SPICE MODELS: S2A S2B S2D S2G S2J S2K S2M S2AA S2BA S2DA S2GA S2JA S2KA S2MA S2A/A - S2M/A 1.5A SURFACE MOUNT GLASS PASSIVATED RECTIFIER Features · · · · · Glass Passivated Die Construction Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 50A Peak Lead Free Finish/RoHS Compliant (Note 3) A Mechanical Data · · · · · · · · C Case: SMA/SMB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 D Moisture Sensitivity: Level 1 per J-STD-020C J Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 e3 Polarity: Cathode Band or Cathode Notch SMB Min Max Min Max A 2.29 2.92 3.30 3.94 B 4.00 4.60 4.06 4.57 C 1.27 1.63 1.96 2.21 D 0.15 0.31 0.15 0.31 E 4.80 5.59 5.00 5.59 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 J 2.01 2.62 2.00 2.62 G E H SMA Dim B Ideally Suited for Automated Assembly All Dimensions in mm Marking: Type Number, See Page 2 A Suffix Designates SMA Package No Suffix Designates SMB Package Ordering Information: See Page 2 Approximate Weight: SMA 0.064 grams SMB 0.093 grams Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 100°C Symbol S2 A/AA S2 B/BA S2 D/DA S2 G/GA S2 J/JA S2 K/KA S2 M/MA Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V I(AV) 1.5 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 50 A Forward Voltage @ IF = 1.5A VFM 1.15 V @TA = 25°C @TA = 125°C IRM 5.0 125 µA CT 20 pF RqJT 20 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current at Rated DC Blocking Voltage Typical Total Capacitance (Note 1) Typical Thermal Resistance, Junction to Terminal (Note 2) Operating and Storage Temperature Range Notes: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance Junction to Terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS16004 Rev. 11 - 2 1 of 3 www.diodes.com S2A/A - S2M/A ã Diodes Incorporated Ordering Information (Note 4) Device* Packaging Shipping S2xA-13-F S2x-13-F SMA SMB 5000/Tape & Reel 3000/Tape & Reel * x = Device type, e.g. S2AA-13-F (SMA package); S2A-13-F (SMB package). Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW XXX(X) XXX = Product type marking code, ex: S2A (SMB package) XXXX = Product type marking code, ex: S2AA (SMA package) = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 IF, INSTANTANEOUS FORWARD CURRENT (A) IAV, AVERAGE FORWARD CURRENT (A) 1.5 1.2 0.9 0.6 0.3 Resistive or inductive load 0 20 40 60 80 100 120 140 10 1.0 0.1 Tj = 25°C 0.01 160 0.5 0.9 1.1 1.3 1.5 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TT, TERMINAL TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) 0.7 60 Single Half-Sine-Wave 1000 50 100 40 Tj = 125°C 10 30 1.0 20 Tj = 25°C 0.1 10 0.01 0 1 10 0 100 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve DS16004 Rev. 11 - 2 2 of 3 www.diodes.com S2A/A - S2M/A IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS16004 Rev. 11 - 2 3 of 3 www.diodes.com S2A/A - S2M/A