FE5A THRU FE5D GLASS PASSIVATED FAST EFFICIENT RECTIFIER Reverse Voltage - 50 to 200 Volts Forward Current - 5.0 Amperes D * FEATURES ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Super fast recovery time for high efficiency ♦ Low forward voltage, high current capability ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Hermetically sealed package ♦ Low leakage current ♦ High surge current capability ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T E Case Style G4 0.180 (4.6) 0.115 (2.9) DIA. 1.0 (25.4) MIN. 0.300 (7.6) MAX. 0.042 (1.07) 0.038 (0.962) DIA. 1.0 (25.4) MIN. MECHANICAL DATA Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 Case: Solid glass body Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.037 ounce, 1.04 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS . Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS FE5A FE5B FE5C FE5D UNITS Maximum repetitive peak reverse voltage VRRM 50 100 150 200 Volts Maximum RMS voltage VRMS 35 70 105 140 Volts Maximum DC blocking voltage VDC 50 100 150 200 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=55°C I(AV) 5.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 135.0 Amps VF 0.95 Volts IR 5.0 50.0 µA Maximum reverse recovery time (NOTE 1) trr 35.0 ns Typical junction capacitance (NOTE 2) CJ 100.0 pF Typical thermal resistance (NOTE 3, 4) RΘJA RΘJL 55.0 20.0 °C/W TJ, TSTG -65 to +175 °C Maximum instantaneous forward voltage at 5.0A Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=100°C Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 VDC (3) Thermal resistance from junction to lead at 0.375" (9.5mm) lead length with both leads attached to heatsinks (4) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length and mounted on P.C.B. 4/98 RATINGS AND CHARACTERISTIC CURVES FE5A THRU FE5D FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE 175 RESISTIVE OR INDUCTIVE LOAD 5.0 TL L 0.375" (9.5mm) 4.0 3.0 2.0 1.0 0 0 25 50 75 100 125 150 175 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 6.0 LEAD TEMPERATURE, °C TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 150 125 100 75 50 25 0 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES 1,000 TJ=25°C 10 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 100 TJ=125°C 10 TJ=100°C 1 0.1 TJ=25°C INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.01 0 FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 250 TJ=25°C f=1.0 MHz Vsig=50mVp-p 200 150 100 50 0 0.1 1 10 REVERSE VOLTAGE, VOLTS 100 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100