RN1441∼RN1444 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) RN1441,RN1442,RN1443,RN1444 Muting And Switching Applications Unit in mm z High emitter-base voltage: VEBO = 25V (min) z High reverse hFE: reverse hFE = 150 (typ.) (VCE = −2V, IC = −4mA) z Low on resistance: RON = 1Ω (typ.) (IB = 5mA) z With built-in bias resistors z Simplify circuit design z Reduce a quantity of parts and manufacturing process Equivalent Circuit JEDEC EIAJ TOSHIBA Weight: 0.012g Absolute Maximum Ratings (Ta = 25°C) Characteristic Marking Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 20 V Emitter-base voltage VEBO 25 V Collector current IC 300 mA Collector power dissipation PC 200 mW Junction temperature Tj 150 °C Tstg −55~150 °C Storage temperature range TO-236MOD SC-59 2-3F1A Type No. HFE classification A B RN1441 KA KB RN1442 LA LB RN1443 NA NB RN1444 CA CB Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2007-11-01 RN1441∼RN1444 Electrical Characteristics (Ta = 25°C) Symbol Test Circuit Collector cut-off current ICBO ― Emitter cut-off current IEBO DC current gain Collector-emitter saturation voltage Characteristic Transition frequency Min Typ. Max Unit VCB = 50V, IE = 0 ― ― 0.1 μA ― VEB = 25V, IC = 0 ― ― 0.1 μA hFE (Note) ― VCE = 2V, IC = 4mA 200 ― 1200 VCE (sat) ― IC = 30mA, IB = 3mA ― ― 0.1 V ― VCE = 6V, IC = 4mA ― 30 ― MHz ― VCB = 10V, IE = 0, f = 1MHz ― 4.8 ― pF 3.9 5.6 7.3 7 10 13 15.4 22 28.6 1.54 2.2 2.86 fT Collector output capacitance Cob Test Condition RN1441 Input resistor RN1442 RN1443 R1 ― ― RN1444 Note : hFE classification A: 200∼700 kΩ B: 350∼1200 2 2007-11-01 RN1441∼RN1444 3 2007-11-01 RN1441∼RN1444 4 2007-11-01 RN1441∼RN1444 5 2007-11-01 RN1441∼RN1444 6 2007-11-01 RN1441∼RN1444 7 2007-11-01 RN1441∼RN1444 8 2007-11-01 RN1441∼RN1444 RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 9 2007-11-01