TOSHIBA RN1102MFVTPL3

RN1101MFV∼RN1106MFV
TOSHIBA Transistor
Silicon NPN Epitaxial Type (PCT Process)
RN1101MFV,RN1102MFV,RN1103MFV
RN1104MFV,RN1105MFV,RN1106MFV
Switching, Inverter Circuit, Interface Circuit and
Driver Circuit Applications
Unit: mm
z Ultra-small package, suited to very high density mounting
R2 (kΩ)
RN1101MFV
4.7
4.7
RN1102MFV
10
10
RN1103MFV
22
22
RN1104MFV
47
47
RN1105MFV
2.2
47
RN1106MFV
4.7
47
0.22 ± 0.05
RN1101MFV to 1106MFV
RN1101MFV to 1104MFV
2. EMITTER
3. COLLECTOR
VESM
JEDEC
―
JEITA
―
Symbol
Rating
Unit
VCBO
50
V
VCEO
50
V
VEBO
RN1105MFV, 1106MFV
RN1101MFV to 1106MFV
0.32 ± 0.05
0.4
1. BASE
2-1L1A
Weight: 1.5 mg (typ.)
Collector current
Junction temperature
0.13 ± 0.05
R1 (kΩ)
Characteristic
Collector power dissipation
3
0.5 ± 0.05
Type No.
Absolute Maximum Ratings (Ta = 25°C)
Emitter-base voltage
1
2
TOSHIBA
Collector-emitter voltage
0.80 ± 0.05
1
Equivalent Circuit and Bias Resistor Values
Collector-base voltage
1.2 ± 0.05
0.4
1.2 ± 0.05
z A wide range of resistor values is available for use in various circuits.
z Complementary to the RN2101MFV to RN2106MFV
0.8 ± 0.05
z Incorporating a bias resistor into the transistor reduces the number of parts,
so enabling the manufacture of ever more compact equipment and
lowering assembly cost.
10
5
V
IC
100
mA
PC(Note 1)
150
mW
Tj
150
°C
Tstg
−55 to 150
°C
Storage temperature range
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant
change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the
operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: Mounted on an FR4 board (25.4 mm × 25.4 mm × 1.6 mm)
0.5
Pad Dimension（Reference）
unit：mm
0.45
1.15
0.4
0.45
0.4
0.4
1
2010-03-07
RN1101MFV∼RN1106MFV
Electrical Characteristics (Ta = 25°C)
Characteristic
Collector cutoff current
Test
Circuit
Min
Typ.
Max
VCB = 50 V, IE = 0
―
―
100
VCE = 50 V, IB = 0
―
―
500
0.82
―
1.52
0.38
―
0.71
0.17
―
0.33
0.082
―
0.15
0.078
―
0.145
0.074
―
0.138
RN1101MFV
30
―
―
RN1102MFV
50
―
―
70
―
―
80
―
―
RN1105MFV
80
―
―
RN1106MFV
80
―
―
―
0.1
0.3
RN1101MFV
1.1
―
2.0
RN1102MFV
1.2
―
2.4
1.3
―
3.0
1.5
―
5.0
RN1105MFV
0.6
―
1.1
RN1106MFV
0.7
―
1.3
1.0
―
1.5
0.5
―
0.8
―
0.7
―
RN1101MFV
3.29
4.7
6.11
RN1102MFV
7
10
13
15.4
22
28.6
32.9
47
61.1
RN1105MFV
1.54
2.2
2.86
RN1106MFV
3.29
4.7
6.11
0.8
1.0
1.2
0.0376
0.0468
0.0562
0.08
0.1
0.12
RN1101MFV to
1106MFV
Symbol
ICBO
―
ICEO
Test Condition
RN1101MFV
RN1102MFV
Emitter cutoff current
RN1103MFV
RN1104MFV
VEB = 10 V, IC = 0
IEBO
―
RN1105MFV
VEB = 5 V, IC = 0
RN1106MFV
DC current gain
Collector-emitter
saturation voltage
Input voltage (ON)
Input voltage (OFF)
RN1103MFV
RN1104MFV
RN1101MFV to
1106MFV
RN1103MFV
RN1104MFV
RN1101MFV to
1104MFV
RN1105MFV,
1106MFV
Collector output
capacitance
Input resistor
RN1101MFV to
1106MFV
RN1103MFV
RN1104MFV
hFE
VCE (sat)
VI (ON)
VI (OFF)
Cob
R1
―
―
―
―
―
―
VCE = 5 V, IC = 10 mA
IC = 5 mA, IB = 0.5 mA
VCE = 0.2 V, IC = 5
mA
VCE = 5 V, IC = 0.1
mA
VCB = 10 V, IE = 0,
f = 1 MHz
―
RN1101MFV to
1104MFV
Resistor ratio
RN1105MFV
R1/R2
―
RN1106MFV
2
―
Unit
nA
mA
V
V
V
pF
kΩ
2010-03-07
RN1101MFV∼RN1106MFV
RN1101MFV
RN1102MFV
COLLECTOR CURRENT IC (mA)
COMMON EMITTER
VCE = 0.2V
INPUT VOLTAGE VI (ON)
(V)
RN1103MFV
RN1104MFV
RN1105MFV
RN1106MFV
3
2010-03-07
RN1101MFV∼RN1106MFV
RN1101MFV
RN1102MFV
RN1103MFV
RN1104MFV
RN1105MFV
RN1106MFV
4
2010-03-07
RN1101MFV∼RN1106MFV
RN1101MFV
RN1102MFV
RN1103MFV
RN1104MFV
RN1105MFV
RN1106MFV
5
2010-03-07
RN1101MFV∼RN1106MFV
RN1101MFV
RN1102MFV
RN1103MFV
RN1104MFV
RN1105MFV
RN1106MFV
6
2010-03-07
RN1101MFV∼RN1106MFV
Type Name
Marking
RN1101MFV
XA
RN1102MFV
XB
RN1103MFV
XC
RN1104MFV
XD
RN1105MFV
XE
RN1106MFV
XF
7
2010-03-07
RN1101MFV∼RN1106MFV
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
8
2010-03-07