Series 890 / 892 PCB connectors 2.54 mm Single row / double row Solder tail 35 Series 890/892 square pin headers are cost efficient thanks to selective gold plating on pins made of copper alloy They come with various pin lengths to suit many different applications When used with series 999 female jumpers, these connectors may serve as a practical, simple means for coding purposes For corresponding receptacles see pages 22 to 29 Platings Sleeve Clip Pin 0.25 µm Au/Sn Pb* 0.75 µm Au/Sn Pb* Sn Pb 19 39 90 * selective Ordering information Replace xxx with required number of poles, e.g. 892-39-xxx-20-902 for a double row version with 12 pins per row becomes: 892-39-024-20-902 Availability: single row: 1 to 36 contacts, standard 36 contacts double row: 4 to 72 contacts, standard 72 contacts Order Codes Plating 19 Plating 39 B Dimensions Plating 90 Solder side B ± 0.2 Connector side A ± 0.2 Min. length of gold plating G Single row 890-19-xxx-20-902 890-19-xxx-20-000 890-19-xxx-20-901 890-19-xxx-20-903 890-19-xxx-20-904 890-39-xxx-20-902 890-39-xxx-20-000 890-39-xxx-20-901 890-39-xxx-20-903 890-39-xxx-20-904 890-90-xxx-20-902 890-90-xxx-20-000 890-90-xxx-20-901 890-90-xxx-20-903 890-90-xxx-20-904 2.5 2.9 3.2 3.4 5.1 5.7 7.0 6.7 5.8 5.7 4.5 5.8 5.5 4.6 4.5 Double row 892-19-xxx-20-902 892-19-xxx-20-000 892-19-xxx-20-901 892-19-xxx-20-903 892-39-xxx-20-902 892-39-xxx-20-000 892-39-xxx-20-901 892-39-xxx-20-903 892-90-xxx-20-902 892-90-xxx-20-000 892-90-xxx-20-901 892-90-xxx-20-903 2.5 2.9 3.2 3.4 5.7 7.0 6.7 5.8 4.5 5.8 5.5 4.6 For other pin and solder tail lenghts, triple row headers, double body board spacer (Sandwich) headers and SMT or press-fit terminations please consult. B Products not available from stock. Please consult PRECI-DIP.