TA78M05,06,08,09,10,12,15,18,20,24F TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA78M05F, TA78M06F, TA78M08F, TA78M09F, TA78M10F, TA78M12F, TA78M15F, TA78M18F, TA78M20F, TA78M24F Output Current of 0.5 A, Three-Terminal Positive Voltage Regulators 5 V, 6 V, 8 V, 9 V, 10 V, 12 V, 15 V, 18 V, 20 V, 24 V The TA78M××F series of fixed-voltage monolithic integrated circuit voltage regulators is designed for a wide range of applications. These regulators employ internal current-limiting, thermal-shutdown and safe-area compensation, making them essentially indestructible. One of these regulators can drive up to 0.5 A of output current. Features z Suitable for CMOS, TTL and the power supply of the other digital ICs z Maximum output current of 0.5 A. z Internal thermal overload protection. z Internal short circuit current limiting. z Packaged in POWER MOLD. Pin Assignment Weight HSIP3-P-2.30B: 0.36 g (typ.) HSOP3-P-2.30A: 0.36 g (typ.) Marking side 1 3 IN GND (CASE) 2 OUT Marking TA78M**F Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 1 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F Equivalent Circuit Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit TA78M05F TA78M06F TA78M08F 35 TA78M09F Input voltage TA78M10F TA78M12F VIN V TA78M15F TA78M18F 40 TA78M20F TA78M24F Power dissipation (Ta = 25°C) (Tc = 25°C) PD 1 10 W Operating temperature Topr −30~85 °C Storage temperature Tstg −55~150 °C Junction temperature Tj 150 °C Rth (j-c) 12.5 Rth (j-a) 125 Thermal resistance °C/W Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 2 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M05F Electrical Characteristics (Unless otherwise specified, VIN = 10 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 4.8 5.0 5.2 V 7 V ≤ VIN ≤ 25 V, IOUT = 200 mA ― 4 100 8 V ≤ VIN ≤ 25 V, IOUT = 200 mA ― 2 50 5 mA ≤ IOUT ≤ 500 mA ― 25 100 5 mA ≤ IOUT ≤ 200 mA ― 10 50 7 V ≤ VIN ≤ 20 V, 5 mA ≤ IOUT ≤ 350 mA 4.75 ― 5.25 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.5 8.0 Line ΔIBI 1 8.5 V ≤ VIN ≤ 25.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 50 200 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 8 V ≤ VIN ≤ 18 V, Tj = 25°C 60 67 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −0.6 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 3 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M06F Electrical Characteristics (Unless otherwise specified, VIN = 11 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 5.75 6.0 6.25 V 8 V ≤ VIN ≤ 25 V, IOUT = 200 mA ― 4 100 9 V ≤ VIN ≤ 25 V, IOUT = 200 mA ― 2 50 5 mA ≤ IOUT ≤ 500 mA ― 25 120 5 mA ≤ IOUT ≤ 200 mA ― 10 60 8 V ≤ VIN ≤ 21 V, 5 mA ≤ IOUT ≤ 350 mA 5.7 ― 6.3 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.5 8.0 Line ΔIBI 1 9.5 V ≤ VIN ≤ 25.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 55 220 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 9 V ≤ VIN ≤ 19 V, Tj = 25°C 58 65 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −0.7 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 4 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M08F Electrical Characteristics (Unless otherwise specified, VIN = 14 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 7.7 8.0 8.3 V 10.5 V ≤ VIN ≤ 25 V, IOUT = 200 mA ― 5 100 11 V ≤ VIN ≤ 25 V, IOUT = 200 mA ― 3 50 5 mA ≤ IOUT ≤ 500 mA ― 26 160 5 mA ≤ IOUT ≤ 200 mA ― 10 80 10.5 V ≤ VIN ≤ 23 V, 5 mA ≤ IOUT ≤ 350 mA 7.6 ― 8.4 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.6 8.0 Line ΔIBI 1 11 V ≤ VIN ≤ 25.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 60 250 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 11.5 V ≤ VIN ≤ 21.5 V, Tj = 25°C 55 62 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −1.0 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 5 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M09F Electrical Characteristics (Unless otherwise specified, VIN = 15 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 8.64 9.0 9.36 V 11.5 V ≤ VIN ≤ 26 V, IOUT = 200 mA ― 5 100 13 V ≤ VIN ≤ 26 V, IOUT = 200 mA ― 3 50 5 mA ≤ IOUT ≤ 500 mA ― 26 180 5 mA ≤ IOUT ≤ 200 mA ― 10 90 11.5 V ≤ VIN ≤ 24 V, 5 mA ≤ IOUT ≤ 350 mA 8.55 ― 9.45 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.6 8.0 Line ΔIBI 1 12 V ≤ VIN ≤ 26.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 60 270 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 12.5 V ≤ VIN ≤ 22.5 V, Tj = 25°C 54 61 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −1.1 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 6 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M10F Electrical Characteristics (Unless otherwise specified, VIN = 16 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 9.6 10.0 10.4 V 12.5 V ≤ VIN ≤ 26 V, IOUT = 200 mA ― 6 100 14 V ≤ VIN ≤ 26 V, IOUT = 200 mA ― 3 50 5 mA ≤ IOUT ≤ 500 mA ― 26 200 5 mA ≤ IOUT ≤ 200 mA ― 10 100 12.5 V ≤ VIN ≤ 25 V, 5 mA ≤ IOUT ≤ 350 mA 9.5 ― 10.5 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.7 8.0 Line ΔIBI 1 13 V ≤ VIN ≤ 26.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 65 280 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 13.5 V ≤ VIN ≤ 23.5 V, Tj = 25°C 52 59 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −1.3 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 7 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M12F Electrical Characteristics (Unless otherwise specified, VIN = 19 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 11.5 12.0 12.5 V 14.5 V ≤ VIN ≤ 30 V, IOUT = 200 mA ― 7 100 16 V ≤ VIN ≤ 30 V, IOUT = 200 mA ― 3 50 5 mA ≤ IOUT ≤ 500 mA ― 27 240 5 mA ≤ IOUT ≤ 200 mA ― 10 120 14.5 V ≤ VIN ≤ 27 V, 5 mA ≤ IOUT ≤ 350 mA 11.4 ― 12.6 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.8 8.0 Line ΔIBI 1 15 V ≤ VIN ≤ 30.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 70 300 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 15 V ≤ VIN ≤ 25 V, Tj = 25°C 50 57 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −1.6 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 8 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M15F Electrical Characteristics (Unless otherwise specified, VIN = 23 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 14.4 15.0 15.6 V 17.5 V ≤ VIN ≤ 30 V, IOUT = 200 mA ― 8 100 20 V ≤ VIN ≤ 30 V, IOUT = 200 mA ― 4 50 5 mA ≤ IOUT ≤ 500 mA ― 27 300 5 mA ≤ IOUT ≤ 200 mA ― 10 150 17.5 V ≤ VIN ≤ 30 V, 5 mA ≤ IOUT ≤ 350 mA 14.25 ― 15.75 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.8 8.0 Line ΔIBI 1 18 V ≤ VIN ≤ 30.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 80 450 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 18.5 V ≤ VIN ≤ 28.5 V, Tj = 25°C 48 55 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −2.0 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 9 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M18F Electrical Characteristics (Unless otherwise specified, VIN = 27 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 17.3 18.0 18.7 V 21 V ≤ VIN ≤ 33 V, IOUT = 200 mA ― 9 100 24 V ≤ VIN ≤ 33 V, IOUT = 200 mA ― 5 50 5 mA ≤ IOUT ≤ 500 mA ― 28 360 5 mA ≤ IOUT ≤ 200 mA ― 10 180 21 V ≤ VIN ≤ 33 V, 5 mA ≤ IOUT ≤ 350 mA 17.1 ― 18.9 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.8 8.0 Line ΔIBI 1 21.5 V ≤ VIN ≤ 33.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 90 490 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 22 V ≤ VIN ≤ 32 V, Tj = 25°C 46 53 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −2.5 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 10 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M20F Electrical Characteristics (Unless otherwise specified, VIN = 29 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 19.2 20.0 20.8 V 23 V ≤ VIN ≤ 35 V, IOUT = 200 mA ― 10 100 24 V ≤ VIN ≤ 35 V, IOUT = 200 mA ― 6 50 5 mA ≤ IOUT ≤ 500 mA ― 28 400 5 mA ≤ IOUT ≤ 200 mA ― 10 200 23 V ≤ VIN ≤ 35 V, 5 mA ≤ IOUT ≤ 350 mA 19.0 ― 21.0 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 4.9 8.0 Line ΔIBI 1 23.5 V ≤ VIN ≤ 35.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 95 540 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 24 V ≤ VIN ≤ 34 V, Tj = 25°C 46 53 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −3.0 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 11 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F TA78M24F Electrical Characteristics (Unless otherwise specified, VIN = 33 V, IOUT = 350 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Characteristics Output voltage Line regulation Symbol Test Circuit VOUT 1 Reg·line 1 Test Condition Min Typ. Max Unit 23.0 24.0 25.0 V 27 V ≤ VIN ≤ 38 V, IOUT = 200 mA ― 12 100 28 V ≤ VIN ≤ 38 V, IOUT = 200 mA ― 7 50 5 mA ≤ IOUT ≤ 500 mA ― 30 480 5 mA ≤ IOUT ≤ 200 mA ― 10 240 27 V ≤ VIN ≤ 38 V, 5 mA ≤ IOUT ≤ 350 mA 22.8 ― 25.2 V mA Tj = 25°C Tj = 25°C mV mV Load regulation Reg·load 1 Tj = 25°C Output voltage VOUT 1 Tj = 25°C IB 1 Tj = 25°C ― 5.0 8.0 Line ΔIBI 1 27.5 V ≤ VIN ≤ 38.5 V, Tj = 25°C IOUT = 200 mA ― ― 0.8 Load ΔIBO 1 ― ― 0.5 Output noise voltage VNO 2 Ta = 25°C, 10 Hz ≤ f ≤ 100 kHz ― 115 650 μVrms Ripple rejection R.R. 3 f = 120 Hz, IOUT = 100 mA, 28 V ≤ VIN ≤ 38 V, Tj = 25°C 46 53 ― dB Short circuit current limit ISC 1 Tj = 25°C ― 960 ― mA Dropout voltage VD 1 Tj = 25°C ― 1.7 ― V TCVO 1 IOUT = 5 mA ― −3.5 ― mV/°C Quiescent current Quiescent current change Average temperature coefficient of output voltage 5 mA ≤ IOUT ≤ 350 mA 12 mA 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F Test Circuit 1/Standard Application Test Circuit 2 VNO Test Circuit 3 R.R. 13 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F 14 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F 15 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F Precautions on Application (1) In regard to GND, be careful not to apply a negative voltage to the input/output terminal. Further, special care is necessary in the case of a voltage boost application. (2) If a surge voltage exceeding the absolute maximum rating is applied to the input terminal or if a voltage in excess of the input terminal voltage is applied to the output terminal, the circuit may be destroyed. Particular care is necessary in the case of the latter. Circuit destruction may also occur if the input terminal shorts to GND in a state of normal operation, causing the output terminal voltage to exceed the input voltage (GND potential) and the electrical charge of the chemical capacitor connected to the output terminal to flow into the input side. Where these risks exist, take steps such as connecting zener and general silicon diodes to the circuit, as shown in the figure below. (3) When the input voltage is too high, the power dissipation of the three-terminal regulator, which is a series regulator, increases, causing the junction temperature to rise. In such a case, it is recommended to reduce the power dissipation, and hence the junction temperature, by inserting a power-limiting resistor RSD in the input terminal. VIN RSD VIN’ 1 TA78MxxF SERIES 2 VOUT lOUT 3 IB The power dissipation PD of the IC is expressed in the following equation. Reducing VIN' below the lowest voltage necessary for the IC will cause ripple, deterioration in output regulation and, in certain circumstances, parasitic oscillation. To determine the resistance value of RSD, design with a margin, referring to the following equation. (4) Be sure to connect a capacitor near the input terminal and output terminal between both terminals and GND. The capacitances should be determined experimentally because they depend on printed circuit board patterns. In particular, adequate investigation should be made to ensure there is no problem even in high or low temperatures. 16 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F (5) The molded plastic portion of this unit, measuring 5.5 mm (L) by 6.5 mm (W) by 2.3 mm (T), is more compact compared to its equivalent TO-220. The collector fin extends directly out of the main body and can be soldered directly to the ceramic circuit board for significant increase in collector power dissipation. To obtain high reliability on the heat sink design of a regulator IC, it is generally required to derate more than 20% of maximum junction temperature (Tj max). Further, full consideration should be given to the installation of the IC on a heat sink. Application Circuits (1) Voltage Boost Regulator (a) Voltage boost by use of zener diode (b) Voltage boost by use of resistor (c) Adjustable output regulator 17 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F (2) Current Boost Regulator (a) Current boost voltage regulator (b) Short-circuit protection (3) Negative Regulator (4) Positive and Negative Regulator (5) Current Regulator 18 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F Package Dimensions 19 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F Package Dimensions HSOP3-P-2.30A Unit: mm Weight: 0.36 g (typ.) 20 2007-02-19 TA78M05,06,08,09,10,12,15,18,20,24F RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 21 2007-02-19