DIODES 74LVC06A

74LVC06A
HEX INVERTERS WITH OPEN DRAIN OUTPUTS
Description
Pin Assignments
The 74LVC06A provides six independent open-drain inverter buffers.
The device is designed for operation with a power supply range of
1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to
be used in a mixed voltage environment. The device is fully specified
for partial power down applications using IOFF. The IOFF circuitry
disables the output preventing damaging current backflow when the
device is powered down. The outputs can be connected to implement
active-low wired-OR or active-high wired-AND functions.
The gates perform the positive Boolean function:
Y=A
Features
•
Wide Supply Voltage Range from 1.65V to 5.5V
•
Sinks 24mA at VCC = 3.3V
•
CMOS Low Power Consumption
Applications
•
IOFF Supports Partial-Power-Down Mode Operation
•
Voltage Level Shifting
•
Inputs or Outputs Accept Up to 5.5V
•
General Purpose Logic
•
Inputs Can be Driven by 3.3V or 5.5V Allowing for Voltage
•
Power Down Signal Isolation
Translation Applications.
•
•
•
Wide array of products such as:
ESD Protection Exceeds JESD 22
ƒ
PCs, networking, notebooks, ultrabooks, netbooks
ƒ
200-V Machine Model (A115-A)
ƒ
Computer peripherals, hard drives, CD/DVD ROM
ƒ
2000-V Human Body Model (A114-A)
ƒ
TV, DVD, DVR, set top box
ƒ
Exceeds 1000-V Charged Device Model (C101C)
Latch-Up Exceeds 250mA per JESD 78, Class II
•
Range of Package Options SO-14 and TSSOP-14
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3) Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC06A
Document number: DS35259 Rev. 4 - 2
1 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
Pin Descriptions
Pin Number
Pin Name
Description
1
1A
2
1Y
Data Output
3
2A
Data Input
Data Input
4
2Y
Data Output
5
3A
Data Input
6
3Y
Data Output
7
GND
8
4Y
Data Output
Data Input
Ground
9
4A
10
5Y
Data Output
11
5A
Data Input
12
6Y
Data Output
13
6A
Data Input
14
VCC
Supply Voltage
Logic Diagram
Function Table
Inputs
A
Outputs
Y
H
L
L
Z
74LVC06A
Document number: DS35259 Rev. 4 - 2
2 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
VCC
Rating
Unit
Human Body Model ESD Protection
Description
2
KV
Charged Device Model ESD Protection
1
KV
200
V
Machine Model ESD Protection
Supply Voltage Range
-0.5 to +6.5
V
VI
Input Voltage Range
-0.5 to +6.5
V
VO
Voltage applied to output in high impedance or IOFF state
-0.5 to +6.5
V
VO
Voltage applied to output in high or low state
-0.3 to VCC +0.5
V
IIK
Input Clamp Current
VI < 0
-50
mA
IOK
Output Clamp Current
VO < 0
-50
mA
IO
Continuous Output Current
50
mA
±100
mA
TJ
Operating Junction Temperature
-40 to +150
°C
TSTG
Storage Temperature
-65 to +150
°C
PTOT
Total Power Dissipation
500
mW
Continuous current through Vdd or GND
Note:
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
VI
VO
Parameter
Input Voltage
Output Voltage
Δt/ΔV
Input transition rise or fall rate
TA
Operating free-air temperature
Notes:
Conditions
Supply Voltage
Min
Max
Unit
1.65
5.5
V
0
5.5
V
Active Mode
0
VCC
V
VCC = 0V; Power Down Mode
0
5.5
V
VCC = 1.65V to 2.7V
20
VCC = 2.7V to 5.5V
10
-40
+125
ns/V
°C
5. Unused inputs should be held at VCC or Ground.
74LVC06A
Document number: DS35259 Rev. 4 - 2
3 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
VIH
VIL
Parameter
Test Conditions
High-level Input
Voltage
Z State
IOZ
II
Leakage
Current
Input Current
Power Down
IOFF
Leakage
Current
ICC
Supply Current
Max
Min
1.65V to 1.95V
0.65 X VCC
0.65 X VCC
2.3V to 2.7V
1.7
1.6
2.7V to 3.6V
2.0
2.0
4.5V to 5.5V
0.7 X VCC
2.0
Max
Unit
1.65V to 1.95V
0.35 X VCC
0.35 X VCC
2.3V to 2.7V
0.7
0.7
2.7V to 3.6V
0.8
0.8
4.5V to 5.5V
0.3 X VCC
0.3 X VCC
V
IOL = 100μA
VOL
Min
TA = -40°C to +125°C
V
Low-level input
voltage
Low-level
Output Voltage
TA = -40°C to +85°C
VCC
1.65V to 5.5V
0.2
0.3
IOL = 4mA
1.65V
0.45
0.6
IOL = 8mA
2.3V
0.70
0.85
2.7V
0.40
0.6
IOL = 12mA
V
3.0V
0.55
0.6
IOL = 24mA
3.0V
0.55
0.6
IOL= 32mA
4.5V
0.55
0.6
3.6V
±10
±20
μA
3.6V
±5
± 20
μA
0
10
20
μA
3.6V
10
40
μA
VO = GND or
5.5V
VI =GND to 5.5V
VI or VO = 0V to
3.6V
VI = GND or VCC
IO=0
74LVC06A
Document number: DS35259 Rev. 4 - 2
4 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
Switching Characteristics
Symbol
Parameter
Test
Conditions
VCC
1.65V to1.95V
tPLZ /tPZL
Propagation
Delay AN to YN
Figure 1
-40°C to +85°C
TA = +25°C
-40°C to +125°C
Min
Typ
Max
Min
Max
Min
Max
0.3
2.9
5.3
0.3
5.6
0.3
7.6
2.3V to 2.7V
0.3
2.6
4.1
0.3
4.7
0.3
5.5
2.7V
0.3
2.5
4.0
0.3
4.5
0.3
5.0
3V to 3.6V
0.3
2.3
3.5
0.3
3.7
0.3
5.0
4.5V to 5.5V
0.3
1.7
2.5
0.3
3.4
0.3
4.5
Unit
ns
Operating Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
Power dissipation
Cpd
capacitance per gate
CI
Input Capacitance
Test
Conditions
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
Typ
Typ
Typ
Typ
f = 10 MHz
7.0
7.5
8.0
8.6
pF
4
4
4
4
pF
VI = VCC – or
GND
Unit
Package Characteristics
Symbol
Note:
Parameter
θJA
Thermal Resistance
Junction-to-Ambient
θJC
Thermal Resistance
Junction-to-Case
Test Conditions
SO-14
TSSOP-14
SO-14
TSSOP-14
VCC
(Note 6)
(Note 6)
Min
Typ
TBD
159
TBD
25
Max
Unit
o
C/W
o
C/W
6. Test condition for SO-14 and TSSOP-14: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74LVC06A
Document number: DS35259 Rev. 4 - 2
5 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
Parameter Measuement Information
VCC
Inputs
Condition
tPLZ (see Note E)
tPZL(see Note D)
VLOAD
VLOAD
VM
VLOAD
CL
RL
V∆
≤2ns
VCC/2
2 X VCC
30pF
1KΩ
0.15V
VCC
≤2ns
VCC/2
2 X VCC
30pF
500Ω
0.15V
2.7V
≤2ns
1.5V
6V
50pF
500Ω
0.3V
1.5V
6V
50pF
500Ω
0.3V
VCC/2
2 X VCC
50pF
500Ω
0.3V
VI
tr/tf
VCC
2.5V±0.2V
2.7V
3.3V±0.3V
3V
≤2.5ns
5V±0.5V
VCC
≤2.5ns
1.8V±0.15V
TEST
Voltage Waveform
Pulse Duration
Voltage Waveform
Propagation Delay Times
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. The inputs are measured one at a time with one transition per measurement.
D. tPZL is measured at VM.
E. tPLZ is measured at VOL +V∆.
Figure 1. Load Circuit and Voltage Waveforms
74LVC06A
Document number: DS35259 Rev. 4 - 2
6 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
Ordering Information
13” Tape and Reel
Part Number Suffix
Device
Package
Code
Packaging
(Note 7)
Quantity
74LVC06AS14-13
S14
SO-14
2500/Tape & Reel
-13
74LVC06AT14-13
T14
TSSOP-14
2500/Tape & Reel
-13
Notes:
7. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf
Marking Information
(1) SO-14, TSSOP-14
( Top View )
14
8
YY : Year : 08, 09,10~
WW : Week : 01~52; 52
represents 52 and 53 week
X : Internal Code
Logo
74LVC06A
YY WW X
Part Number
1
7
Part Number
74LVC06A
Document number: DS35259 Rev. 4 - 2
Package
74LVC06AS14
SO-14
74LVC06AT14
TSSOP-14
7 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
Package Outline Dimensions (All dimensions in mm.)
Package Type: SO-14
E
H
Gauge Plane
L
θ
Detail “A”
D
7°
(4
x)
A2
A
e
B
A1
Detail “A”
SO-14
Dim
Min
Max
A
1.47
1.73
A1
0.10
0.25
A2
1.45 Typ
B
0.33
0.51
D
8.53
8.74
E
3.80
3.99
e
1.27 Typ
H
5.80
6.20
L
0.38
1.27
0°
8°
θ
All Dimensions in mm
0.25
Package Type: TSSOP-14
B
Gauge Plane
Seating Plane
L
F1
a2
Pin# 1 Indent
F
Detail ‘A’
G
K
A
a1
D
TSSOP-14
Dim
Min
Max
a1
7° (4X)
a2
8°
0°
A
4.9
5.10
B
4.30
4.50
C
1.2
⎯
D
0.8
1.05
F
1.00 Typ
F1
0.45
0.75
G
0.65 Typ
K
0.19
0.30
L
6.40 Typ
All Dimensions in mm
C
Detail ‘A’
74LVC06A
Document number: DS35259 Rev. 4 - 2
8 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
Suggested Pad Layout
Package Type: SO-14
X
C1
C2
Dimensions Value (in mm)
X
0.60
Y
1.50
C1
5.4
C2
1.27
Y
Package Type: TSSOP-14
X
C1
C2
Dimensions Value (in mm)
X
0.45
Y
1.45
C1
5.9
C2
0.65
Y
74LVC06A
Document number: DS35259 Rev. 4 - 2
9 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC06A
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
74LVC06A
Document number: DS35259 Rev. 4 - 2
10 of 10
www.diodes.com
July 2012
© Diodes Incorporated