16cm COLOUR TFT-LCD MODULE (6.3 TYPE) LTM06C310 (p-Si TFT) LIQUID CRYSTAL DISPLAY DIVISION PRODUCT INFORMATION FEATURES (1) (2) (3) TENTATIVE A high-resolution of 202 pixels per inch - equivalent to printed materials. XGA resolution – expanding applications in such areas as electronic books and personal digital-picture viewers. 6.3-inch display – simillar in size to a typical photograph or a paperback book. MECHANICAL SPECIFICATIONS Item Dimensional Outline (Typ.) Number of Pixels Active Area Pixel Pitch Weight (approximately) Backlight Specifications 151.9(W) x 115.8(H) x 7.9max(D) mm 1024(W) x 768(H) pixels 129.024(W) x 96.768(H) mm 0.126(W) x 0.126(H) 130g Single CCFL, Sidelight type ABSOLUTE MAXIMUM RATINGS Item Supply Voltage Min. -0.3 0 -0.3 0 -20 10 (VDD) (VFL) FL Driving Frequency (fFL) Input Signal Voltage (VIN) Operating Temperature Storage Temperature Storage Humidity Max. 4.0 2.0 100 VDD+0.3 50 60 90 Unit V kV(rms) kHz V °C °C %(RH) ELECTRICAL SPECIFICATION Item Supply Voltage (VDD) (VFL) FL Start Voltage (Ta=0°C) Receiver Input Voltage Differential Input High Threshold(VTH)*1 Differential Input Low Threshold(VTL)*1 Current Consumption *2 (IDD) *3 (IFL) *2 *3 Power Consumption Min. 3.0 (390) (1000) 0 --VOS-0.1 --(2.0) --- Typ. 3.3 (440) --------(270) (2.8) (2.1) Max. 3.6 (490) (1400) 2.4 VOS+0.1 ----(6.0) --- Unit V V(rms) V(rms) V V V MA mA(rms) W Remarks IFL=2.8 mA(rms) VOS:Offset Mode Voltage VOS=1.2V @70cd/m2 *1 : Refer to DF90CF364 Specification by National Semiconductor Corporation. This LCD module conforms to LVDS standard (TIA/EIA-644) *2 : 8 color bars pattern *3 : Excepting the efficiency FL inverter *4 : not use Hsync nor Vsync. Only ENAB control. OPTICAL SPECIFICATION (Ta=25°C) Item Contrast Ratio (CR) Response Time Luminance (L) (tON) (tOFF) Min. 100 ----(50) --- Typ. 250 ----(70) (150) Max. --50 50 ----- Unit --ms ms cd/m2 cd/m2 Remarks IFL=2.8mA(rms) IFL=6mA(rms) *The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by Toshiba or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Toshiba or others. *The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba before proceeding with the design of equipment incorporating this product. (1/10) 1999-12-06 (Ver.0.1) LTM06C310 BLOCK DIAGRAM I/F PCB LVDS Liquid Crystal Panel Y-driver Panel Controller CN1 DC/DC Converter 1024 x 768 pixels X-driver Gray scale Manipulation Voltage Generation Circuit D/A Converter Circuit FPC CN2 Backlight 1024 pixels 1, 1 1, 2 1, Y 2, 1 X2n-1, 1 X2n, 1 X2n-1, Y X2n, Y 1, 768 1024, 1 768 pixels 1024,768 (3/10) 1999-12-06 (Ver.0.1) LTM06C310 CONNECTOR PIN ASSIGNMENT FOR INTERFACE CN1 INPUT SIGNAL Connector : SL00-20L2 / KEL CORP. Mating Connector : SL20-20S / KEL CORP. Terminal No. Symbol Function 1 VDD Power Supply : +3.3V 2 VDD Power Supply : +3.3V 3 VDD Power Supply : +3.3V 4 VDD Power Supply : +3.3V 5 GND 6 GND 7 GND 8 CK+ Sampling Clock (Positive : + ) 9 CKSampling Clock (Negative : - ) 10 GND 11 IN2+ Transmission Data of Pixels 2 (Positive : + ) 12 IN2Transmission Data of Pixels 2 (Negative : - ) 13 GND 14 IN1+ Transmission Data of Pixels 1 (Positive : + ) 15 IN1Transmission Data of Pixels 1 (Negative : - ) 16 GND 17 IN0+ Transmission Data of Pixels 0 (Positive : + ) 18 IN0Transmission Data of Pixels 0 (Negative : - ) 19 GND 20 GND CN2 CCFL POWER SOURCE Connector : BHSR-02VS-1 / JAPAN SOLDERLESS TERMINAL MFG CO.,LTD. Mating Connector : SM02B-BHSS-1 / JAPAN SOLDERLESS TERMINAL MFG CO.,LTD. Terminal No. 1 2 Symbol VFLH VFLL Function CCFL Power Supply ( high voltage) CCFL Power Supply (low voltage) (6/10) 1999-12-06 (Ver.0.1) LTM06C310 RECOMMENDED TRANSMITTER (DS90CF363) TO LTM06C310 INTERFACE ASSIGNMENT Case1: 6bit Transmitter Input Terminal No. Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN5 TIN6 TIN7 TIN8 TIN9 TIN10 TIN11 TIN12 TIN13 TIN14 TIN15 TIN16 TIN17 TIN18 TIN19 TIN20 CLK IN DS90CF363 44 45 47 48 1 3 4 6 7 9 10 12 13 15 16 18 19 20 22 23 25 26 IN 0 TIN6 IN 2 Output Signal Symbol LTM06C310 Interface (CN1) Terminal Symbol TOUT0TOUT0+ No.12 No.11 IN0IN0+ TOUT1TOUT1+ No.10 No.9 IN1IN1+ TOUT2TOUT2+ No.8 No.7 IN2IN2+ TCLK OUTTCLK OUT+ No.6 No.5 CLK INCLK IN+ TIN5 TIN4 TIN3 TIN2 TIN1 TIN0 R5 R4 R3 R2 R1 R0 TIN13 TIN12 TIN11 TIN10 TIN9 TIN8 TIN7 B1 B0 G5 G4 G3 G2 G1 TIN20 TIN19 TIN18 TIN17 TIN16 TIN15 TIN14 ENAB NC NC B5 B3 B2 G0 IN 1 DS90CF363 Input Signal (Graphics controller output signal) Symbol Function R0 Red Pixels Display Data (LSB) R1 Red Pixels Display Data R2 Red Pixels Display Data R3 Red Pixels Display Data R4 Red Pixels Display Data R5 Red Pixels Display Data (MSB) G0 Green Pixels Display Data (LSB) G1 Green Pixels Display Data G2 Green Pixels Display Data G3 Green Pixels Display Data G4 Green Pixels Display Data G5 Green Pixels Display Data (MSB) B0 Blue Pixels Display Data (LSB) B1 Blue Pixels Display Data B2 Blue Pixels Display Data B3 Blue Pixels Display Data B4 Blue Pixels Display Data B5 Blue Pixels Display Data (MSB) NC Non Connection (open) NC Non Connection (open) ENAB Compound Synchronization Signal NCLK Data Sampling Clock (7/10) B4 1999-12-06 (Ver.0.1) LTM06C310 RECOMMENDED TRANSMITTER (DS90CF383) TO LTM06C310 INTERFACE ASSIGNMENT Case2: 8bit Transmitter Input Terminal No. Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN6 TIN7 TIN8 TIN9 TIN12 TIN13 TIN14 TIN15 TIN18 TIN19 TIN20 TIN21 TIN22 TIN24 TIN25 TIN26 TIN27 TIN5 TIN10 TIN11 TIN16 TIN17 TIN23 CLK IN DS90CF383 51 52 54 55 56 3 4 6 7 11 12 14 15 19 20 22 23 24 27 28 30 50 2 8 10 16 18 25 31 IN 0 DS90CF383 Input Signal (Graphics controller output signal) Symbol Function R0 Red Pixels Display Data (LSB) R1 Red Pixels Display Data R2 Red Pixels Display Data R3 Red Pixels Display Data R4 Red Pixels Display Data R5 Red Pixels Display Data (MSB) G0 Green Pixels Display Data(LSB) G1 Green Pixels Display Data G2 Green Pixels Display Data G3 Green Pixels Display Data G4 Green Pixels Display Data G5 Green Pixels Display Data(MSB) B0 Blue Pixels Display Data (LSB) B1 Blue Pixels Display Data B2 Blue Pixels Display Data B3 Blue Pixels Display Data B4 Blue Pixels Display Data B5 Blue Pixels Display Data (MSB) NC Non Connection (open) NC Non Connection (open) ENAB Compound Synchronization Signal NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NCLK Data Sampling Clock TIN7 IN 2 IN 3 LTM06C310 Interface (CN1) Terminal Symbol TOUT0TOUT0+ No.12 No.11 IN0IN0+ TOUT1TOUT1+ No.10 No.9 IN1IN1+ TOUT2TOUT2+ No.8 No.7 IN2IN2+ No.6 No.5 CLK INCLK IN+ TOUT3TOUT3+ TCLK OUTTCLK OUT+ TIN6 TIN4 TIN3 TIN2 TIN1 TIN0 R5 R4 R3 R2 R1 R0 TIN18 TIN15 TIN14 TIN13 TIN12 TIN9 TIN8 B1 B0 G5 G4 G3 G2 G1 TIN26 TIN25 TIN24 TIN22 TIN21 TIN20 TIN19 ENAB NC B4 B3 B2 TIN23 TIN17 G0 IN 1 Output Signal Symbol NC NC NC TIN16 NC B5 TIN11 NC (8/10) TIN10 NC TIN5 NC TIN27 NC 1999-12-06 (Ver.0.1) LTM06C310 256k (k=1024) COLORS COMBINATION TABLE Basic Color Gray Scale of Red Display Black Blue Green Light Blue Red Purple Yellow White Black Dark ↑ ↓ Light Red Black Gray Scale of Green Dark ↑ ↓ Light Green Black Gray Scale of Blue Dark ↑ ↓ Light Blue Black Gray Scale of White & Black Dark ↑ ↓ Light White R5 R4 R3 R2 R1 R0 L L L L L L L L L L L L L L L L L L L L L L L L H H H H H H H H H H H H H H H H H H H H H H H H L L L L L L L L L L L H L L L L H L : : H H H L L L H H H L L L H H H L L L H H H L L L L H H L L L H L H L L L G5 G4 G3 G2 G1 G0 L L L L L L L L L L L L H H H H H H H H H H H H L L L L L L L L L L L L H H H H H H H H H H H H L L L L L L L L L L L L L L L L L L : : L L L L L L L L L L L L L L L L L L : : L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L H H H L L L H H H L L L H H H L L L H H H H H H L L L L H L L L L L L L L L L L L L L L L L L L H H H L L L L H H L L L H L H L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L H L L L L H L L L L L L L L L L L L L L L L L L L L L L L L H L L L L H L H H H L L L H H H L L L H H H L L L : : H H H L H H H L H H H H H H H H H H L L L L L L L L L L L L L L L L L L L L L L L H L L L L H L L61 L62 Green L63 L 0 L 1 L 2 L3… L60 H H H L L L L H H L L H H L H L H L L61 L62 Blue L63 L 0 L 1 L 2 L3… L60 H H H L H H H L H L61 L62 White L63 : : L L L L L L : : H H H (9/10) L H H H L H H H H H H H H H H Gray Scale Level L 0 L 1 L 2 L3… L60 L L L L L L : : : : : : H H H L L L L L H : : : : L L L L L L L L L L L L B5 B4 B3 B2 B1 B0 L L L L L L H H H H H H L L L L L L H H H H H H L L L L L L H H H H H H L L L L L L H H H H H H L L L L L L L L L L L L L L L L L L : : Red L61 L62 L63 L 0 L 1 L 2 L3… L60 1999-12-06 (Ver.0.1) LTM06C310 ! FOR SAFETY LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions. In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed in Engineering Information No.EE-N001,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA LCD MODULES". Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical information. 1) SPECIAL PURPOSES A) Toshiba's Standard LCD Modules have not been customized for operation in extreme environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic. B) Since Toshiba's Standard LCD Modules have not been designed for operation in extreme environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which exceed Toshiba's published specification limits. C) In addition, since Toshiba Standard LCD Modules have not been designed for use in applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft navigation control systems (such as, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical device or patient life-support systems. 2) DISASSEMBLING OR MODIFICATION DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. Toshiba doses not warrant the module, if customer disassembled or modified it. 3) BREAKAGE OF LCD PANEL DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if LCD panel is broken and liquid crystal material spills out. If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately. If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 4) GLASS OF LCD PANEL BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken. 5) ELECTRIC SHOCK DISCONNECT POWER SUPPLY before handling LCD module. DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on. 6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may be damaged. Employ protection circuit for power supply, whenever the specification or TD specifies it. Suitable protection circuit should be applied for each system design. 7) DISPOSAL When dispose LCD module, obey to the applicable environmental regulations. (10/10) 1999-12-06 (Ver.0.1)