SSM3K16FU TOSHIBA Field Effect Transistor Silicon N Channel MOS Type SSM3K16FU High Speed Switching Applications Analog Switching Applications • • Unit: mm Suitable for high-density mounting due to compact package Low on resistance: Ron = 3.0 Ω (max) (@VGS = 4 V) : Ron = 4.0 Ω (max) (@VGS = 2.5 V) : Ron = 15 Ω (max) (@VGS = 1.5 V) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Drain-Source voltage Gate-Source voltage DC Pulse Drain power dissipation (Ta = 25°C) Channel temperature Storage temperature range Drain current VDS VGSS ID IDP PD(Note 1) Tch Tstg Rating Unit 20 ±10 100 200 150 150 −55~150 V V mA mW °C °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Mounted on FR4 board (25.4 mm × 25.4 mm × 1.6 t, Cu Pad: 0.6 mm2 × 3) JEDEC ― JEITA SC-70 TOSHIBA 2-2E1E 0.6 mm 1.0 mm Marking Equivalent Circuit 3 3 DS 1 2 1 2 Handling Precaution When handling individual devices (which are not yet mounting on a circuit board), be sure that the environment is protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects that come into direct contact with devices should be made of anti-static materials. 1 2007-11-01 SSM3K16FU Electrical Characteristics (Ta = 25°C) Characteristics Symbol Gate leakage current Drain-Source breakdown voltage Drain cut-off current Gate threshold voltage Forward transfer admittance Drain-Source ON resistance Test Condition Min Typ. Max Unit IGSS VGS = ±10 V, VDS = 0 ⎯ ⎯ ±1 μA V (BR) DSS ID = 0.1 mA, VGS = 0 20 ⎯ ⎯ V IDSS VDS = 20 V, VGS = 0 ⎯ ⎯ 1 μA Vth VDS = 3 V, ID = 0.1 mA 0.6 ⎯ 1.1 V ⏐Yfs⏐ VDS = 3 V, ID = 10 mA 40 ⎯ ⎯ mS ID = 10 mA, VGS = 4 V ⎯ 1.5 3.0 ID = 10 mA, VGS = 2.5 V ⎯ 2.2 4.0 ID = 1 mA, VGS = 1.5 V ⎯ 5.2 15 RDS (ON) Ω Input capacitance Ciss VDS = 3 V, VGS = 0, f = 1 MHz ⎯ 9.3 ⎯ pF Reverse transfer capacitance Crss VDS = 3 V, VGS = 0, f = 1 MHz ⎯ 4.5 ⎯ pF Output capacitance Coss VDS = 3 V, VGS = 0, f = 1 MHz ⎯ 9.8 ⎯ pF VDD = 3 V, ID = 10 mA, VGS = 0~2.5 V ⎯ 70 ⎯ ⎯ 125 ⎯ Switching time Turn-on time ton Turn-off time toff ns Switching Time Test Circuit (b) VIN (a) Test circuit 2.5 V OUT 2.5 V 90% 50 Ω IN 0 10 μs 0V RL VDD (c) VOUT VDD = 3 V Duty < = 1% VIN: tr, tf < 5 ns (Zout = 50 Ω) Common Source Ta = 25°C 10% VDD 10% 90% VDS (ON) tr ton tf toff Precaution Vth can be expressed as voltage between gate and source when low operating current value is ID = 100 μA for this product. For normal switching operation, VGS (on) requires higher voltage than Vth and VGS (off) requires lower voltage than Vth. (Relationship can be established as follows: VGS (off) < Vth < VGS (on) ) Please take this into consideration for using the device. 2 2007-11-01 SSM3K16FU ID – VDS ID – VGS 250 1000 Common source 2.5 Common source Ta = 25°C VDS = 3 V 10 (mA) 2.3 2.1 ID 1.9 150 Drain current Drain current ID (mA) 200 4 3 1.7 100 1.5 50 100 Ta = 100°C 10 25°C −25°C 1 0.1 VGS = 1.3 V 0 0 0.5 1 1.5 Drain-Source voltage 0.01 0 2 1 VDS (V) Gate-Source voltage RDS (ON) – ID 12 2 VGS (V) RDS (ON) – VGS 6 Common source Common source Ta = 25°C ID = 10 mA 5 Drain-Source on resistance RDS (ON) (Ω) Drain-Source on resistance RDS (ON) (Ω) 10 8 VGS = 1.5 V 6 4 2.5 V 2 4 3 Ta = 100°C 2 25°C 1 −25°C 4V 0 1 10 100 0 0 1000 2 4 RDS (ON) – Ta 2 Vth (V) VGS = 1.5 V, ID = 1 mA Gate threshold voltage Drain-Source on resistance RDS (ON) (Ω) Common source 4 2.5 V, 10 mA 0 −25 4 V, 10 mA 0 25 50 75 8 10 VGS (V) Vth – Ta 8 2 6 Gate-Source voltage Drain current ID (mA) 6 3 100 125 1.6 1.2 0.8 0.4 0 −25 150 Ambient temperature Ta (°C) Common source ID = 0.1 mA VDS = 3 V 0 25 50 75 100 125 150 Ambient temperature Ta (°C) 3 2007-11-01 SSM3K16FU ⎪Yfs⎪ – ID IDR – VDS 250 300 Common source VDS = 3 V Ta = 25°C 100 Drain reverse current IDR (mA) Forward transfer admittance ⎪Yfs⎪ (mS) 500 50 30 10 5 3 1 1 10 100 200 150 D IDR G S 100 50 0 0 1000 Common source VGS = 0 V Ta = 25°C −0.2 Drain current ID (mA) −0.4 −0.6 Drain-Source voltage −1 VDS −1.2 −1.4 (V) t – ID C – VDS 100 5000 Common source VDD = 3 V VGS = 0~2.5 V Ta = 25°C 3000 50 30 (pF) Switching time t (ns) toff 10 Capacitance C −0.8 Ciss Coss 5 3 Crss Common source 1 VGS = 0 V f = 1 MHz 0.5 Ta = 25°C 0.3 0.1 1000 500 100 ton 50 30 0.3 0.5 1 3 5 Drain-Source voltage 10 30 50 100 10 0.1 VDS (V) tf 300 tr 1 10 100 Drain current ID (mA) PD – Ta Drain power dissipation PD (mW) 250 Mounted on FR4 board. (25.4 mm × 25.4 mm × 1.6 t 2 Cu Pad: 0.6 mm × 3) 200 150 100 50 0 0 40 80 120 160 Ambient temperature Ta (°C) 4 2007-11-01 SSM3K16FU RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2007-11-01