TOSHIBA 1SS344_07

1SS344
TOSHIBA Diode
Silicon Epitaxial Schottky Planar Type
1SS344
Ultra High Speed Switching Application
z Low forward voltage
Unit: mm
: VF (3) = 0.50V (typ.)
z Fast reverse recovery time : trr = 20ns (typ.)
z High average forward current : IO = 0.5A (max)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
VRM
25
V
Reverse voltage
VR
20
V
Maximum (peak) forward current
IFM
1500
mA
Maximum (peak) reverse voltage
Average forward current
IO
500
mA
IFSM
5
A
Power dissipation
P
200
mW
Junction temperature
Tj
125
°C
Storage temperature
Tstg
−55~125
°C
JEDEC
Operating Temperature
Topr
−40~100
°C
EIAJ
Surge current (10ms)
TD-236MOD
SC-59
1-3G1B
TOSHIBA
Note: Using continuously under heavy loads (e.g. the application of high
Weight:
0.012g
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test
Circuit
VF (1)
―
VF (2)
Min
Typ.
Max
IF = 10mA
―
0.30
―
―
IF = 100mA
―
0.38
―
VF (3)
―
IF = 500mA
―
0.50
0.55
IR (1)
―
VR = 10V
―
―
20
IR (2)
―
VR = 20V
―
―
100
Total capacitance
CT
―
VR = 0, f = 1MHz
―
120
―
pF
Reverse recovery time
trr
―
IF = 50mA, (Fig.1)
―
20
―
ns
Forward voltage
Reverse current
Test Condition
1
Unit
V
μA
2007-11-01
1SS344
Fig.1 Reverse Recovery Time (trr) Test Circuit Marking
2
2007-11-01
1SS344
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
3
2007-11-01