TOSHIBA 2SB1067_06

2SB1067
TOSHIBA Transistor
Silicon PNP Epitaxial Type (Darlington Power Transistor)
2SB1067
Industrial Applications
Micro-Moter Drive, Hammer Drive Applications
Switching Applications
Power Amplifier Applications
•
High DC current gain: hFE = 2000 (min) (VCE = −2 V, IC = −1 A)
•
Low saturation voltage: VCE (sat) = −1.5 V (max)
Unit: mm
(IC = −1 A, IB = −1 mA)
Absolute Maximum Ratings (Tc = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
−80
V
Collector-emitter voltage
VCEO
−80
V
Emitter-base voltage
VEBO
−8
V
Collector current
IC
−2
A
Base current
IB
−0.5
A
Ta = 25°C
Collector power
dissipation
PC
Tc = 25°C
Junction temperature
Storage temperature range
1.5
10
W
JEDEC
―
JEITA
―
Tj
150
°C
TOSHIBA
2-8H1A
Tstg
−55 to 150
°C
Weight: 0.82 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to
decrease in the reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Equivalent Circuit
COLLECTOR
BASE
≈ 4 kΩ
≈ 800 Ω
EMITTER
1
2006-11-21
2SB1067
Electrical Characteristics (Tc = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = −80 V, IE = 0
―
―
−10
μA
Emitter cut-off current
IEBO
VEB = −8 V, IC = 0
―
―
−4
mA
V (BR) CEO
IC = −10 mA, IB = 0
−80
―
―
V
Collector-emitte breakdown voltage
DC current gain
hFE
VCE = −2 V, IC = −1 A
2000
―
―
Collector-emitter saturation voltage
VCE (sat)
IC = −1 A, IB = −1 mA
―
―
−1.5
V
Base-emitter saturation voltage
VBE (sat)
IC = −1 A, IB = −1 mA
―
―
−2.0
V
VCE = −2 V, IC = −0.5 A
―
50
―
MHz
VCB = −10 V, IE = 0, f = 1 MHz
―
30
―
pF
―
0.4
―
―
2.0
―
―
0.4
―
Transition frequency
fT
Collector output capacitance
Cob
ton
Storage time
tstg
Input
IB2
20 μs
Output
30 Ω
Switching time
IB1
IB2
Turn-on time
IB1
μs
VCC = −30 V
Fall time
tf
−IB1 = IB2 = 1 mA, duty cycle ≤ 1%
Marking
Lot No.
B1067
Part No. (or abbreviation code)
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2
2006-11-21
2SB1067
IC – VCE
−1000
−600
5000
Tc = 25°C
−1.6
VCE = −2 V
3000
−400
DC current gain hFE
(A)
Common emitter
Common emitter
−500
−800
Collector current IC
hFE – IC
10000
−300
−0.8
IB = −200 μA
Tc = 100°C
1000
25
−55
500
300
100
50
−2
−4
−6
Collector-emitter saturation voltage
VCE (sat) (V)
Collector-emitter voltage
−8
Common emitter
IC/IB = 1000
Tc = −55°C
−1
25
100
−0.5
−0.3
−0.03
VCE (V)
VCE (sat) – IC
−3
30
−0.01
−1
IC/IB = 1000
−3
Tc = −55°C
25
100
−1
−0.3
−1
(W)
Collector power dissipation PC
(A)
Collector current IC
(A)
PC – Ta
−55
−0.8
25
Base-emitter voltage
−3
Collector current IC
−1.6
−1.6
(A)
(A)
VCE = −2 V
−0.8
−3
Common emitter
(1) Tc = Ta Infinite heat sink
(2) No heat sink
Common emitter
0
0
−1
VBE (sat) – IC
IC – VBE
Tc = 100°C
−0.3
−5
−3
Collector current IC
−0.1
Collector current IC
Base-emitter saturation voltage
VBE (sat) (V)
0
0
−2.4
12
(1)
8
4
(2)
0
0
−3.2
40
80
120
160
200
240
Ambient temperature Ta (°C)
VBE (V)
3
2006-11-21
2SB1067
Safe Operating Area
−5
Collector current IC
(A)
−3
IC max (pulsed)*
IC max (continuous)
100 μs*
1 ms*
−1
10 ms*
−0.5
−0.3
DC operation
Tc = 25°C
−0.1
*: Single nonrepetitive pulse
Tc = 25°C
−0.05 Curves must be derated
linearly with increase in
temperature.
−0.02
−1
−3
−10
VCEO max
−30
Collector-emitter voltage
−100
VCE (V)
4
2006-11-21
2SB1067
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5
2006-11-21