TL(OE,YE,PYE,GE,FGE)33CP(F) TOSHIBA InGaAℓP LED TL(OE,YE,PYE,GE,FGE)33CP(F) Unit: mm Panel Circuit Indicators • Lead(Pb)-free products (lead: Sn-Ag-Cu) • 2.5 × 5 mm package • InGaAℓP technology • Colored Transparent lens • Line-up: 6 colors (orange, yellow, pure yellow, green and pure green) • Excellent low current light output • High intensity light emission • Excellent low current light output • Applications: dashboard displays, various indicator • Stopper lead type is also available Lineup Product Name Color TLOE33CP(F) orange TLYE33CP(F) yellow TLPYE33CP(F) yellow TLGE33CP(F) green TLFGE33CP(F) green Material JEDEC ⎯ JEITA ⎯ TOSHIBA 4-5AG2 Weight: 0.23 g(Typ.) InGaAℓP 1 2007-10-01 TL(OE,YE,PYE,GE,FGE)33CP(F) Absolute Maximum Ratings (Ta = 25°C) Forward Current IF (mA) Reverse Voltage VR (V) Power Dissipation PD (mW) TLOE33CP(F) 50 4 120 TLYE33CP(F) 50 4 120 TLPYE33CP(F) 50 4 120 TLGE33CP(F) 50 4 120 TLFGE33CP(F) 50 4 120 Product Name Operating Temperature Topr (°C) Storage Temperature Tstg (°C) −40~100 −40~120 Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Electrical and Optical Characteristics (Ta = 25°C) Product Name Typ. Emission Wavelength Luminous Intensity IV Forward Voltage VF Reverse Current IR λd λP Δλ IF Min Typ. IF Typ. Max IF Max VR TLOE33CP(F) 605 (612) 20 20 1530 4000 20 2.0 2.4 20 50 4 TLYE33CP(F) 587 (590) 17 20 1530 3500 20 2.0 2.4 20 50 4 TLPYE33CP(F) 580 (583) 14 20 476 1400 20 2.0 2.4 20 50 4 TLGE33CP(F) 571 (574) 17 20 272 800 20 2.0 2.4 20 50 4 TLFGE33CP(F) 565 (568) 15 20 153 400 20 2.0 2.4 20 50 4 mA μA V Unit nm mA mcd mA V Precautions • Please be careful of the following: Soldering temperature: 260°C max, soldering time: 3 s max (soldering portion of lead: up to 1.6 mm from the body of the device) • If the lead is formed, the lead should be formed up to 1.6 mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. • This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light. 2 2007-10-01 TL(OE,YE,PYE,GE,FGE)33CP(F) TLOE33CP(F) IF – V F IV – IF 100 IV (mcd) 30 Luminous intensity Forward current IF (mA) Ta = 25°C 50 10 5 3 1 1.6 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 2.3 (V) Forward voltage IV – Tc VF (V) Relative luminous intensity – Wavelength 3 1.0 IF = 20 mA Relative luminous intensity 1 0.5 0.3 0 20 Case temperature 40 Tc 60 0.6 0.4 0.2 0 540 80 560 (°C) 580 600 Wavelength 620 640 660 λ (nm) IF – Ta Radiation pattern 80 (mA) −20 IF 0.1 Allowable forward current Relative luminous intensity IV Ta = 25°C 0.8 60 40 20 0 0 20 40 60 Ambient temperature 3 80 Ta 100 120 (°C) 2007-10-01 TL(OE,YE,PYE,GE,FGE)33CP(F) TLYE33CP(F) IF – V F IV – IF 100 IV (mcd) 30 Luminous intensity Forward current IF (mA) Ta = 25°C 50 10 5 3 1 1.6 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 2.3 Forward voltage (V) IV – Tc VF (V) Relative luminous intensity – Wavelength Relative luminous intensity 5 3 1 0.5 0.3 0 20 Case temperature 40 Tc 60 80 (°C) Wavelength λ (nm) IF – Ta Radiation pattern 80 (mA) −20 IF 0.1 Allowable forward current Relative luminous intensity IV 10 60 40 20 0 0 20 40 60 Ambient temperature 4 80 Ta 100 120 (°C) 2007-10-01 TL(OE,YE,PYE,GE,FGE)33CP(F) TLPYE33CP(F) IV – IF IF – V F 100 10000 Ta = 25°C IV (mcd) 30 Luminous intensity Forward current IF (mA) Ta = 25°C 50 10 5 3 1 1.6 1000 100 10 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 2.3 1 3 5 10 30 Forward voltage (V) IV – Tc VF 50 100 (V) Relative luminous intensity – Wavelength 10 Relative luminous intensity 3 1 0.5 0.3 0 20 Case temperature 40 Tc 60 80 (°C) Wavelength Radiation pattern λ (nm) IF – Ta 80 (mA) −20 IF 0 Allowable forward current Relative luminous intensity IV 5 60 40 20 0 0 20 40 60 Ambient temperature 5 80 Ta 100 120 (°C) 2007-10-01 TL(OE,YE,PYE,GE,FGE)33CP(F) TLGE33CP(F) IF – V F IV – IF 10000 100 1000 Luminous intensity Forward current Ta = 25°C IV (mcd) 30 IF (mA) Ta = 25°C 50 10 5 3 100 10 1 1.6 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 2.3 1 3 (V) 5 10 Forward voltage 30 VF 50 100 (V) Relative luminous intensity – Wavelength IV – Tc IF Allowable forward current 1 0.5 0.3 0 20 Case temperature 40 Tc 60 80 (°C) Wavelength Radiation pattern λ (nm) IF – Ta 80 (mA) −20 IF 0.1 Allowable forward current Relative luminous intensity IV (mA) 3 60 40 20 0 0 20 40 60 Ambient temperature 6 80 Ta 100 120 (°C) 2007-10-01 TL(OE,YE,PYE,GE,FGE)33CP(F) TLFGE33CP(F) IF – V F IV – IF 5000 100 Ta = 25°C IV (mcd) 30 Luminous intensity Forward current IF (mA) Ta = 25°C 50 10 5 3 1 1.6 1.7 1.8 1.9 2.0 Forward voltage 2.1 VF 2.2 1000 100 10 1 2.3 10 (V) 100 Forward voltage IV – Tc VF (V) Relative luminous intensity – Wavelength Relative luminous intensity 1 0.5 0.3 0 20 Case temperature 40 Tc 60 80 (°C) Wavelength λ (nm) IF – Ta Radiation pattern 80 (mA) −20 IF 0.1 Allowable forward current Relative luminous intensity IV 3 60 40 20 0 0 20 40 60 Ambient temperature 7 80 Ta 100 120 (°C) 2007-10-01 TL(OE,YE,PYE,GE,FGE)33CP(F) RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 8 2007-10-01