RN5001 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) RN5001 Motor Drive Circuit Applications Power Amplifier Applications Power Switching Applications Unit: mm l With built-in bias resistors l Simplify circuit design l Reduce a quantity of parts and manufacturing process l Small flat package l PC = 1~2W (mounted on ceramic substrate) l Complementary to RN6001 Equivalent Circuit JEDEC JEITA TOSHIBA Weight: 0.05g (typ.) Maximum Ratings (Ta = 25°C) Characteristic Marking Symbol Rating Unit Collector-base voltage VCBO 30 V Collector-emitter voltage VCEO 30 V Emitter-base voltage VEBO 5 V Collector current IC 2 A Base current IB 0.4 A Collector power dissipation PC 500 mW Collector power dissipation PC * 1000 mW Tj 150 °C Tstg −55~150 °C Junction temperature Storage temperature range ― SC-62 2-5K1A * : Mounterd on ceramic substrate (250mm2 × 0.8t) 1 2001-10-29 RN5001 Electrical Characteristics (Ta = 25°C) Symbol Test Circuit Collector cut-offcurrent ICBO ― Emitter cut-off current IEBO V(BR)CES Characteristic Collector-emitter breakdown voltage DC current gain hFE (1) hFE (2) Min Typ. Max Unit VCB = 30V, IE = 0 ― ― 0.1 µA ― VEB = 5V, IC = 0 1.92 2.5 3.57 mA ― IC = 10mA 30 ― ― V VCE = 2V, IC = 0.5A 100 ― 320 VCE = 2V, IC = 2.0A 50 ― ― IC = 1A, IB = 0.05A ― ― 0.5 ― ― Collector-emitter saturation voltage VCE (sat) Base-emitter saturation voltage VBE (sat) ― IC = 1A, IB = 0.05A ― ― 1.2 V fT ― VCE = 2V, IC = 0.5A ― 120 ― MHz Cob ― VCB = 10V, IE = 0, f = 1 MHz ― 40 ― pF R ― 1.4 2.0 2.6 kΩ Transition frequency Collector output capacitance Resistor ― Test Condition ― 2 V 2001-10-29 RN5001 3 2001-10-29 RN5001 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 4 2001-10-29