EGP30A THRU EGP30G GLASS PASSIVATED FAST EFFICIENT RECTIFIER Forward Voltage - 50 to 400 Volts FEATURES N T E D * Case Style GP20 E P A T Reverse Current - 3.0 Amperes 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. ® 0.375 (9.5) 0.285 (7.2) ♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Glass passivated cavity-free junction ♦ Superfast recovery time for high efficiency ♦ Low forward voltage, high current capability ♦ Low leakage current ♦ High surge current capability ♦ High temperature metallurgically bonded construction ♦ High temperature soldering guaranteed: 300°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 1.0 (25.4) MIN. 0.042 (1.07) 0.037 (0.94) DIA. Dimensions in inches and (millimeters) * Glass-plastic encapsulation technique is covered by Patent No.3,996,602 and brazed-lead assembly by Patent No. 3,930,306 MECHANICAL DATA Case: Molded plastic over solid glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.03 ounce, 0.8 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS EGP 30A EGP 30B EGP 30C EGP 30D EGP 30F EGP 30G UNITS Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 Volts Maximum RMS voltage VRMS 35 70 105 140 210 280 Volts Maximum DC blocking voltage VDC 50 100 150 200 300 400 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load IFSM 125.0 Amps Maximum instantaneous forward voltage at 3.0A 0.95 1.25 Volts IR 5.0 100.0 µA Typical reverse recovery time (NOTE 1) trr 50.0 ns Typical junction capacitance (NOTE 2) CJ Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=125°C VF Typical thermal resistance (NOTE 3) Operating junction and storage temperature range 95.0 pF RΘJA RΘJL 20.0 8.0 °C/W TJ, TSTG -65 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted 4/98 75.0 RATINGS AND CHARACTERISTIC CURVES EGP30A THRU EGP30G FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE 175 RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 3.0 2.0 1.0 0 0 25 50 75 100 125 150 125 100 75 50 25 0 1 175 150 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 AMBIENT TEMPERATURE, °C 100 NUMBER OF CYCLES AT 60 HZ FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 50 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES PULSE WIDTH=300µs 1% DUTY CYCLE 10 TJ=150°C TJ=25°C 1 TJ=25°C 0.1 EGP30A - EGP30D EGP30F & EGP30G 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 TJ=150°C 10 TJ=125°C 1 TJ=75°C 0.1 0.01 TJ=25°C 1.8 0.001 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TRANSIENT THERMAL IMPEDANCE, °CW JUNCTION CAPACITANCE, pF 180 150 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 90 60 0 0.1 EGP30A - EGP30D EGP30F & EGP30G 1 10 100 REVERSE VOLTAGE, VOLTS 60 80 100 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 5 - TYPICAL JUNCTION CAPACITANCE 30 40 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 210 120 20 1,000 100 10 1 0.1 0.01 0.1 1 10 t, PULSE DURATION, sec. 100 120