Max 2.7 to 3.6 0.65 × VCCA ⎯ VIHB Bn 1.1 to 1.4 2.7 to 3.6 2.0 ⎯ VILA DIR, OE , An 1.1 to 1.4 2.7 to 3.6 ⎯ 0.30 × VCCA VILB Bn 1.1 to 1.4 2.7 to 3.6 ⎯ 0.8 IOHA = −100 μA 1.1 to 1.4 2.7 to 3.6 VCCA − 0.2 ⎯ IOHB = −100 μA 1.1 to 1.4 2.7 to 3.6 VCCB − 0.2 ⎯ IOHB = −3 mA 1.1 to 1.4 3.0 2.2 ⎯ IOLA = 100 μA 1.1 to 1.4 2.7 to 3.6 ⎯ 0.2 VIN = VIH or VIL IOLB = 100 μA 1.1 to 1.4 2.7 to 3.6 ⎯ 0.2 1.1 to 1.4 3.0 ⎯ 0.55 1.1 to 1.4 2.7 to 3.6 ⎯ ±5.0 VIN = VIH or VIL VOLA VOLB IOZA 3-state output OFF state current IOZB IIN IOLB = 3 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL IOFF2 2.7 to 3.6 ⎯ ±5.0 VIN (DIR, OE ) = 0 to 3.6 V 1.1 to 1.4 2.7 to 3.6 ⎯ ±2.0 0 0 ⎯ 5.0 VIN, VOUT = 0 to 3.6 V 1.1 to 1.4 0 ⎯ 5.0 1.1 to 1.4 Open ⎯ 5.0 1.1 to 1.4 2.7 to 3.6 ⎯ 5.0 IOFF3 ICCA ICCB VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND V V V V μA μA μA 1.1 to 1.4 2.7 to 3.6 ⎯ 5.0 ICCA VCCA ≤ (VIN, VOUT) ≤ 3.6 V 1.1 to 1.4 2.7 to 3.6 ⎯ ±5.0 ICCB VCCB ≤ (VIN, VOUT) ≤ 3.6 V 1.1 to 1.4 2.7 to 3.6 ⎯ ±5.0 ICCTB VINB = VCCA − 0.6 V per input 1.1 to 1.4 2.7 to 3.6 ⎯ 750.0 9 Unit μA 1.1 to 1.4 VOUT = 0 to 3.6 V IOFF1 Quiescent supply current Min 1.1 to 1.4 VOHB Power-off leakage current Ta = −40 to 85°C DIR, OE , An H-level output voltage Input leakage current VCCB (V) VIHA VOHA L-level output voltage VCCA (V) μA 2007-10-19 TC7MPN3245FTG DC Characteristics (1.65 V ≤ VCCA < 2.3 V, 2.3 V ≤ VCCB ≤ 2.7 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Min Max 1.65 to 2.3 2.3 to 2.7 0.65 × VCCA ⎯ VIHB Bn 1.65 to 2.3 2.3 to 2.7 1.6 ⎯ VILA DIR, OE , An 1.65 to 2.3 2.3 to 2.7 ⎯ 0.35 × VCCA VILB Bn 1.65 to 2.3 2.3 to 2.7 ⎯ 0.7 IOHA = −100 μA 1.65 to 2.3 2.3 to 2.7 VCCA − 0.2 ⎯ IOHA = −3 mA 2.3 to 2.7 1.25 ⎯ IOHB = −100 μA 1.65 to 2.3 2.3 to 2.7 VCCB − 0.2 ⎯ 1.7 ⎯ ⎯ 0.2 2.3 to 2.7 ⎯ 0.3 IOLB = 100 μA 1.65 to 2.3 2.3 to 2.7 ⎯ 0.2 IOLB = 2 mA 1.65 to 2.3 ⎯ 0.6 ⎯ ±5.0 VIN = VIH or VIL VOHB VOLA VIN = VIH or VIL L-level output voltage VOLB IOZA 3-state output OFF state current IOZB IIN IOFF2 1.65 to 2.3 IOLA = 100 μA 1.65 to 2.3 2.3 to 2.7 IOLA = 3 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V IOFF3 ICCA ICCB 1.65 IOHB = −2 mA IOFF1 Quiescent supply current Ta = −40 to 85°C DIR, OE , An H-level output voltage Power-off leakage current VCCB (V) VIHA VOHA Input leakage current VCCA (V) VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND 1.65 2.3 2.3 1.65 to 2.3 2.3 to 2.7 V V V V μA 1.65 to 2.3 2.3 to 2.7 ⎯ ±5.0 1.65 to 2.3 2.3 to 2.7 ⎯ ±2.0 0 0 ⎯ 5.0 1.65 to 2.3 0 ⎯ 5.0 1.65 to 2.3 Open ⎯ 5.0 ⎯ 5.0 1.65 to 2.3 2.3 to 2.7 μA μA μA 1.65 to 2.3 2.3 to 2.7 ⎯ 5.0 ICCA VCCA ≤ (VIN, VOUT) ≤ 3.6 V 1.65 to 2.3 2.3 to 2.7 ⎯ ±5.0 ICCB VCCB ≤ (VIN, VOUT) ≤ 3.6 V 1.65 to 2.3 2.3 to 2.7 ⎯ ±5.0 10 Unit μA 2007-10-19 TC7MPN3245FTG DC Characteristics (1.4 V ≤ VCCA < 1.65 V, 2.3 V ≤ VCCB ≤ 2.7 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Min Max 1.4 to 1.65 2.3 to 2.7 0.65 × VCCA ⎯ VIHB Bn 1.4 to 1.65 2.3 to 2.7 1.6 ⎯ VILA DIR, OE , An 1.4 to 1.65 2.3 to 2.7 ⎯ 0.30 × VCCA VILB Bn 1.4 to 1.65 2.3 to 2.7 ⎯ 0.7 IOHA = −100 μA 1.4 to 1.65 2.3 to 2.7 VCCA − 0.2 ⎯ IOHA = −1 mA 2.3 to 2.7 1.05 ⎯ IOHB = −100 μA 1.4 to 1.65 2.3 to 2.7 VCCB − 0.2 ⎯ 1.7 ⎯ ⎯ 0.2 2.3 to 2.7 ⎯ 0.35 IOLB = 100 μA 1.4 to 1.65 2.3 to 2.7 ⎯ 0.2 IOLB = 2 mA 1.4 to 1.65 ⎯ 0.6 ⎯ ±5.0 VIN = VIH or VIL VOHB VOLA VIN = VIH or VIL L-level output voltage VOLB IOZA 3-state output OFF state current IOZB IIN IOFF2 1.4 to 1.65 IOLA = 100 μA 1.4 to 1.65 2.3 to 2.7 IOLA = 1 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V IOFF3 ICCA ICCB 1.4 IOHB = −2 mA IOFF1 Quiescent supply current Ta = −40 to 85°C DIR, OE , An H-level output voltage Power-off leakage current VCCB (V) VIHA VOHA Input leakage current VCCA (V) VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND 1.4 2.3 2.3 1.4 to 1.65 2.3 to 2.7 V V V V μA 1.4 to 1.65 2.3 to 2.7 ⎯ ±5.0 1.4 to 1.65 2.3 to 2.7 ⎯ ±2.0 0 0 ⎯ 5.0 1.4 to 1.65 0 ⎯ 5.0 1.4 to 1.65 Open ⎯ 5.0 ⎯ 5.0 1.4 to 1.65 2.3 to 2.7 μA μA μA 1.4 to 1.65 2.3 to 2.7 ⎯ 5.0 ICCA VCCA ≤ (VIN, VOUT) ≤ 3.6 V 1.4 to 1.65 2.3 to 2.7 ⎯ ±5.0 ICCB VCCB ≤ (VIN, VOUT) ≤ 3.6 V 1.4 to 1.65 2.3 to 2.7 ⎯ ±5.0 11 Unit μA 2007-10-19 TC7MPN3245FTG DC Characteristics (1.1 V ≤ VCCA < 1.4 V, 2.3 V ≤ VCCB ≤ 2.7 V) Characteristics H-level input voltage L-level input voltage Symbol Test Condition Max 2.3 to 2.7 0.65 × VCCA ⎯ VIHB Bn 1.1 to 1.4 2.3 to 2.7 1.6 ⎯ VILA DIR, OE , An 1.1 to 1.4 2.3 to 2.7 ⎯ 0.30 × VCCA VILB Bn 1.1 to 1.4 2.3 to 2.7 ⎯ 0.7 IOHA = −100 μA 1.1 to 1.4 2.3 to 2.7 VCCA − 0.2 ⎯ IOHB = −100 μA 1.1 to 1.4 2.3 to 2.7 VCCB − 0.2 ⎯ IOHB = −2 mA 1.1 to 1.4 2.3 1.7 ⎯ IOLA = 100 μA 1.1 to 1.4 2.3 to 2.7 ⎯ 0.2 VIN = VIH or VIL IOLB = 100 μA 1.1 to 1.4 2.3 to 2.7 ⎯ 0.2 1.1 to 1.4 2.3 ⎯ 0.6 1.1 to 1.4 2.3 to 2.7 ⎯ ±5.0 VIN = VIH or VIL VOLA VOLB IOZA 3-state output OFF state current IOZB IIN IOLB = 2 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL IOFF2 2.3 to 2.7 ⎯ ±5.0 VIN (DIR, OE ) = 0 to 3.6 V 1.1 to 1.4 2.3 to 2.7 ⎯ ±2.0 0 0 ⎯ 5.0 VIN, VOUT = 0 to 3.6 V 1.1 to 1.4 0 ⎯ 5.0 1.1 to 1.4 Open ⎯ 5.0 1.1 to 1.4 2.3 to 2.7 ⎯ 5.0 IOFF3 ICCA ICCB VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND V V V V μA μA μA 1.1 to 1.4 2.3 to 2.7 ⎯ 5.0 ICCA VCCA ≤ (VIN, VOUT) ≤ 3.6 V 1.1 to 1.4 2.3 to 2.7 ⎯ ±5.0 ICCB VCCB ≤ (VIN, VOUT) ≤ 3.6 V 1.1 to 1.4 2.3 to 2.7 ⎯ ±5.0 12 Unit μA 1.1 to 1.4 VOUT = 0 to 3.6 V IOFF1 Quiescent supply current Min 1.1 to 1.4 VOHB Power-off leakage current Ta = −40 to 85°C DIR, OE , An H-level output voltage Input leakage current VCCB (V) VIHA VOHA L-level output voltage VCCA (V) μA 2007-10-19 TC7MPN3245FTG DC Characteristics (1.1 V ≤ VCCA < 1.4 V, 1.65 V ≤ VCCB < 2.3 V) Characteristics Symbol Test Condition VCCA (V) VCCB (V) Ta = −40 to 85°C Min Max VIHA DIR, OE , An 1.1 to 1.4 1.65 to 2.3 0.65 × VCCA ⎯ VIHB Bn 1.1 to 1.4 1.65 to 2.3 0.65 × VCCB ⎯ VILA DIR, OE , An 1.1 to 1.4 1.65 to 2.3 ⎯ 0.30 × VCCA 1.1 to 1.4 1.65 to 2.3 ⎯ 0.35 × VCCB IOHA = −100 μA 1.1 to 1.4 1.65 to 2.3 VCCA − 0.2 ⎯ IOHB = −100 μA 1.1 to 1.4 1.65 to 2.3 VCCB − 0.2 ⎯ IOHB = −0.5 mA 1.1 to 1.4 1.25 ⎯ IOLA = 100 μA 1.1 to 1.4 1.65 to 2.3 ⎯ 0.2 VIN = VIH or VIL IOLB = 100 μA 1.1 to 1.4 1.65 to 2.3 ⎯ 0.2 1.1 to 1.4 ⎯ 0.3 ⎯ ±5.0 H-level input voltage L-level input voltage VILB Bn VOHA VIN = VIH or VIL H-level output voltage VOHB VOLA L-level output voltage VOLB IOZA 3-state output OFF state current IOZB Input leakage current IIN IOLB = 0.5 mA VIN = VIH or VIL VOUT = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN (DIR, OE ) = 0 to 3.6 V IOFF1 Power-off leakage current IOFF2 VIN, VOUT = 0 to 3.6 V IOFF3 ICCA Quiescent supply current ICCB VINA = VCCA or GND VINB = VCCB or GND VINA = VCCA or GND VINB = VCCB or GND 1.65 1.65 1.1 to 1.4 1.65 to 2.3 V V V V μA 1.1 to 1.4 1.65 to 2.3 ⎯ ±5.0 1.1 to 1.4 1.65 to 2.3 ⎯ ±2.0 0 0 ⎯ 5.0 1.1 to 1.4 0 ⎯ 5.0 1.1 to 1.4 Open ⎯ 5.0 ⎯ 5.0 1.1 to 1.4 1.65 to 2.3 μA μA μA 1.1 to 1.4 1.65 to 2.3 ⎯ 5.0 ICCA VCCA ≤ (VIN, VOUT) ≤ 3.6 V 1.1 to 1.4 1.65 to 2.3 ⎯ ±5.0 ICCB VCCB ≤ (VIN, VOUT) ≤ 3.6 V 1.1 to 1.4 1.65 to 2.3 ⎯ ±5.0 13 Unit μA 2007-10-19 TC7MPN3245FTG AC Characteristics (Ta = −40 to 85°C, Input: tr = tf = 2.0 ns) VCCA = 2.5 ± 0.2 V, VCCB= 3.3 ± 0.3 V Characteristics Propagation delay time Symbol tpLH (Bn → An) tpHL 3-state output enable time tpZL ( OE → An) 3-state output disable time ( OE → An) Propagation delay time tpZH tpLZ tpHZ tpLH (An → Bn) tpHL 3-state output enable time tpZL ( OE → Bn) 3-state output disable time ( OE → Bn) Output-to-output skew tpZH tpLZ tpHZ Test Condition Min Max Figure 1, Figure 2 1.0 5.4 Figure 1, Figure 3 1.0 8.4 Figure 1, Figure 3 1.0 6.7 Figure 1, Figure 2 1.0 13.7 Figure 1, Figure 3 1.0 16.6 Figure 1, Figure 3 1.0 7.2 ⎯ 0.5 ns Min Max Unit Figure 1, Figure 2 1.0 8.9 Figure 1, Figure 3 1.0 13.4 Figure 1, Figure 3 1.0 10.9 Figure 1, Figure 2 1.0 14.8 Figure 1, Figure 3 1.0 18.9 Figure 1, Figure 3 1.0 8.7 ⎯ 0.5 tosLH (Note) tosHL Unit ns ns Note: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) VCCA = 1.8 ± 0.15 V, VCCB = 3.3 ± 0.3 V Characteristics Propagation delay time Symbol tpLH (Bn → An) tpHL 3-state output enable time tpZL ( OE → An) 3-state output disable time ( OE → An) Propagation delay time tpZH tpLZ tpHZ tpLH (An → Bn) tpHL 3-state output enable time tpZL ( OE → Bn) 3-state output disable time ( OE → Bn) Output-to-output skew tpZH tpLZ tpHZ Test Condition tosLH (Note) tosHL ns ns ns Note: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) 14 2007-10-19 TC7MPN3245FTG VCCA = 1.5 ± 0.1 V, VCCB = 3.3 ± 0.3 V Characteristics Propagation delay time Symbol tpLH (Bn → An) tpHL 3-state output enable time tpZL ( OE → An) 3-state output disable time ( OE → An) Propagation delay time tpZH tpLZ tpHZ tpLH (An → Bn) tpHL 3-state output enable time tpZL ( OE → Bn) 3-state output disable time ( OE → Bn) Output-to-output skew tpZH tpLZ tpHZ Test Condition Min Max Figure 1, Figure 2 1.0 10.3 Figure 1, Figure 3 1.0 18.5 Figure 1, Figure 3 1.0 13.0 Figure 1, Figure 2 1.0 16.0 Figure 1, Figure 3 1.0 22.8 Figure 1, Figure 3 1.0 10.2 ⎯ 1.5 ns Min Max Unit Figure 1, Figure 2 1.0 61 Figure 1, Figure 3 1.0 95 Figure 1, Figure 3 1.0 44 Figure 1, Figure 2 1.0 29 Figure 1, Figure 3 1.0 63 Figure 1, Figure 3 1.0 23 ⎯ 1.5 tosLH (Note) tosHL Unit ns ns Note: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) VCCA = 1.2 ± 0.1 V, VCCB = 3.3 ± 0.3 V Characteristics Propagation delay time Symbol tpLH (Bn → An) tpHL 3-state output enable time tpZL ( OE → An) 3-state output disable time ( OE → An) Propagation delay time tpZH tpLZ tpHZ tpLH (An → Bn) tpHL 3-state output enable time tpZL ( OE → Bn) 3-state output disable time ( OE → Bn) Output-to-output skew tpZH tpLZ tpHZ Test Condition tosLH (Note) tosHL ns ns ns Note: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) 15 2007-10-19 TC7MPN3245FTG VCCA = 1.8 ± 0.15 V, VCCB = 2.5 ± 0.2 V Characteristics Propagation delay time Symbol tpLH (Bn → An) tpHL 3-state output enable time tpZL ( OE → An) 3-state output disable time ( OE → An) Propagation delay time tpZH tpLZ tpHZ tpLH (An → Bn) tpHL 3-state output enable time tpZL ( OE → Bn) 3-state output disable time ( OE → Bn) Output-to-output skew tpZH tpLZ tpHZ Test Condition Min Max Figure 1, Figure 2 1.0 9.1 Figure 1, Figure 3 1.0 13.5 Figure 1, Figure 3 1.0 11.8 Figure 1, Figure 2 1.0 18.5 Figure 1, Figure 3 1.0 23.6 Figure 1, Figure 3 1.0 6.9 ⎯ 0.5 ns Min Max Unit Figure 1, Figure 2 1.0 10.8 Figure 1, Figure 3 1.0 18.3 Figure 1, Figure 3 1.0 14.2 Figure 1, Figure 2 1.0 19.7 Figure 1, Figure 3 1.0 26.6 Figure 1, Figure 3 1.0 8.3 ⎯ 1.5 tosLH (Note) tosHL Unit ns ns Note: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) VCCA = 1.5 ± 0.1 V, VCCB = 2.5 ± 0.2 V Characteristics Propagation delay time Symbol tpLH (Bn → An) tpHL 3-state output enable time tpZL ( OE → An) 3-state output disable time ( OE → An) Propagation delay time tpZH tpLZ tpHZ tpLH (An → Bn) tpHL 3-state output enable time tpZL ( OE → Bn) 3-state output disable time ( OE → Bn) Output-to-output skew tpZH tpLZ tpHZ Test Condition tosLH (Note) tosHL ns ns ns Note: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) 16 2007-10-19 TC7MPN3245FTG VCCA = 1.2 ± 0.1 V, VCCB = 2.5 ± 0.2 V Characteristics Propagation delay time Symbol tpLH (Bn → An) tpHL 3-state output enable time tpZL ( OE → An) 3-state output disable time ( OE → An) Propagation delay time tpZH tpLZ tpHZ tpLH (An → Bn) tpHL 3-state output enable time tpZL ( OE → Bn) 3-state output disable time ( OE → Bn) Output-to-output skew tpZH tpLZ tpHZ Test Condition Min Max Figure 1, Figure 2 1.0 60 Figure 1, Figure 3 1.0 95 Figure 1, Figure 3 1.0 45 Figure 1, Figure 2 1.0 33 Figure 1, Figure 3 1.0 66 Figure 1, Figure 3 1.0 20 ⎯ 1.5 ns Min Max Unit Figure 1, Figure 2 1.0 58 Figure 1, Figure 3 1.0 92 Figure 1, Figure 3 1.0 47 Figure 1, Figure 2 1.0 43 Figure 1, Figure 3 1.0 78 Figure 1, Figure 3 1.0 20 ⎯ 1.5 tosLH (Note) tosHL Unit ns ns Note: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) VCCA = 1.2 ± 0.1 V, VCCB = 1.8 ± 0.15 V Characteristics Propagation delay time Symbol tpLH (Bn → An) tpHL 3-state output enable time tpZL ( OE → An) 3-state output disable time ( OE → An) Propagation delay time tpZH tpLZ tpHZ tpLH (An → Bn) tpHL 3-state output enable time tpZL ( OE → Bn) 3-state output disable time ( OE → Bn) Output-to-output skew tpZH tpLZ tpHZ Test Condition tosLH (Note) tosHL ns ns ns Note: Parameter guaranteed by design. (tosLH = |tpLHm − tpLHn|, tosHL = |tpHLm − tpHLn|) 17 2007-10-19 TC7MPN3245FTG Dynamic Switching Characteristics (Ta = 25°C, Input: tr = tf = 2.0 ns, CL = 30 pF) Characteristics Symbol Test Condition VCCA (V) VCCB (V) A→B Quiet output maximum dynamic VOL VOLP VIH = VCC, VIL = 0 V (Note) B→A A→B Quiet output minimum dynamic VOL VOLV VIH = VCC, VIL = 0 V (Note) B→A A→B Quiet output maximum dynamic VOH VOHP VIH = VCC, VIL = 0 V (Note) B→A A→B Quiet output minimum dynamic VOH VOHV VIH = VCC, VIL = 0 V (Note) B→A Typ. 2.5 3.3 0.35 1.8 3.3 0.35 1.8 2.5 0.25 2.5 3.3 0.6 1.8 3.3 0.25 1.8 2.5 0.25 2.5 3.3 −0.35 1.8 3.3 −0.35 1.8 2.5 −0.25 2.5 3.3 −0.6 1.8 3.3 −0.25 1.8 2.5 −0.25 2.5 3.3 2.65 1.8 3.3 2.65 1.8 2.5 2.05 2.5 3.3 1.7 1.8 3.3 1.3 1.8 2.5 1.3 2.5 3.3 3.95 1.8 3.3 3.95 1.8 2.5 2.95 2.5 3.3 3.3 1.8 3.3 2.3 1.8 2.5 2.3 Unit V V V V Note: Parameter guaranteed by design. Capacitive Characteristics (Ta = 25°C) Characteristics Symbol Test Circuit VCCA (V) VCCB (V) Typ. Unit Input capacitance CIN DIR, OE 2.5 3.3 7 pF Bus I/O capacitance CI/O An, Bn 2.5 3.3 8 pF A → B (DIR = “H”) 2.5 3.3 3 B → A (DIR = “L”) 2.5 3.3 16 A → B (DIR = “H”) 2.5 3.3 0 B → A (DIR = “L”) 2.5 3.3 0 A → B (DIR = “H”) 2.5 3.3 16 B → A (DIR = “L”) 2.5 3.3 5 A → B (DIR = “H”) 2.5 3.3 0 B → A (DIR = “L”) 2.5 3.3 0 OE = “L” CPDA OE = “H” Power dissipation capacitance (Note) OE = “L” CPDB OE = “H” pF Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD･VCC･fIN + ICC/4 (per bit) 18 2007-10-19 TC7MPN3245FTG AC Test Circuit RL2 Switch Output 6.0 V or VCC × 2 Open GND Parameter Switch tpLH, tpHL Open RL1 CL Measure 6.0 V @ VCC = 3.3 ± 0.3 V VCC × 2 @ VCC = 2.5 ± 0.2 V tpLZ, tpZL @ VCC = 1.8 ± 0.15 V @ VCC = 1.5 ± 0.1 V @ VCC = 1.2 ± 0.1 V tpHZ, tpZH GND VCC (output) Symbol 3.3 ± 0.3 V 2.5 ± 0.2 V 1.8 ± 0.15 V 1.5 ± 0.1 V 1.2 ± 0.1 V RL1/2A 500 Ω 1 kΩ 2 kΩ 10 kΩ CLA 30 pF 30 pF 15 pF 15 pF RL1B ⎯ ⎯ ⎯ ⎯ RL2B 1 kΩ 1 kΩ 1 kΩ 1 kΩ CLB 30 pF 30 pF 30 pF 30 pF Figure 1 19 2007-10-19 TC7MPN3245FTG AC Waveform tf 2.0 ns tr 2.0 ns VIH 90% VM Input (An, Bn) 10% GND VOH Output (Bn, An) VM tpLH VOL tpHL Figure 2 tpLH, tpHL tf 2.0 ns tr 2.0 ns 90% VM Output enable control ( OE ) VIH 10% tpLZ GND tpZL 3.0 V or VCC Output (An, Bn) low to off to low tpHZ VM VX VOH VY Output (An, Bn) high to off to high VOL tpZH VM GND Outputs enabled Outputs disabled Outputs enabled Figure 3 tpLZ, tpHZ, tpZL, tpZH Symbol VCC 3.3 ± 0.3 V 2.5 ± 0.2 V 1.8 ± 0.15 V 1.5 ± 0.1 V 1.2 ± 0.1 V VIH 2.7 V VCC VCC VM 1.5 V VCC/2 VCC/2 VX VOL + 0.3 V VOL + 0.15 V VOL + 0.1 V VY VOH − 0.3 V VOH − 0.15 V VOH − 0.1 V 20 2007-10-19 TC7MPN3245FTG Package Dimensions Weight: 0.03 g (typ.) 21 2007-10-19 TC7MPN3245FTG RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 22 2007-10-19