OPTOWAY SPS-9130V-1TG

Optoway
1
SPS-9130V-1TG
***********************************************************************************************************************************************************************
SPS-9130V-1TG
(RoHS Compliant)
1310 nm / 3 Gb/s Medium Power Single Optical SM Transmitter
**********************************************************************************************************************************************************************
DESCRIPTION
FEATURES
l SMPTE 297-2006 Compatible
l Speed from 50 Mbps to 3Gbps with up to 30 km
Single-mode Fiber
l Distance up to 30 km for 3G-SDI
l Support Video Pathological Patterns for SD-SDI,
HD-SDI and 3G-SDI
l Single Transmitter with Simplex LC
l Based on Industry Standard SFP
l TTL Laser Disable Input
l Single +3.3 V Power Supply
l RoHS-6 Compliant
l 0 to 70oC Operation
l Hot Pluggable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
The SPS-9130V-1TG is a single channel optical single
mode transmitter module designed to transmit optical serial
digital signals as defined in SMPTE 297-2006. It supports
from 50 Mbps to 3 Gbps and is specifically designed for
transmitted the SMPTE 259M, SMPTE 344M, SMPTE
292M and SMPTE 424M SDI pathological patterns. It is
with the SFP 20-pin connector to allow hot plug capability.
It is with 1310 nm DFB laser transmitters. The transmitter
can transmit signal from 50 Mbps to 3 Gbps with up to 30
km
of single-mode
fiber
when
using
the
SPS-9110V-1RG/2RG as the receiver. A maximum
distance of 30 km is achievable with 3Gbps pathological
signals.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l SMPTE 297-2006 Compliant Electrical-to-Optical
Interfaces
l High-density Video Routers
ORDER INFORMATION
P/No.
SPS-9130V-1TG
Type
1-TX
TX
λ
Power
(nm)
(dBm)
50 to 3000 1310 DFB
0 to -5
RX
Bit Rate
(Mb/s)
λ
(nm)
Package
Temp
(oC)
RoHS
Compliant
LC SFP
0 to 70
Yes
Package
Temp
(oC)
RoHS
Compliant
LC SFP
LC SFP
LC SFPI
LC SFP
0 to 70
0 to 70
0 to 70
0 to 70
Yes
Yes
Yes
Yes
Sen.
(dBm)
RELATED PRODUCTS
P/No.
SPS-9110V-1RG
SPS-9130V-2TG
SPS-9110V-2RG
SPS-9130V-1T1RG
Type
1-RX
2-TX
2-RX
1-TX+1-RX
Bit Rate
(Mb/s)
TX
λ
(nm)
50 to 3000
50 to 3000 1310 DFB
50 to 3000
50 to 3000 1310 DFB
Power
(dBm)
RX
λ
Sen.
(nm)
(dBm)
1260/1620 0 to -20
0 to -5
0 to -5
1260/1620 0 to -20
1260/1620 0 to -20
LINK DISTANCE
Transmitter
Receiver
SDI
Bit Rate
Max. Link Distance (km)
SPS-9130V-2TG or
SPS-9130V-1TG or
SPS-9130V-1T1RG
SPS-9110V-2RG or
SPS-9110V-1RG or
SPS-9130V-1T1RG
3G-SDI
HD-SDI
SD-SDI
2.97Gbps
1.485Gbps
270Mbos
30
30
30
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2009 V1.0
Optoway
SPS-9130V-1TG
2
***********************************************************************************************************************************************************************
ABSOLUTE MAXIMUM RATINGS
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
ESD Tolerance on all pins
Relative Humidity
Symbol
Tstg
Tc
Vcc
Min
-40
-20
0
---
5
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Case Temperature
Tc
Baud Rate
Power Supply Current
Icc
Min
3.13
0
50
Max
85
85
4
1
95
Units
o
C
o
C
V
KV HBM
% RH
Typ
3.3
Max
3.47
70
3000
180
130
Notes
non-condensing
Units / Notes
V
o
C
Mb/s
mA
Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Extinction Ratio
Relative Intensity Noise
Optical Rise Time / Fall Time
Electrical
Differential Input Voltage
Disable Input Voltage -- Low
Disable Input Voltage -- High
SCL, SDA
1.
2.
Symbol
Min
Typ
Max
Units
Notes
Po
λ
∆λ
SMSR
ER
RIN
-5
1260
--30
5
-2
1310
0
1360
1
1
-120
135
270
800
1.5
dBm
nm
nm
dB
dB
dB/Hz
ps
ps
ps
ns
1200
0.8
Vcc+0.3
Vcc+0.3
0.5
mVp-p
V
V
V
V
tr / tf
V IH - VIL
VTDIS,L
VTDIS,H
V OH
V OL
200
0
2.0
2.5
0
7.5
-20 dB width
2, SMPTE 424M
2, SMPTE 292M
2, SMPTE 344M
2, SMPTE 259M
AC coupled input
TX Output Enabled
TX Ouput Disabled
Output power is power coupled into a 9/125 µm single mode fiber.
20% to 80%, unfiltered.
MODULE DEFINITION
Module Definition
PIN 5
PIN 6
Interpretation by Host
4
SCL
SDA
Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector
(NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM
protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2009 V1.0
Optoway
SPS-9130V-1TG
3
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Name
Vee
NC
NC
Vee
SCL
SDA
Vee
NC
NC
NC
Vee
NC
NC
Vee
NC
Vcc TX
Vee
TX+
TXTX_DIS
Function
Signal Ground
No Connection
No Connection
Signal Ground
Serial I2C Clock
Serial I2C Data
Signal Ground
No Connection
No Connection
No Connection
Signal Ground
No Connection
No Connection
Signal Ground
No Connection
Power Supply
Signal Ground
Positive Transmitter Data In
Negative Transmitter Data In
Transmitter Disable
Notes
+3.3V±5%, Internal connected
AC coupled differential lines with 100 ohm
differential termination inside the module
Internal 4.7 kΩ pull-up. The bias current and
modulation current are turned off if TX1_DIS =
HIGH.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2009 V1.0
Optoway
SPS-9130V-1TG
4
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
1
VCC 3.3V
2
3
10K
10K
I2C CLK
I2C DATA
4
5
6
7
8
9
10
Vee
TX_DIS
NC
TX -
NC
TX +
Vee
Vee
SCL
Vcc_TX
SDA
NC
Vee
NC
NC
NC
NC
NC
NC
Vee
20
TX_DIS
TD -
19
100Ω Differential
18
Re-Clocker
TD +
17
16
15
14
100nF
10uF
100nF
10uF
VCC 3.3V
1uH
13
12
11
1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs
are internally biased and may not need external bias resistor.
PACKAGE DIAGRAM (Units in mm)
Note: Since the SPS-9110VW-1TG is single channel device, the receptacle for channel 2 is not used.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2009 V1.0
Optoway
SPS-9130V-1TG
5
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
1.0
Subject
Initial datasheet
Release Date
2009/1/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
1/1/2009 V1.0