OPTOWAY SPB-9110LVW

Optoway
SPB-9110LVW-T3R5G
1
***********************************************************************************************************************************************************************
SPB-9110LVW-T3R5G
(RoHS Compliant)
1310 nm TX / 1550 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video Digital Diagnostic SFP Transceiver
**********************************************************************************************************************************************************************
DESCRIPTION
FEATURES
l SMPTE 297-2006 Compatible
l 1-Fiber Bi-Directional SFP Optical Transceiver
l Speed from 50 Mbps to 3Gbps with up to 30 km
Single-mode Fiber
l Distance up to 10 km for 3G-SDI
l Support Video Pathological Patterns for SD-SDI,
HD-SDI and 3G-SDI
l 1310 nm Transmitter
l 1550 nm Receiver
l SFF-8472 Digital Diagnostic Function
l Simplex LC Connector
l Single +3.3 V Power Supply
l RoHS-6 Compliant
l 0 to 70oC Operation
l Hot Pluggable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
The SPB-9110LVW-T3R5G is a 1-fibre BIDI single mode
transceiver module designed to transmit/receive optical
serial digital signals as defined in SMPTE 297-2006. It
supports from 50 Mbps to 3 Gbps and is specifically
designed for transmitted the SMPTE 259M, SMPTE 344M,
SMPTE 292M and SMPTE 424M SDI pathological
patterns. It is with the SFP 20-pin connector to allow hot
plug capability. Digital diagnostic functions are available
via an I2C. It is with 1310 nm laser transmitters. The
receiver section uses an integrated 1550 nm detector
preamplifier mounted in an optical header and a limiting
post-amplifier IC. The transmitter can transmit signal from
50 Mbps to 3 Gbps with up to 30 km of single-mode fiber.
A maximum distance of 10 km is achievable with 3Gbps
pathological signals.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l SMPTE 297-2006 Compliant Electrical-to-Optical
Interfaces
l High-density Video Routers
ORDER INFORMATION
TX
λ
(nm)
SPB-9110LVW-T3R5G 1-TX+1-RX 50 to 3000
1310
SPB-9110LVW-T5R3G 1-TX+1-RX 50 to 3000 1550 DFB
P/No.
Type
Bit Rate
(Mb/s)
RX
Power
(dBm)
0 to -5
-3 to -8
λ
(nm)
1550
1310
Package
Temp
RoHS
(oC) Compliant
Sen.
(dBm)
0 to -20 LC SFP with DMI 0 to 70
Yes
0 to -20 LC SFP with DMI 0 to 70
Yes
LINK DISTANCE
SDI
Bit Rate
Max. Link Distance (km)
3G-SDI
HD-SDI
SD-SDI
2.97Gbps
1.485Gbps
270Mbos
10
21
30
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
3/1/2009 V1.0
Optoway
SPB-9110LVW-T3R5G
2
***********************************************************************************************************************************************************************
ABSOLUTE MAXIMUM RATINGS
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Power Supply Voltage
ESD Tolerance on all pins
Relative Humidity
Symbol
Tstg
Tc
Vcc
Min
-40
0
0
---
5
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Case Temperature
Tc
Baud Rate
Power Supply Current
Icc
Min
3.13
0
50
Max
85
70
4
1
95
Units
o
C
o
C
V
KV HBM
% RH
Typ
3.3
Max
3.47
70
3000
300
200
Notes
non-condensing
Units / Notes
V
o
C
Mb/s
mA
Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Relative Intensity Noise
Optical Rise Time / Fall Time
Electrical
Differential Input Voltage
Disable Input Voltage -- Low
Disable Input Voltage -- High
SCL, SDA
1.
2.
Symbol
Min
Typ
Max
Units
Notes
Po
λ
∆λ
ER
RIN
-5
1260
--5
-2
1310
1.5
7.5
0
1360
3
1
-120
135
270
800
1.5
dBm
nm
nm
dB
dB/Hz
ps
ps
ps
ns
1200
0.8
Vcc+0.3
Vcc+0.3
0.5
mVp-p
V
V
V
V
tr / tf
V IH - VIL
VTDIS,L
VTDIS,H
V OH
V OL
200
0
2.0
2.5
0
RMS (σ)
2, SMPTE 424M
2, SMPTE 292M
2, SMPTE 344M
2, SMPTE 259M
AC coupled input
TX Output Enabled
TX Ouput Disabled
Output power is power coupled into a 9/125 µm single mode fiber.
20% to 80%, unfiltered.
Receiver Specifications (0oC < Tc < 70oC, 3.13V < Vcc < 3.47V)
Parameter
Optical
Wavelength of Operation
Sensitivity for SMPTE 424M
2.97 Gb/s
Sensitivity for SMPTE 292M
1.485 Gb/s
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Optical Return Loss
Electrical
CML Output (Differential)
Symbol
Sen
Sen
Pa
Pd
Min
Typ
Max
Units
Notes
1480
0
0
0
0
---29
1
-----
1580
-18
-20
-20
-21
-23
--6
nm
dBm
dBm
dBm
dBm
dBm
dBm
dB
dB
3
Pathological
PRBS 223-1, BER=1E-12
Pathological
PRBS 223-1, BER=1E-12
Transition: low to high
Transition: high to low
850
mVp-p
-------27
550
660
AC coupled output
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
3/1/2009 V1.0
Optoway
SPB-9110LVW-T3R5G
3
***********************************************************************************************************************************************************************
Optical Rise Time / Fall Time
tr / tf
Output LOS Voltage -- Low
Output LOS Voltage -- High
SCL, SDA
V OL
V OH
V OH
V OL
0
2.5
2.5
0
135
270
800
1.5
0.5
Vcc+0.3
Vcc+0.3
0.5
ps
ps
ps
ns
V
V
V
V
4, SMPTE 424M
4, SMPTE 292M
4, SMPTE 344M
4, SMPTE 259M
IOL=-1.6mA, 1 TTL unit load
IOH=40µA, 1 TTL unit load
3. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm.
4. 20% to 80%, unfiltered.
MODULE DEFINITION
Module Definition
PIN 5
PIN 6
Interpretation by Host
4
SCL
SDA
Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector
(NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM
protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
3/1/2009 V1.0
Optoway
SPB-9110LVW-T3R5G
4
***********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
2
Name
Vee
TX_Fault
3
4
5
6
7
8
NC
Vee
SCL
SDA
Vee
RX_LOS
9
10
11
12
13
14
15
16
17
18
19
20
NC
NC
Vee
RXRX+
Vee
Vcc RX
Vcc TX
Vee
TX+
TXTX_DIS
Function
Signal Ground
Transmitter Fault Indicator (Active high,
open-drain)
No Connection
Signal Ground
Serial I2C Clock
Serial I2C Data
Signal Ground
Receiver Loss of Signal Indicator (Active
high, open-drain)
No Connection
No Connection
Signal Ground
Negative Differential Output
Positive Differential Output
Signal Ground
Power Supply
Power Supply
Signal Ground
Positive Transmitter Data In
Negative Transmitter Data In
Transmitter Disable
Notes
+3.3V±5%, Internal connected
AC coupled differential lines with 100 ohm
differential termination inside the module
Internal 4.7 kΩ pull-up. The bias current and
modulation current are turned off if TX1_DIS =
HIGH.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
3/1/2009 V1.0
Optoway
SPB-9110LVW-T3R5G
5
***********************************************************************************************************************************************************************
RECOMMENDED CIRCUIT SCHEMATIC
VCC 3.3V
1
4.7K
TX_FAULT
2
3
4
VCC 3.3V
5
4.7K
4.7K
6
7
I2C CLK
8
I2C DATA
9
RX_LOS
10
Vee
TX_FAULT
TX_DIS
TX -
NC
TX +
Vee
Vee
SCL
Vcc_TX
SDA
Vcc_RX
Vee
Vee
RX_LOS
RX +
NC
RX -
NC
Vee
20
TX_DIS
TD -
19
100Ω Differential
18
Re-Clocker
TD +
17
16
100nF
10uF
VCC 3.3V
1uH
15
1uH
14
13
100nF
10uF 100nF
10uF
12
11
RD +
4.7K
100Ω Differential
VCC 3.3V
Re-Clocker
RD -
1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs
are internally biased and may not need external bias resistor.
PACKAGE DIAGRAM (Units in mm)
Note: Specifications subject to change without notice.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
3/1/2009 V1.0
Optoway
SPB-9110LVW-T3R5G
6
***********************************************************************************************************************************************************************
REVISION HISTORY
Version
1.0
Subject
Initial datasheet
Release Date
2009/3/1
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
3/1/2009 V1.0