VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. www.vishay.com Vishay Semiconductors Power Mini SMD LED FEATURES • Utilizing latest advanced AlInGaP technology • Available in 8 mm tape • Luminous intensity and color categorized per packing unit • Luminous intensity ratio per packing unit IVmax./IVmin. 1.6 • ESD-withstand voltage: Up to 2 kV according to JESD22-A114-B • Preconditioning according to JEDEC level 2a 19226 • IR reflow soldering DESCRIPTION • AEC-Q101 qualified The new MiniLED series has been designed in a small white SMT package. The feature of the device is the very small package 2.3 mm x 1.3 mm x 1.4 mm. The MiniLED is an obvious solution for small-scale, high-power products that are expected to work reliably in an arduous environment. This is often the case in automotive and industrial application. • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Traffic signals and signs • Interior and exterior lighting • Dashboard illumination PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Indicator and backlighting purposes for audio, video, LCDs switches, symbols, illuminated advertising etc. • Product series: power • Package: SMD MiniLED • Angle of half intensity: ± 60° PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF TECHNOLOGY (mA) MIN. TYP. MAX. VLMS233T1V1-GS08 Super red 280 450 900 20 626 630 639 20 1.8 2.0 2.6 20 VLMR233T2V2-GS08 Red 355 650 1120 20 619 625 631 20 1.8 2.0 2.6 20 AlInGaP on Si AlInGaP on Si VLMK233U1AA-GS08 Amber 450 680 1400 20 611 616 622 20 1.8 2.1 2-6 20 AlInGaP on Si VLMO233U1AA-GS08 Soft orange 450 760 1400 20 600 605 611 20 1.8 2.1 2.6 20 AlInGaP on Si VLMO233U2V2-35-GS08 Soft orange 560 760 1120 20 602 605 609 20 1.8 2.1 2.6 20 AlInGaP on Si VLMY233T2V2-GS08 355 650 1120 20 583 589 594 20 1.8 2.15 2.6 20 AlInGaP on Si Yellow ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. PARAMETER TEST CONDITION SYMBOL VALUE Short term application only VR 5 V Tamb 60 °C (480 K/W) IF 50 mA Power dissipation PV 130 mW Junction temperature Tj 125 °C Tamb - 40 to + 100 °C Tstg - 40 to + 100 °C RthJA 480 K/W Reverse voltage (1) DC Forward current Operating temperature range Storage temperature range Thermal resistance junction/ambient Mounted on PC board (pad size > 16 mm2) UNIT Note (1) Driving the LED in reverse direction is suitable for a short term application only Rev. 1.2, 30-Apr-13 Document Number: 82423 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMS233.., SUPER RED PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMS233T1V1 IV 280 450 900 mcd V/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA d 626 630 639 nm Peak wavelength IF = 20 mA p - 639 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA - 18 - nm deg Angle of half intensity IF = 20 mA - ± 60 - Forward voltage IF = 20 mA VF 1.8 2 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMR233.., RED PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMR233T2V2 IV 355 650 1120 mcd V/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA d 619 625 631 nm Peak wavelength IF = 20 mA p - 632 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA - 18 - nm deg Angle of half intensity IF = 20 mA - ± 60 - Forward voltage IF = 20 mA VF 1.8 2 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMK233.., AMBER PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMK233U1AA IV 450 680 1400 mcd V/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA d 611 616 622 nm Peak wavelength IF = 20 mA p - 622 - nm - 18 - Spectral bandwidth at 50 % Irel max. IF = 20 mA Angle of half intensity IF = 20 mA Forward voltage IF = 20 mA VF Reverse current VR = 5 V IR ± 60 1.8 nm deg 2.1 2.6 V 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMO233.., SOFT ORANGE PARAMETER Luminous intensity TEST CONDITION IF = 20 mA PART VLMO233U1AA VLMO233U2V2-35 SYMBOL IV MIN. TYP. MAX. 450 760 1400 560 760 1120 600 605 611 nm 602 605 609 nm V/IV Luminous flux/luminous intensity VLMO233U1AA d Dominant wavelength IF = 20 mA Peak wavelength IF = 20 mA p VLMO233U2V2-35 3 UNIT mcd mlm/mcd 611 nm Spectral bandwidth at 50 % Irel max. IF = 20 mA 17 nm Angle of half intensity IF = 20 mA ± 60 deg Forward voltage IF = 20 mA VF Reverse current VR = 5 V IR Rev. 1.2, 30-Apr-13 1.8 2.1 2.6 V 0.01 10 μA Document Number: 82423 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMY233.., YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMY233T2V2 IV 355 650 1120 Luminous intensity V/IV Luminous flux/luminous intensity 3 UNIT mcd mlm/mcd Dominant wavelength IF = 20 mA d Peak wavelength IF = 20 mA p 591 nm Spectral bandwidth at 50 % Irel max. IF = 20 mA 17 nm Angle of half intensity IF = 20 mA Forward voltage IF = 20 mA VF Reverse current VR = 5 V IR 583 589 594 nm ± 60 1.8 deg 2.15 2.6 V 0.01 10 μA COLOR CLASSIFICATION DOMINANT WAVELENGTH (nm) GROUP AMBER SOFT ORANGE MIN. MAX. 1 611 618 2 614 622 YELLOW MIN. MAX. MIN. MAX. 600 603 583 586 3 602 605 585 588 4 604 607 587 590 5 606 609 589 592 6 608 611 591 594 Note • Wavelengths are tested at a current pulse duration of 25 ms. LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD LUMINOUS INTENSITY (mcd) CROSSING TABLE OPTIONAL MIN. MAX. VISHAY VLMS233T1V1 OSRAM LS M67F-S2U2-1 1 280 355 VLMO233U2V2-35 LO M67F-U2AB-24 2 355 450 VLMY233T2V2 LY M67F-T2V2-36 1 450 560 2 560 710 1 710 900 2 900 1120 A 1120 1400 B 1400 1800 T U V A Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. Rev. 1.2, 30-Apr-13 Document Number: 82423 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 100 1.2 70 RthJA = 480 K/W 60 1.0 Irel - Relative Intensity IF - Max. Permissible Forward Current (mA) 80 50 40 30 20 amber soft orange yellow 90 red super red 0.8 0.6 0.4 0.2 10 0 540 560 580 600 620 640 660 680 0 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) 22583 Fig. 4 - Relative Intensity vs. Wavelength Fig. 1 - Maximum Permissible Forward Current vs. Ambient Temperature 0° 10° 20° 100 0.9 50° 0.8 60° 70° IF - Forward Current (mA) 40° 1.0 ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 0.7 λ - Wavelenght (nm) 22184 yellow soft orange amber red super red 10 80° 1 0.6 0.4 0.2 0 1 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement IV rel - Relative Luminous Intensity IF - Forward Current (A) 0.08 tp/T = 0.005 0.05 0.5 0.06 0.04 0.02 0.00 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 17044 101 102 tp - Pulse Length (s) Fig. 3 - Forward Current vs. Pulse Length Rev. 1.2, 30-Apr-13 2 2.5 3 3.5 Fig. 5 - Forward Current vs. Forward Voltage 0.12 0.10 1.5 VF - Forward Voltage (V) 22185 10 yellow soft orange amber red super red 1 0.1 0.01 1 22186 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 82423 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. ΔVF - Change of Forward Voltage (mV) www.vishay.com Vishay Semiconductors 300 yellow soft orange amber red super red 200 100 0 - 100 - 200 - 300 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 22187 Fig. 7 - Change of Forward Voltage vs. Ambient Temperature IV rel - Relative Luminous Intensity 2.5 2.0 yellow soft orange amber red 1.5 1.0 super red 0.5 0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 22188 Δλd - Change Dominant Wavelength (nm) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature 10 8 yellow 6 soft orange 4 2 0 amber red super red -2 -4 -6 -8 - 40 - 20 22189 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 9 - Change of Dominant Wavelength vs. Ambient Temperature Rev. 1.2, 30-Apr-13 Document Number: 82423 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 2.2 ± 0.1 0.1 ± 0.05 1.3 ± 0.1 (1.2) 1.4 ± 0.1 0.7 ± 0.1 2.1 ± 0.1 0.9 ± 0.1 0.4 ± 0.1 Anode mark Not indicated tolerances ± 0.2 (0.9) Proposed pad layout (for reference only) 0.8 (1.5) 2.8 Area not flat 1 0.8 technical drawings according to DIN specifications Solder resist Drawing refers to following types: VLM. 233. Drawing-No.: 6.541-5090.01-4 Issue: 1; 15.07.11 Cu-area > 5 mm2 22584 Rev. 1.2, 30-Apr-13 Document Number: 82423 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 1.58 8° m 4 ax . 2 1.5 ax . 1.58 1.75 4 2.38 8 3.5 7° m K A 0.254 1 technical drawings according to DIN specifications Drawing refers to following types: Mini SMD LED VLM. 233. Drawing-No.: 9.700-5381.01-4 Issue: 1; 15.07.11 22585 LEADER AND TRAILER DIMENSIONS in millimeters Trailer no devices Leader devices no devices End Start min. 200 min. 400 96 11818 GS08 = 3000 pcs COVER TAPE PEEL STRENGTH LABEL According to DIN EN 60286-3 Standard bar code labels for finished goods 0.1 N to 1.3 N The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final packing area. The standard packing units are labeled with standard bar code labels before transported as finished goods to warehouses. The labels are on each packing unit and contain Vishay Semiconductor GmbH specific data. 300 ± 10 mm/min 165° to 180° peel angle Rev. 1.2, 30-Apr-13 Document Number: 82423 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS233.., VLMR233.., VLMK233.., VLMO233.., VLMY233.. www.vishay.com Vishay Semiconductors SOLDERING PROFILE FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 300 Temperature (°C) RECOMMENDED METHOD OF STORAGE max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 200 max. 30 s 150 max. 100 s max. 120 s • Storage temperature 10 °C to 30 °C 100 • Storage humidity 60 % RH max. max. ramp down 6 °C/s max. ramp up 3 °C/s 50 0 0 50 100 150 Time (s) 19885 200 250 300 After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: max. 2 cycles allowed Fig. 10 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) 192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. BAR CODE PRODUCT LABEL (example) A An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. B C D L L E V E L CAUTION I E G F H M K A. 2D barcode B. PartNo = Vishay part number C. QTY = Quantity D. SelCode = selection code (binning) E. PTC = Code of manufacturing plant F. Batch = date code: year/week/plant code G. Region code H. SL = sales location I. Terminations finishing J. Lead (Pb)-free symbol K. Halogen-free symbol L. RoHS symbol This bag contains MOISTURE –SENSITIVE DEVICES 2a 1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH) 2. After this bag is opened devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 260°C) must be: a) Mounted within 672 hours at factory condition of < 30°C/60%RH or b) Stored at <10% RH. 3. Devices require baking before mounting if: a) Humidity Indicator Card is >10% when read at 23°C + 5°C or b) 2a or 2b is not met. 4. If baking is required, devices may be baked for: 192 hours at 40°C + 5°C/-0°C and <5%RH (dry air/nitrogen) or o or 96 hours at 60±5 Cand <5%RH For all device containers 24 hours at 100±5°C Not suitable for reels or tubes Bag Seal Date: ______________________________ (If blank, see bar code label) Note: LEVEL defined by EIA JEDEC Standard JESD22-A113 19786 Example of JESD22-A112 level 2a label DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag Label Reel ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABEL The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. 15973 Rev. 1.2, 30-Apr-13 Document Number: 82423 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000