DDA (xxxx) U PNP PRE-BIASED SMALL SIGNAL DUAL SURFACE MOUNT TRANSISTOR • • • • A Epitaxial Planar Die Construction Built-In Biasing Resistors Lead Free/RoHS Compliant (Note 3) "Green" Device (Note 4 and 5) • • • • • • • Case: SOT-363 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 K Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). J Terminal Connections: See Diagram Marking Information: See Diagrams & Page 5 Ordering Information: See Page 5 Weight: 0.006 grams (approximate) P/N DDA124EU DDA144EU DDA114YU DDA123JU DDA114EU DDA113TU DDA143TU DDA114TU Maximum Ratings R1 R2 22KΩ 47KΩ 10KΩ 2.2KΩ 10KΩ 1KΩ 4.7KΩ 10KΩ 22KΩ 47KΩ 47KΩ 47KΩ 10KΩ ⎯ ⎯ ⎯ H M D Min Max A 0.10 0.30 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal F 0.30 0.40 H 1.80 2.20 J ⎯ 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.25 α 0° 8° 6 MARKING P17 P20 P14 P06 P13 P01 P07 P12 5 4 6 R1 R 2 2 4 R1 R2 R1 1 5 R1 3 1 R1, R2 2 3 R1 Only SCHEMATIC DIAGRAM @TA = 25°C unless otherwise specified Supply Voltage, (1) to (6) and (4) to (3) Input Voltage, (1) to (2) and (4) to (5) Output Current Output Current DDA124EU DDA144EU DDA114YU DDA123JU DDA114EU DDA113TU DDA143TU DDA114TU DDA124EU DDA144EU DDA114YU DDA123JU DDA114EU DDA113TU DDA143TU DDA114TU All Thermal Resistance, Junction to Ambient Air Symbol Value Unit VCC V IC (Max) 50 +10 to -40 +10 to -40 +6 to -40 +5 to -12 +10 to -40 +5V max +5V max +5V max -30 -30 -70 -100 -50 -100 -100 -100 -100 Pd 200 mW RθJA 625 °C/W VIN IO Power Dissipation (Total) 1. 2. 3. 4. 5. L F Dim All Dimensions in mm Characteristic Notes: B C PXX YM Mechanical Data • • SOT-363 PXX YM NEW PRODUCT Features (Note 1) V mA mA Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. 150mW per element must not be exceeded. No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Product manufactured with Date Code UO (week 40, 2007) and newer are built with Green Molding Compound. Product manufactured prior to Date Code UO are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30346 Rev. 9 - 2 1 of 5 www.diodes.com DDA (xxxx) U © Diodes Incorporated Electrical Characteristics @TA = 25°C unless otherwise specified NEW PRODUCT Characteristic (DDA113TU & DDA143TU & DDA114TU only) Symbol Min Typ Max Unit Collector-Base Breakdown Voltage BVCBO -50 ⎯ ⎯ V IC = -50μA Collector-Emitter Breakdown Voltage BVCEO -50 ⎯ ⎯ V IC = -1mA Emitter-Base Breakdown Voltage BVEBO -5 ⎯ ⎯ V IE = -50μA Collector Cutoff Current ICBO ⎯ ⎯ -0.5 μA VCB = -50V Emitter Cutoff Current IEBO ⎯ ⎯ -0.5 μA VEB = -4V VCE(sat) ⎯ ⎯ -0.3 V IC/IB = -2.5mA / -0.25mA IC/IB = -1mA / -0.1mA IC/IB = -10mA / -1mA DC Current Transfer Ratio hFE 100 250 600 ⎯ IC = -1mA, VCE = -5V Input Resistor (R1) Tolerance ΔR1 -30 ⎯ +30 % fT ⎯ 250 ⎯ MHz Collector-Emitter Saturation Voltage Gain-Bandwidth Product* Characteristic Input Voltage Output Voltage Input Current DDA124EU DDA144EU DDA114YU DDA123JU DDA114EU DDA124EU DDA144EU DDA114YU DDA123JU DDA114EU DDA124EU DDA144EU DDA114YU DDA123JU DDA114EU DDA124EU DDA144EU DDA114YU DDA123JU DDA114EU Output Current DC Current Gain Input Resistor (R1) Tolerance Resistance Ratio Tolerance Gain-Bandwidth Product* DDA124EU DDA144EU DDA114YU DDA123JU DDA114EU ⎯ Min Typ Vl(off) -0.5 -0.5 -0.3 -0.5 -0.5 -1.1 -1.1 ⎯ ⎯ -1.1 -1.9 -1.9 ⎯ ⎯ −1.9 -3.0 -3.0 -1.4 -1.1 -3.0 V -0.1 -0.3 V ⎯ ⎯ -0.36 -0.18 -0.88 -3.6 -0.88 mA VI = -5V IO(off) ⎯ ⎯ -0.5 μA VCC = -50V, VI = -0V Gl 56 68 68 80 30 ⎯ ⎯ ⎯ VO = -5V, IO = -5mA VO = -5V, IO = -5mA VO = -5V, IO = -10mA VO = -5V, IO = -10mA VO = -5V, IO = -5mA ΔR1 -30 ⎯ +30 % ⎯ R2/R1 -20 ⎯ +20 % ⎯ fT ⎯ 250 ⎯ ⎯ VO(on) ⎯ Il DDA143TU DDA114TU DDA113TU VCE = -10V, IE = 5mA, f = 100MHz Symbol Vl(on) Max Test Condition Unit ⎯ Test Condition VCC = -5V, IO = -100μA VO = -0.3, IO = -5mA VO = -0.3, IO = -2mA VO = -0.3, IO = -1mA VO = -0.3, IO = -5mA VO = -0.3, IO = -10mA IO/Il = -10mA / -0.5mA IO/Il = -10mA / -0.5mA IO/Il = -5mA / -0.25mA IO/Il = -5mA / -0.25mA IO/Il = -10mA / -0.5mA MHz VCE = -10V, IE = -5mA, f = 100MHz * Transistor - For Reference Only DS30346 Rev. 9 - 2 2 of 5 www.diodes.com DDA (xxxx) U © Diodes Incorporated Typical Curves – DDA123JU One Section 1 VCE(SAT), COLLECTOR EMITTER VOLTAGE (V) PD , POWER DISSIPATION (mW) 200 150 100 50 0 -50 0 50 100 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Derating Curve 150 IC/IB = 10 75°C 0.1 -25°C 25°C 0.01 0.001 1,000 20 30 10 40 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC 0 f = 1MHz COB, CAPACITANCE (pF) hFE, DC CURRENT GAIN 50 12 VCE = 10V 75°C 100 10 8 6 4 2 0 10 1 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 100 100 0 5 10 15 25 20 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 30 10 75°C VO = 5V 25°C 10 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) NEW PRODUCT 250 -25°C 1 0.1 1 0.01 0.001 0 DS30346 Rev. 9 - 2 3 4 8 9 5 6 7 Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current vs. Input Voltage 1 2 0.1 10 3 of 5 www.diodes.com 0 50 10 20 30 40 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current DDA (xxxx) U © Diodes Incorporated Typical Curves – DDA114TU One Section VCE(SAT), COLLECTOR EMITTER VOLTAGE (V) PD, POWER DISSIPATION (mW) 1 200 150 100 50 0 -50 0 50 100 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Derating Curve 150 IC/IB = 10 25°C 0.1 -25°C 75°C 0.01 0.001 1,000 40 10 20 30 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC 0 50 12 COB, CAPACITANCE (pF) hFE, DC CURRENT GAIN f = 1MHz 100 10 10 8 6 4 2 0 1 1 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 100 100 0 5 10 15 20 25 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance 30 10 VO = 0.2V 25°C 10 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) NEW PRODUCT 250 1 0.1 -25°C 1 0.01 1 0.001 0 6 7 8 9 5 3 4 Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current vs. Input Voltage 1 DS30346 Rev. 9 - 2 2 0 10 4 of 5 www.diodes.com 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current DDA (xxxx) U © Diodes Incorporated Notes: Device Packaging Shipping DDA124EU-7-F SOT-363 3000/Tape & Reel DDA144EU-7-F SOT-363 3000/Tape & Reel DDA114YU-7-F SOT-363 3000/Tape & Reel DDA123JU-7-F SOT-363 3000/Tape & Reel DDA114EU-7-F SOT-363 3000/Tape & Reel DDA113TU-7-F SOT-363 3000/Tape & Reel DDA143TU-7-F SOT-363 3000/Tape & Reel DDA114TU-7-F SOT-363 3000/Tape & Reel 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information PXX = Product Type Marking Code See Page 1 Table YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September PXX YM NEW PRODUCT Ordering Information (Note 6) PXX YM Date Code Key Year 2004 2005 2006 2007 2008 2009 2010 2011 2012 Code R S T U V W X Y Z Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30346 Rev. 9 - 2 5 of 5 www.diodes.com DDA (xxxx) U © Diodes Incorporated