DDTA (R1-ONLY SERIES) E PNP PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR NEW P R ODUC T Features • • • • • A Epitaxial Planar Die Construction Complementary NPN Types Available (DDTC) Built-In Biasing Resistor, R1 only Lead Free/RoHS Compliant (Note 2) "Green" Device (Note 3 and 4) C B Mechanical Data • • • • • • • • • E G Case: SOT-523 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Terminal Connections: See Diagram Marking & Date Code Information: See Diagrams & Page 4 Ordering Information: See Page 4 Weight: 0.002 grams (approximate) H K DDTA113TE DDTA123TE DDTA143TE DDTA114TE DDTA124TE DDTA144TE DDTA115TE DDTA125TE R1 (NOM) 1KΩ 2.2KΩ 4.7KΩ 10KΩ 22KΩ 47KΩ 100KΩ 200KΩ Maximum Ratings M N J L D R1 P/N SOT-523 B C TOP VIEW C B MARKING Dim Min Max Typ A 0.15 0.30 0.22 B 0.75 0.85 0.80 C 1.45 1.75 1.60 D ⎯ ⎯ 0.50 G 0.90 1.10 1.00 H 1.50 1.70 1.60 J 0.00 0.10 0.05 K 0.60 0.80 0.75 L 0.10 0.30 0.22 M 0.10 0.20 0.12 N 0.45 0.65 0.50 α 0° 8° ⎯ All Dimensions in mm P01 P03 P07 P12 P16 P19 P23 P25 E SCHEMATIC DIAGRAM @TA = 25°C unless otherwise specified Characteristic Symbol Value Unit Collector-Base Voltage VCBO -50 V Collector-Emitter Voltage VCEO -50 V Emitter-Base Voltage VEBO -5 V Collector Current IC (Max) -100 mA Power Dissipation Pd 150 mW RθJA 833 °C/W Tj, TSTG -55 to +150 °C Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage Temperature Range Notes: 1. Mounted on FR4 PC Board with recommended pad layout as shown on Diodes Inc., suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf 2. No purposefully added lead. 3. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 4. Product manufactured with Date Code UO (week 40, 2007) and newer are built with Green Molding Compound. Product manufactured prior to Date Code UO are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30319 Rev. 6 - 2 1 of 4 www.diodes.com DDTA (R1-ONLY SERIES) E © Diodes Incorporated Electrical Characteristics NEW PRODUCT Characteristic @TA = 25°C unless otherwise specified Symbol Min Typ Max Unit Test Condition Collector-Base Breakdown Voltage BVCBO -50 ⎯ ⎯ V IC = -50μA Collector-Emitter Breakdown Voltage BVCEO -50 ⎯ ⎯ V IC = -1mA Emitter-Base Breakdown Voltage BVEBO -5 ⎯ ⎯ V IE = -50μA Collector Cutoff Current ICBO ⎯ ⎯ -0.5 μA VCB = -50V Emitter Cutoff Current IEBO ⎯ ⎯ -0.5 μA VEB = -4V VCE(sat) ⎯ ⎯ -0.3 V IC/IB = -10mA/-1mA IC/IB = -5mA/-0.5mA IC/IB = -2.5mA/-.25mA IC/IB = -1mA/-.1mA IC/IB = -5mA/-0.5mA IC/IB = -2.5mA/-.25mA IC/IB = -1mA/-0.1mA IC/IB = -.5mA/-.05mA DC Current Transfer Ratio hFE 100 250 600 ⎯ IC = -1mA, VCE = -5V Gain-Bandwidth Product* fT ⎯ 250 ⎯ MHz VCE = -10V, IE = 5mA, f = 100MHz Collector-Emitter Saturation Voltage DDTA113TE DDTA123TE DDTA143TE DDTA114TE DDTA124TE DDTA144TE DDTA115TE DDTA125TE * Transistor - For Reference Only DS30319 Rev. 6 - 2 2 of 4 www.diodes.com DDTA (R1-ONLY SERIES) E © Diodes Incorporated Typical Curves – DDTA114TE VCE(SAT), MAXIMUM COLLECTOR VOLTAGE (V) Pd, POWER DISSIPATION (MILLIWATTS) 200 150 100 50 0 -50 0 50 150 100 1 IC/IB = 10 25° C 0.1 -25°C 75° C 0.01 0.001 10 0 30 40 50 12 1,000 IE = 0V 10 COB, CAPACITANCE (pF) hFE, DC CURRENT GAIN (NORMALIZED) 20 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC TA, AMBIENT TEMPERATURE (°C) Fig. 1 Derating Curve 100 10 8 6 4 2 0 1 1 0 100 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 10 5 15 20 25 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 10 100 VO = 0.2 10 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) NEW PRODUCT 250 1 0.1 1 0.01 0 0.001 0 1 2 3 4 5 6 7 8 9 10 0 DS30319 Rev. 6 - 2 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current vs. Input Voltage 3 of 4 www.diodes.com DDTA (R1-ONLY SERIES) E © Diodes Incorporated NEW PRODUCT Ordering Information (Note 5) Device DDTA113TE-7-F DDTA123TE-7-F DDTA143TE-7-F DDTA114TE-7-F DDTA124TE-7-F DDTA144TE-7-F DDTA115TE-7-F DDTA125TE-7-F Notes: Packaging SOT-523 SOT-523 SOT-523 SOT-523 SOT-523 SOT-523 SOT-523 SOT-523 Shipping 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information XXX = Product Type Marking Code (See Page 1, e.g. P01 = DDTA113TE) YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September XXXYM Date Code Key Year 2006 2007 2008 2009 2010 2011 2012 T U V W X Y Z Code Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30319 Rev. 6 - 2 4 of 4 www.diodes.com DDTA (R1-ONLY SERIES) E © Diodes Incorporated