TC7MZ4051,4052,4053FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7MZ4051FK,TC7MZ4052FK,TC7MZ4053FK TC7MZ4051FK 8-Channel Analog Multiplexer/Demultiplexer TC7MZ4052FK Dual 4-Channel Analog Multiplexer/Demultiplexer TC7MZ4053FK Triple 2-Channel Analog Multiplexer/Demultiplexer The TC7MZ4051/4052/4053FK are high-speed, low-voltage drive analog multiplexer/demultiplexers using silicon gate CMOS technology. In 3 V and 5 V systems these can achieve high-speed operation with the low power dissipation that is a feature of CMOS. The TC7MZ4051/4052/4053FK offer analog/digital signal selection as well as mixed signals. The 4051 has an 8-channel configuration, the 4052 has an 4-channel × 2 configuration, and Weight: 0.02 g (typ.) the 4053 has a 2-channel × 3 configuration. The switches for each channel are turned ON by the control pin digital signals. Although the control signal logical amplitude (VCC − GND) is small, the device can perform large-amplitude (VCC − VEE) signal switching. For example, if VCC = 3 V, GND = 0 V, and VEE = −3 V, signals between −3 V and +3 V can be switched from the logical circuit using a single 3 V power supply. All input pins are equipped with a newly developed input protection circuit that avoids the need for a diode on the plus side (forward side from the input to the VCC). As a result, for example, 5 V signals can be permitted on the inputs even when the power supply voltage to the circuits is off. As a result of this input power protection, the TC7MZ4051/4052/4053FK can be used in a variety of applications, including in the system which has two power supplies, and in battery backup circuits. Features · Low ON resistance: Ron = 22 Ω (typ.) (VCC − VEE = 3 V) · High speed: tpd = 3 ns (typ.) (VCC = 3.0 V) Ron = 15 Ω (typ.) (VCC − VEE = 6 V) · Low power dissipation: ICC = 4 µA (max) (Ta = 25°C) · Input level: VIL = 0.8 V (max) (VCC = 3 V) · Power down protection is provided on all control inputs · Pin and function compatible with 74HC4051/4052/4053 VIH = 2.0 V (min) (VCC = 3 V) 1 2001-10-23 TC7MZ4051,4052,4053FK Pin Assignment (top view) TC7MZ4051FK TC7MZ4052FK 4 1 16 VCC 0Y 1 16 VCC 6 2 15 2 2Y 2 15 2X COM 3 14 1 Y-COM 3 14 1X 7 4 13 0 3Y 4 13 X-COM 5 5 12 3 1Y 5 12 0X INH 6 11 A INH 6 11 3X VEE 7 10 B VEE 7 10 A 9 GND 8 C 9 GND 8 B TC7MZ4053FK 1Y 1 16 VCC 0Y 2 15 Y-COM 1Z 3 14 X-COM Z-COM 4 13 1X 0Z 5 12 0X INH 6 11 A VEE 7 10 B 9 GND 8 C Truth Table Control Inputs “ON” Channel Inhibit C* B A MZ4051FK MZ4052FK MZ4053FK L L L L 0 0X, 0Y 0X, 0Y, 0Z L L L H 1 1X, 1Y 1X, 0Y, 0Z L L H L 2 2X, 2Y 0X, 1Y, 0Z L L H H 3 3X, 3Y 1X, 1Y, 0Z L H L L 4 ¾ 0X, 0Y, 1Z L H L H 5 ¾ 1X, 0Y, 1Z L H H L 6 ¾ 0X, 1Y, 1Z L H H H 7 ¾ 1X, 1Y, 1Z H X X X None None None X: Don't care, *: Except MZ4052FK 2 2001-10-23 TC7MZ4051,4052,4053FK System Diagram TC7MZ4051FK COM C OUT IN 0 1 Logic Level Converter A B 2 3 4 5 C 6 C OUT INH IN 7 TC7MZ4052FK X-COM C OUT IN 0X 1X Logic Level Converter A B 2X 3X 0Y 1Y 2Y C INH OUT IN 3Y Y-COM TC7MZ4053FK Y-COM X-COM A C IN Logic Level Converter OUT B C 1X 0Y 1Y 0Z C OUT INH 3 0X IN 1Z Z-COM 2001-10-23 TC7MZ4051,4052,4053FK Absolute Maximum Ratings Characteristics Symbol Rating VCC -0.5~7.0 VCC~VEE -0.5~7.0 Control input voltage VIN -0.5~7.0 Switch I/O voltage VI/O VEE - 0.5~VCC + 0.5 V Input diode current IIK -20 mA IIOK ±20 mA IT ±25 mA DC VCC or ground current ICC ±50 mA Power dissipation PD 180 mW Storage temperature Tstg -65~150 °C Symbol Rating Unit VCC 2~6 VEE -4~0 VCC~VEE 2~6 VIN 0~6.0 Switch I/O voltage VI/O VEE~VCC V Operating temperature Topr -40~85 °C Input rise and fall time dt/dv Power supply voltage I/O diode current Switch through current Unit V V Recommended Operating Conditions Characteristics Power supply voltage Input voltage 0~100 (VCC = 3.3 ± 0.3 V) 0~20 (VCC = 5 ± 0.5 V) 4 V V ns/V 2001-10-23 TC7MZ4051,4052,4053FK Electrical Characteristics DC Electrical Characteristics Characteristics Symbol Ta = 25°C Test Condition VEE (V) VCC (V) High-level VIH Min Typ. Max Min Max 2.0 1.5 ¾ ¾ 1.5 ¾ 3.0 2.0 ¾ ¾ 2.0 ¾ 4.5 3.15 ¾ ¾ 3.15 ¾ 6.0 4.2 ¾ ¾ 4.2 ¾ 2.0 ¾ ¾ 0.5 ¾ 0.5 3.0 ¾ ¾ 0.8 ¾ 0.8 4.5 ¾ ¾ 1.35 ¾ 1.35 6.0 ¾ ¾ 1.8 ¾ 1.8 GND 2.0 ¾ 200 ¾ ¾ ¾ GND 3.0 ¾ 45 86 ¾ 108 GND 4.5 ¾ 24 37 ¾ 46 -3.0 3.0 ¾ 17 26 ¾ 33 GND 2.0 ¾ 28 73 ¾ 84 GND 3.0 ¾ 22 38 ¾ 44 GND 4.5 ¾ 17 27 ¾ 31 -3.0 3.0 ¾ 15 24 ¾ 28 35 ¾ Input voltage Low-level VIL ¾ VIN = VIL or VIH VI/O = VCC to VEE II/O = 2 mA ON resistance RON VIN = VIL or VIH VI/O = VCC or VEE II/O = 2 mA Difference of ON resistance between switches Input/Output leakage current (switch OFF) GND 2.0 ¾ 10 25 ¾ GND 3.0 ¾ 5 15 ¾ 20 GND 4.5 ¾ 5 13 ¾ 18 -3.0 3.0 ¾ 5 10 ¾ 15 GND 3.0 ¾ ¾ ±0.25 ¾ ±2.5 -3.0 3.0 ¾ ¾ ±0.5 ¾ ±5.0 VOS = VCC or GND GND 3.0 ¾ ¾ ±0.25 ¾ ±2.5 VIN = VIL or VIH -3.0 3.0 ¾ ¾ ±0.5 ¾ ±5.0 GND 6.0 ¾ ¾ ±0.1 ¾ ±0.1 GND 3.0 ¾ ¾ 4.0 ¾ 40.0 -3.0 3.0 ¾ ¾ 8.0 ¾ 80.0 VIN = VIL or VIH DRON VI/O = VCC to VEE II/O = 2 mA VOS = VCC or GND IOFF Ta = -40~85°C VIS = GND to VCC VIN = VIL or VIH Input/Output leakage current (switch ON, output open) IIN Control input current IIN VIN = VCC or GND Quiescent supply current ICC VIN = VCC or GND 5 Unit V W W mA mA mA mA 2001-10-23 TC7MZ4051,4052,4053FK AC Electrical Characteristics (CL = 50 pF, Input: tr = tf = 3 ns, GND = 0 V) Characteristics Symbol Ta = 25°C Test Condition VEE (V) VCC (V) Phase difference between input and output Output enable time Output disable time Control input capacitance fI/O tpZL tpZH tpLZ tpHZ Cin Min Typ. Max Min Max GND 2.0 ¾ 3.2 6.0 ¾ 6.9 GND 3.0 ¾ 1.8 3.0 ¾ 3.5 GND 4.5 ¾ 1.3 1.8 ¾ 2.1 -3.0 3.0 ¾ 1.1 1.3 ¾ 1.5 GND 2.0 ¾ 9.0 17 ¾ 20 GND 3.0 ¾ 5.7 9.0 ¾ 11 GND 4.5 ¾ 4.5 6.0 ¾ 7.0 -3.0 3.0 ¾ 5.8 8.0 ¾ 10 GND 2.0 ¾ 13.5 21 ¾ 25 GND 3.0 ¾ 11.3 15 ¾ 18 GND 4.5 ¾ 10.3 12 ¾ 14 -3.0 3.0 ¾ 10.9 13 ¾ 15 ¾ ¾ ¾ 5 10 ¾ 10 11 25 9 20 7 15 15 6 13 13 6 13 4053 6 13 13 4051 3 6 6 3 6 3 6 All types Figure 1 Figure 1 All types (Note 1) (Note 1) (Note 2) 4051 COMMON terminal capacitance Figure 2 CIS 4052 (Note 2) -3.0 3.0 ¾ 4053 4051 SWITCH terminal capacitance Feedthrough capacitance Figure 2 COS CIOS 4052 4052 (Note 2) Figure 2 (Note 2) -3.0 -3.0 3.0 3.0 ¾ ¾ 4053 4051 Power dissipation capacitance CPD Ta = -40~85°C 4052 Unit ns ns ns pF 25 ¾ ¾ ¾ 20 13 6 pF pF pF 6 14 Figure 2 (Note 3) GND 4053 6.0 ¾ 24 ¾ ¾ ¾ pF 18 Note1: RL = 1 kW Note2: Cin, CIS, COS and CIOS are guaranteed by the design. Note3: CPD is defined as the value of the internal equivalent capacitance of IC which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD･VCC･fIN + ICC 6 2001-10-23 TC7MZ4051,4052,4053FK *Analog Switch Characteristics (GND = 0 V, Ta = 25°C) Characteristics Symbol Test Condition RL = 10 kW, CL = 50 pF, fIN = 1 kHz Sine Wave Distortion (T.H.D) Typ. VEE (V) VCC (V) VIN = 2.0 Vp-p 0 3.0 0.100 VIN = 4.0 Vp-p 0 4.5 0.030 VIN = 6.0 Vp-p -0.3 3.0 0.020 4051 fmax (switch ON) 4052 Adjust fIN voltage to obtain 0dBm 4053 at VOS. 4051 Increase f frequency until dB 0 meter reads -3dB. 4052 0 RL = 50 W, CL = 10 pF, fIN = 1 MHz, sine wave 4053 200 4051 150 Figure 3 4052 3.0 150 -3.0 4.5 3.0 3.0 -45 0 4.5 -45 -3.0 3.0 -45 0 3.0 -60 0 4.5 -60 -3.0 3.0 -60 RL = 600 W, CL = 50 pF, fIN = 1 MHz, square wave 0 3.0 90 (tr = tf = 6 ns) 0 4.5 150 -3.0 3.0 120 Adjust VIN to obtain 0dBm at input. 0 3.0 -45 RL = 600 W, CL = 50 pF, fIN = 1 MHz, sine wave 0 4.5 -45 -3.0 3.0 -45 Figure 4 RL = 50 W, CL = 10 pF, fIN = 1 MHz, sine wave (control input to signal output) Crosstalk (between any switches) Figure 5 Figure 6 MHz 180 0 RL = 600 W, CL = 50 pF, fIN = 1 MHz, sine wave Crosstalk 180 200 Adjust input for 0dBm. Feed through attenuation (switch OFF) 180 200 4053 VIN is centered at (VCC - VEE)/2. % 150 IN Frequency response Unit dB mV dB *: These characteristics are determined by design of devices. Switch pin Common pin 7 2001-10-23 TC7MZ4051,4052,4053FK AC Test Circuit 3 ns VCC 3 ns VCC 90% VC GND 1 kW VO/I (S1 = VCC, S2 = GND) S2 90% 50% tpZH tpHZ VO/I (S1 = GND, S2 = VCC) 10% tpZL Figure 1 VOH VOL VOH 50% VOL tpLZ tpLZ, tpHZ, tpZL, tpZH CIOS VCC VCC O/I I/O VEE Figure 2 GND (Common pin) CIS C (Switch pin) CIOS, CIS, COS VCC VCC C 0.1 mF I/O O/I VEE Figure 3 GND 10 pF VIN 50 9 Frequency Response (switch on) VCC VCC C 0.1 mF I/O O/I VIN VEE Figure 4 GND CL VEE GND RL S1 O/I COS I/O RL C 10% VCC 50 pF from P.G 50% Feedthrough 8 2001-10-23 TC7MZ4051,4052,4053FK VCC VCC GND VCC 600 9 I/O Figure 5 VEE O/I GND 50 pF C 600 9 from P.G Cross Talk (control input to output signal) VCC VCC C C 600 9 I/O Figure 6 50 pF VCC 50 pF O/I 600 9 I/O 0.1 mF 600 W 600 9 VIN O/I VEE GND Cross Talk (between any two switches) 9 2001-10-23 TC7MZ4051,4052,4053FK Package Dimensions Weight: 0.02 g (typ.) 10 2001-10-23 TC7MZ4051,4052,4053FK RESTRICTIONS ON PRODUCT USE 000707EBA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 11 2001-10-23