DDTA (R2-ONLY SERIES) UA PNP PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR NEW PRODUCT Features • • • • • Epitaxial Planar Die Construction Complementary NPN Types Available (DDTC) Built-In Biasing Resistor, R2 only Lead Free/RoHS Compliant (Note 2) "Green" Device, (Note 3 and 4) A C B C Mechanical Data • • • • • • • • • • SOT-323 E B Case: SOT-323 Case Material: Molded Plastic, "Green" Molding Compound, Note 4. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminal Connections: See Diagram Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Marking: Date Code and Type Code, See Page 3 Type Code: See Table Below Ordering Information: See Page 3 Weight: 0.006 grams (approximate) P/N DDTA114GUA DDTA124GUA DDTA144GUA DDTA115GUA R2 (NOM) 10KΩ 22KΩ 47KΩ 100KΩ Maximum Ratings G H K M J D E L C B R2 Dim Min Max A 0.25 0.40 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal E 0.30 0.40 G 1.20 1.40 H 1.80 2.20 J 0.0 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.18 α 0° 8° All Dimensions in mm E SCHEMATIC DIAGRAM Type Code P26 P27 P28 P29 @TA = 25°C unless otherwise specified Symbol Value Unit Collector-Base Voltage Characteristic VCBO -50 V Collector-Emitter Voltage VCEO -50 V Emitter-Base Voltage VEBO -5 V Collector Current IC (Max) -100 mA Power Dissipation Pd 200 mW RθJA 625 °C/W Tj, TSTG -55 to +150 °C Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage Temperature Range Notes: 1. Mounted on FR4 PC Board with recommended pad layout as shown on Diodes Inc., suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf 2. No purposefully added lead. 3. Diodes Inc.'s "Green" Policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 4. Product manufactured with date code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to date code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30328 Rev. 6 - 2 1 of 3 www.diodes.com DDTA (R2-ONLY SERIES) UA © Diodes Incorporated Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Collector Cutoff Current DDTA114GUA DDTA124GUA DDTA144GUA DDTA115GUA Emitter Cutoff Current Collector-Emitter Saturation Voltage DC Current Transfer Ratio Min -50 -50 Typ ⎯ ⎯ Max ⎯ ⎯ BVEBO 5 ⎯ ⎯ ICBO ⎯ ⎯ -0.5 -580 -260 -130 -58 -0.3 ⎯ ΔR2 ⎯ -300 -140 -65 -30 ⎯ 30 56 68 82 -30 fT ⎯ IEBO VCE(sat) DDTA114GUA DDTA124GUA DDTA144GUA DDTA115GUA Bleeder Resistor (R2) Tolerance Gain-Bandwidth Product* hFE Unit Test Condition V IC = -50μA V IC = -1mA IE = -720μA, DDTA114GUA IE = -330μA, DDTA124GUA V IE = -160μA, DDTA144GUA IE = -72μA, DDTA115GUA μA VCB = -50V μA VEB = -4V V IC = -10mA, IB = -0.5mA ⎯ ⎯ IC = -5mA, VCE = -5V ⎯ +30 % 250 ⎯ MHz ⎯ VCE = -10V, IE = 5mA, f = 100MHz ⎯ * Transistor - For Reference Only Typical Curves – DDTA114GUA VCE(SAT), MAXIMUM COLLECTOR VOLTAGE (V) PD, POWER DISSIPATION (mW) 250 200 150 100 50 0 -50 0 50 100 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Derating Curve 150 1 IC/IB = 10 75°C 0.1 -25°C 25°C 0.01 0.001 0 40 10 20 30 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC 50 12 1,000 VCE = 10 IE = 0V 10 COB, CAPACITANCE (pF) hFE, DC CURRENT GAIN (NORMALIZED) NEW PRODUCT Emitter-Base Breakdown Voltage Symbol BVCBO BVCEO 100 8 6 4 2 10 1 DS30328 Rev. 6 - 2 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 100 2 of 3 www.diodes.com 0 0 20 15 25 10 5 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 30 DDTA (R2-ONLY SERIES) UA © Diodes Incorporated 1,000 10 75°C VO = 0.2 100 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) 25°C 10 -25°C 1 0.1 1 0.01 0.001 0 6 7 8 9 5 3 4 Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current vs. Input Voltage 1 2 0.1 10 0 200 300 400 500 600 700 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current 100 Ordering Information (Note 4 & 5) Notes: Device Packaging Shipping DDTA114GUA-7-F SOT-323 3000/Tape & Reel DDTA124GUA-7-F SOT-323 3000/Tape & Reel DDTA144GUA-7-F SOT-323 3000/Tape & Reel DDTA115GUA-7-F SOT-323 3000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information XXX Date Code Key Year XXX = Product Type Marking Code, See Table on Page 1 YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September YM NEW PRODUCT VO = 5V 2006 2007 2008 T U V Code 2009 W 2010 X Month Jan Feb Mar Apr May Jun Jul Code 1 2 3 4 5 6 7 Aug 8 2011 Y Sep 9 Oct O 2012 Z Nov N Dec D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30328 Rev. 6 - 2 3 of 3 www.diodes.com DDTA (R2-ONLY SERIES) UA © Diodes Incorporated