A Product Line of Diodes Incorporated FMMTL718 20V PNP SILICON LOW SATURATION TRANSISTOR IN SOT23 Features and Benefits Mechanical Data • • • • • • • • • • • • • • • BVCEO > -20V IC = -1A Continuous Collector Current ICM = -2A Peak Pulse Current Low Saturation Voltage VCE(sat) < -320mV @ -1A hFE characterised up to -1.5A for high current gain hold-up 500mW power dissipation Complementary part number FMMTL618 Lead Free, RoHS Compliant (Note 1) Halogen and Antimony Free "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability • Case: SOT-23 UL Flammability Rating 94V-0 Case material: molded Plastic. Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Matte Tin Finish annealed over Copper plated Alloy 42 leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.008 grams (Approximate) Applications • • • • MOSFET Gate Driving DC-DC Converters Charging circuit Power switches SOT23 C B E Top View Device Symbol Top View Pin-Out Ordering Information (Note 3) Product FMMTL718TA Notes: Marking L78 Reel size (inches) 7 Tape width (mm) 8 Quantity per reel 3,000 1. No purposefully added lead. 2. Diodes Inc.`s “Green” Policy can be found on our website at http://www.diodes.com 3. For Packaging Details, go to our website at http://www.diodes.com. Marking Information L78 = Product Type Marking Code FMMTL718 Document Number: DS33132 Rev. 2 - 2 1 of 5 www.diodes.com June 2011 © Diodes Incorporated A Product Line of Diodes Incorporated FMMTL718 Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Base Current Symbol VCBO VCEO VEBO IC ICM IB Value -20 -20 -5 -1 -2 -200 Unit V V V A A mA Value 500 250 197 -55 to +150 Unit mW °C/W °C/W °C Thermal Characteristics @TA = 25°C unless otherwise specified Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Operating and Storage Temperature Range Notes: Symbol PD RθJA RθJL TJ, TSTG (Note 4) (Note 4) (Note 5) 4. For a device surface mounted on 15mm X 15mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 5. Thermal resistance from junction to solder-point (at the end of the collector lead). Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 6) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector Emitter Cutoff Current Symbol BVCBO BVCEO BVEBO ICBO IEBO ICES Min -20 -20 -5 Typ -65 -55 -8.8 Max -10 -10 -10 Unit V V V nA nA nA Test Condition IC = -100 µA IC = -10 mA IE = -100 µA VCB = -15V VEB = -4V VCE= -15V IC = -10mA, VCE = -2V IC = -100mA, VCE = -2V IC = -0.5A, VCE = -2V IC = -1A, VCE = -2V IC = -1.5A, VCE = -2V IC =- 100mA, IB = -10mA IC =- 500mA, IB = -20mA IC = -1A, IB = -50mA IC = -1.5A, IB = -100mA IC = -1.25A, VCE = -2V IC = -1.25A, IB = -100mA IC = -1.5A VCB = -10V, f = 1MHz VCE = -10V, IC = -50mA, f = 100MHz Collector-Emitter Saturation Voltage (Note 6) VCE(sat) Base-Emitter Turn-On Voltage(Note 6) Base-Emitter Saturation Voltage(Note 6) Equivalent On-Resistance Output Capacitance VBE(on) VBE(sat) RCE(sat) Cobo 500 450 320 200 80 -33 -130 -230 -315 -0.85 -0.95 210 9 Transition Frequency fT 265 MHz Turn-On Time ton 108 ns VCC=-10V, IC =-1A toff 121 ns IB1 = IB2 = -10mA Static Forward Current Transfer Ratio (Note 6) Turn-Off Time Note: 300 300 200 120 50 hFE -50 -180 -320 -450 -1.0 -1.1 12 mV mV mV mV V V mΩ pF 6. Measured under pulsed conditions. Pulse width ≤ 300 µs. Duty cycle ≤ 2% FMMTL718 Document Number: DS33132 Rev. 2 - 2 2 of 5 www.diodes.com June 2011 © Diodes Incorporated A Product Line of Diodes Incorporated FMMTL718 Typical Electrical Characteristics FMMTL718 Document Number: DS33132 Rev. 2 - 2 3 of 5 www.diodes.com June 2011 © Diodes Incorporated A Product Line of Diodes Incorporated FMMTL718 Package Outline Dimensions A SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.903 1.10 1.00 K1 0.400 L 0.45 0.61 0.55 M 0.085 0.18 0.11 0° 8° α All Dimensions in mm B C H K M K1 D J F L G Suggested Pad Layout Y Z C X FMMTL718 Document Number: DS33132 Rev. 2 - 2 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 2.0 C 1.35 E E 4 of 5 www.diodes.com June 2011 © Diodes Incorporated A Product Line of Diodes Incorporated FMMTL718 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. B. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devicesor systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com FMMTL718 Document Number: DS33132 Rev. 2 - 2 5 of 5 www.diodes.com June 2011 © Diodes Incorporated