W005G - W10G 1.5A GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · · · Glass Passivated Die Construction Diffused Junction Low Forward Voltage Drop, High Current Capability Surge Overload Rating to 50A Peak Ideal for Printed Circuit Boards Case to Terminal Isolation Voltage 1500V Plastic Material: UL Flammability Classification Rating 94V-0 UL Listed Under Recognized Component Index, File Number E94661 A WOG B + - D C E Mechanical Data · · · · · · Case: WOG, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: As marked on Body Weight: 1.3 grams (approx.) Mounting Position: Any Marking: Type Number - + Dim Min Max A 8.84 9.86 B 4.00 4.60 C 27.90 ¾ D 25.40 ¾ E 0.71 0.81 G 4.60 5.60 All Dimensions in mm G G Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol W005G W01G Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage W02G W04G W06G W08G W10G Unit V VRRM VRWM VR 50 100 200 400 600 800 1000 VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current (Note 1) @ TA = 25°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load per element (JEDEC Method) Forward Voltage (per element) @ IF = 1.5A IO 1.5 A IFSM 50 A VFM 1.0 V Peak Reverse Current at Rated DC Blocking Voltage @ TA = 25°C @ TA = 125°C IRM 5.0 500 µA Typical Junction Capacitance (Note 2) Cj 12 pF Typical Thermal Resistance Junction to Case (Note 1) RqJC 84 K/W Tj, TSTG -65 to +150 °C Operating and Storage Temperature Range Notes: 1. Thermal resistance from junction to case mounted on PC board with 13 x 13mm (0.03mm thick) land areas. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. DS21202 Rev. F-2 1 of 2 W005G - W10G IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FORWARD CURRENT (A) 1.5 Single phase half-sine-wave 60Hz resistive or inductive load 1.0 0.5 0 0 25 50 75 100 125 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 150 1.0 0.1 Tj = 25°C Pulse width = 300µs 0.01 0.2 0.6 1.0 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 50 Tj = 25°C f = 1mz Pulse Width 8.3 ms Single Half-Sine-Wave (JEDEC Method) 40 Cj, JUNCTION CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 10 30 20 10 0 1 1 100 10 1 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (µA) 10 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100 200 100 Tj = 100°C 10 1.0 Tj = 25°C 0.1 0.01 120 0 40 80 160 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS21202 Rev. F-2 2 of 2 W005G - W10G