VISHAY LCD

LCD-320D240A
Vishay
320 x 240 Dots Color LCD
FEATURES
• Type: Color
• Display format: 320 x 240 dots (RGB)
• Built-in controller: None
• Duty cycle: 1/240
• Built-in white backlight (CCFL)
• Color STN LCD type
• 8-bit data bus
• + 3 V to + 5 V power supply
• Compliant to RoHS directive 2002/95/EC
MECHANICAL DATA
ITEM
ABSOLUTE MAXIMUM RATINGS
STANDARD VALUE
STANDARD VALUE
UNIT
ITEM
Module Dimension
154.6 x 114.8
Viewing Area
118.18 x 89.38
Dot Size
SYMBOL
Power Supply VDD to VSS
0.09 x 0.33
UNIT
MIN.
TYP.
MAX.
2.7
3.0
3.3
4.7
5.0
5.3
0.8 VDD
-
VDD
V
mm
Dot Pitch
Input Voltage
0.12 x 0.36
Mounting Hole
148.6 x 106.8
Character Size
N/a
VI
Note
• VSS = 0 V, VDD = 5.0 V
ELECTRICAL CHARACTERISTICS
ITEM
Input Voltage
Supply Current
Recommended LC Driving
Voltage for Normal Temperature
Version Module
Power Consumption
SYMBOL
CONDITION
VDD
STANDARD VALUE
MIN.
TYP.
MAX.
L level
0.8 VDD
-
VDD
VIO
H level
VSS
-
0.2 VDD
IDD
VDD = 5 V
-
-
-
0 °C
-
-
-
25 °C
-
26.2
-
50 °C
-
-
-
VDD = 5 V, VEE = 26.2 V
-
2.0
-
VEE to VSS
-
UNIT
V
mA
V
mA
OPTIONS
PROCESS COLOR
TN
STN
Gray
STN
Yellow
STN
Blue
BACKLIGHT
FSTN
B&W
STN
Color
None
x
LED
EL
CCFL
x
For detailed information, please see the “Product Numbering System” document.
Document Number: 37290
Revision: 24-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
1
LCD-320D240A
320 x 240 Dots Color LCD
Vishay
INTERFACE PIN FUNCTION
PIN NO.
SYMBOL
FUNCTION
1
FRM
Scan start-up signal
2
LOAD
Data latch
3
CP
Data shift
4
DSIP
Display enable signal
Power supply for logic
5
VDD
6
VSS
Ground
7
VEE
Power supply for LCD
8
DB7
Display data bus
9
DB6
Display data bus
10
DB5
Display data bus
11
DB4
Display data bus
12
DB3
Display data bus
13
DB2
Display data bus
14
DB1
Display data bus
15
DB0
Display data bus
DIMENSIONS in millimeters
154.6 ± 0.5
148.6 ± 0.3
3
3
120.2 ± 0.3 (Bezel Opening)
118.18 (Viewing Area)
8.5 ± 0.3
0.12
0.09
0.33
0.36
2 to 4.0
Bezel
Opening
Center
R
0.
5
1.3
x
4
2 x 8.0 ± 0.3
2
81.0 ± 0.3
2x4
2 x 3.2 ± 0.2
0.
53.4 ± 0.3
86.38 (Active Area)
89.38 (Viewing Area)
115.18 (Active Area)
±
3
83.5 ± 0.5
91.4 ± 0.3 (Bezel Opening)
106.8 ± 0.3
114.8 ± 0.5
2
1.5
3.
CCFL Connector
BHR-03VS-1(JST)
1
50 ± 10
2.5 ± 0.3
xØ
2x4
2
2
Bezel Opening Area
Active Area
1 > Tolerance X-Direction A = 2.51 ± 0.6
2 > Tolerance Y-Direction B = 2.51 ± 0.6
3 > Obliquity of Display Area (C to D) ± 0.6
A
C
www.vishay.com
2
B
D
For technical questions, contact: [email protected]
Document Number: 37290
Revision: 24-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1