A Product Line of Diodes Incorporated FMMT560 PNP SILICON PLANAR HIGH VOLTAGE TRANSISTOR Features Mechanical Data • • • • • • Excellent hFE Characteristics up to IC = 50mA Low Saturation Voltages Lead, Halogen and Antimony Free, RoHS Compliant (Note 1) "Green" Device (Note 2) • • • • • • Case: SOT-23 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Matte Tin Finish annealed over Copper leadframe (Lead Free Plating). Solderable per MIL-STD-202, Method 208 Terminal Connections: See Diagram Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.008 grams (approximate) C C B B E Top View Maximum Ratings E Pin Configuration @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value -500 -500 -5 -150 -500 Unit V V V mA mA Symbol PD TJ, TSTG Value 500 -55 to +150 Unit mW °C Thermal Characteristics Characteristic Power Dissipation Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 3) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS (Note 3) Symbol Min Typ Max Unit V(BR)CBO V(BR)CEO V(BR)EBO ICBO; ICES IEBO -500 -500 -5 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ -100 -100 V V V nA nA hFE 100 80 ⎯ ⎯ ⎯ 15 300 300 ⎯ ⎯ Collector-Emitter Saturation Voltage VCE(SAT) ⎯ ⎯ Base-Emitter Turn-On Voltage Base-Emitter Saturation Voltage SMALL SIGNAL CHARACTERISTICS Output Capacitance VBE(ON) VBE(SAT) ⎯ ⎯ ⎯ ⎯ -0.2 -0.5 -0.9 -0.9 Cobo ⎯ ⎯ 8 pF Current Gain-Bandwidth Product fT 60 ⎯ ⎯ MHz SWITCHING CHARACTERISTICS Turn-On Time Turn-Off Time ton toff ⎯ ⎯ 110 1.5 ⎯ ⎯ ns μs DC Current Gain Notes: V V V Test Condition IC = -100μA IC = -10mA IE = 100μA VCB = -500V, VCE = -500V VEB = -5V IC = -1mA, VCE = -10V IC = -50mA, VCE = -10V IC = -100mA, VCE = -10V IC = -20mA, IB = -2mA IC = -50mA, IB = -10mA IC = -50mA, VCE = -10V IC = -50mA, IB = -10mA VCB = -20V, f = 1MHz VCE = -20V, IC = -10mA, f = 50MHz VCE = -100V, IC = -50mA, IB1 = -5mA, IB2 = 10mA 1. No purposefully added lead. Halogen and Antimony Free. 2. Diodes Inc.'s "Green" Policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Measured under pulsed conditions. Pulse width = 300µs. Duty cycle ≤2% FMMT560 Document Revision: 3 1 of 4 www.diodes.com May 2009 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT560 FMMT560 Document Revision: 3 2 of 4 www.diodes.com May 2009 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT560 Ordering Information (Note 4) Part Number FMMT560TA Notes: Case SOT-23 Packaging 3000/Tape & Reel 4. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information 560 = Product Type Marking Code 560 Package Outline Dimensions A B C H K M K1 D J F L G SOT-23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.903 1.10 1.00 K1 0.400 L 0.45 0.61 0.55 M 0.085 0.18 0.11 0° 8° α All Dimensions in mm Suggested Pad Layout Y Z C X FMMT560 Document Revision: 3 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 C 2.0 E 1.35 E 3 of 4 www.diodes.com May 2009 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT560 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com FMMT560 Document Revision: 3 4 of 4 www.diodes.com May 2009 © Diodes Incorporated