Series 110…105 / 114…117 / 150…106 Dual-in-line sockets and headers Open frame / surface mount 59 Specially designed for reflow soldering including vapor phase. Insertion characteristics: receptacle 4-finger standard New: Pin connectors with selective plated precision screw machined pin, plating code Z1. Connecting side 1: gold plated soldering/PCB side 2: tin plated Platings 91 99 90 Z1 Sleeve 5 µm Sn Pb 5 µm Sn Pb Clip 0.25 µm Au 5 µm Sn Pb No. of poles Ordering information Replace xx with required plating code. Other platings on request Pin 5 µm Sn Pb 1: 0.25 µm Au 2: 5 µm Sn Pb Series 110-xx-xxx-41-105 and 150-xx-xxx-00-106 with gull wing terminals for maximum strength and easy in-circuit test Series 114-xx-xxx-41-117 with floating contacts compensate effects of unevenly dispensed solder paste Order Codes Plating: see ordering information Insulator dimensions Fig. 1 Fig. 2 Fig. 3 See page 50 A B C 10 110-xx-210-41-105 114-xx-210-41-117 150-xx-210-00-106 Fig. 1 12.6 5.08 7.6 4 6 8 10 14 16 18 20 22 24 28 110-xx-304-41-105 110-xx-306-41-105 110-xx-308-41-105 110-xx-310-41-105 110-xx-314-41-105 110-xx-316-41-105 110-xx-318-41-105 110-xx-320-41-105 110-xx-322-41-105 110-xx-324-41-105 110-xx-328-41-105 114-xx-304-41-117 114-xx-306-41-117 114-xx-308-41-117 114-xx-310-41-117 114-xx-314-41-117 114-xx-316-41-117 114-xx-318-41-117 114-xx-320-41-117 114-xx-322-41-117 114-xx-324-41-117 114-xx-328-41-117 150-xx-304-00-106 150-xx-306-00-106 150-xx-308-00-106 150-xx-310-00-106 150-xx-314-00-106 150-xx-316-00-106 150-xx-318-00-106 150-xx-320-00-106 150-xx-322-00-106 150-xx-324-00-106 150-xx-328-00-106 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 5.0 7.6 10.1 12.6 17.7 20.3 22.8 25.3 27.8 30.4 35.5 7.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62 10.1 10.1 10.1 10.1 10.1 10.1 10.1 10.1 10.1 10.18 10.1 22 24 28 32 110-xx-422-41-105 110-xx-424-41-105 110-xx-428-41-105 110-xx-432-41-105 114-xx-422-41-117 114-xx-424-41-117 114-xx-428-41-117 114-xx-432-41-117 150-xx-422-00-106 150-xx-424-00-106 150-xx-428-00-106 150-xx-432-00-106 Fig. 13 Fig. 14 Fig. 15 Fig. 16 27.8 30.4 35.5 40.6 10.16 10.16 10.16 10.16 12.6 12.6 12.6 12.6 24 28 32 36 40 42 48 110-xx-624-41-105 110-xx-628-41-105 110-xx-632-41-105 110-xx-636-41-105 110-xx-640-41-105 110-xx-642-41-105 110-xx-648-41-105 114-xx-624-41-117 114-xx-628-41-117 114-xx-632-41-117 114-xx-636-41-117 114-xx-640-41-117 114-xx-642-41-117 114-xx-648-41-117 150-xx-624-00-106 150-xx-628-00-106 150-xx-632-00-106 150-xx-636-00-106 150-xx-640-00-106 150-xx-642-00-106 150-xx-648-00-106 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 30.4 35.5 40.6 45.7 50.6 53.2 60.9 15.24 15.24 15.24 15.24 15.24 15.24 15.24 17.7 17.7 17.7 17.7 17.7 17.7 17.7 For PCB Layout see page 60: Fig. 4 Series 110 / 150, Fig. 5 Series 114