8ETL06PbF/8ETL06FPPbF Vishay High Power Products Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 8 A FRED PtTM FEATURES 8ETL06PbF • Benchmark ultralow forward voltage drop 8ETL06FPPbF Pb-free • Hyperfast recovery time Available • Low leakage current RoHS* • 175 °C operating junction temperature COMPLIANT • Fully isolated package (VINS = 2500 VRMS) Base cathode 2 • UL E78996 approved • Lead (Pb)-free • Designed and qualified for industrial level DESCRIPTION 1 Cathode 1 Cathode 3 Anode State of the art, ultralow VF, soft-switching hyperfast rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimized conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. 3 Anode TO-220 FULL-PAK TO-220AC PRODUCT SUMMARY VF (typical) 0.96 V IF(AV) 8A VR 600 V APPLICATIONS AC-DC SMPS 70 W to 400 W e.g. laptop and printer AC adaptors, desktop PC, TV and monitor, games units and DVD AC-DC power supplies. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Repetitive peak reverse voltage TEST CONDITIONS VALUES UNITS 600 V VRRM Average rectified forward current FULL-PAK IF(AV) TC = 160 °C 8 TC = 142 °C TJ = 25 °C A 175 Non-repetitive peak surge current IFSM Repetitive peak forward current IFM 16 TJ, TStg - 65 to 175 Operating junction and storage temperatures °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR TEST CONDITIONS MIN. TYP. MAX. 600 - - IF = 8 A - 0.96 1.05 IF = 8 A, TJ = 150 °C - 0.81 0.86 VR = VR rated - 0.05 5 TJ = 150 °C, VR = VR rated - 20 100 IR = 100 µA UNITS V Forward voltage VF Reverse leakage current IR Junction capacitance CT VR = 600 V - 17 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH µA * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94028 Revision: 08-Apr-08 For technical questions, contact: [email protected] www.vishay.com 1 8ETL06PbF/8ETL06FPPbF Vishay High Power Products Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 8 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr TEST CONDITIONS MIN. IRRM Reverse recovery charge Qrr MAX. IF = 1 A, dIF/dt = 100 A/µs, VR = 30 V - 60 100 IF = 8 A, dIF/dt = 100 A/µs, VR = 30 V - 150 250 TJ = 25 °C - 170 - - 250 - TJ = 125 °C Peak recovery current TYP. IF = 8 A dIF/dt = 200 A/µs VR = 390 V TJ = 25 °C TJ = 125 °C - 15 - - 20 - UNITS ns A TJ = 25 °C - 1.3 - TJ = 125 °C - 2.6 - MIN. TYP. MAX. UNITS - 65 - 175 °C µC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range Thermal resistance, junction to case TEST CONDITIONS TJ, TStg per leg (FULL-PAK) per leg RthJC - 1.4 2 - 3.4 4.3 Thermal resistance, junction to ambient per leg RthJA Typical socket mount - - 70 Thermal resistance, case to heatsink RthCS Mounting surface, flat, smooth and greased - 0.5 - - 2.0 - - 0.07 - oz. - 12 (10) kgf · cm (lbf · in) Weight 6.0 (5.0) Mounting torque Marking device www.vishay.com 2 Case style TO-220AC Case style TO-220 FULL-PAK For technical questions, contact: [email protected] °C/W g 8ETL06 8ETL06FP Document Number: 94028 Revision: 08-Apr-08 8ETL06PbF/8ETL06FPPbF Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 8 A FRED PtTM 100 Vishay High Power Products 100 IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) TJ = 175 °C 10 TJ = 175 °C TJ = 150 °C TJ = 25 °C 1 0.1 0.4 0.8 1.2 1.6 TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 TJ = 75 °C 0.1 TJ = 50 °C TJ = 25 °C 0.01 0.001 2.0 100 300 200 VF - Forward Voltage Drop (V) 500 400 600 VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 100 200 300 400 500 600 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 t1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 . 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94028 Revision: 08-Apr-08 For technical questions, contact: [email protected] www.vishay.com 3 8ETL06PbF/8ETL06FPPbF Vishay High Power Products Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 8 A FRED PtTM ZthJC - Thermal Impedance (°C/W) 10 1 PDM D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 . 10 1 100 t1 - Rectangular Pulse Duration (s) Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK) 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) 180 175 170 165 DC 160 Square wave (D = 0.50) Rated VR applied 155 See note (1) 160 DC 140 Square wave (D = 0.50) Rated VR applied 120 100 See note (1) 150 80 0 2 4 8 6 10 14 12 0 2 4 6 8 10 12 14 IF(AV) - Average Forward Current (A) IF(AV) - Average Forward Current (A) Fig. 6 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Maximum Allowable Case Temperature vs. Average Forward Current (FULL-PAK) 12 Average Power Loss (W) RMS limit 10 8 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 6 4 2 DC 0 0 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) Fig. 8 - Forward Power Loss Characteristics Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 8); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94028 Revision: 08-Apr-08 8ETL06PbF/8ETL06FPPbF Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 8 A FRED PtTM 450 5000 VR = 390 V TJ = 125 °C TJ = 25 °C 400 350 4000 3500 Qrr (nC) 250 200 3000 2500 150 2000 100 1500 50 0 100 IF = 16 A IF = 8 A 4500 300 trr (ns) Vishay High Power Products IF = 16 A IF = 8 A VR = 390 V TJ = 125 °C TJ = 25 °C 1000 500 100 1000 1000 dIF/dt (A/µs) dIF/dt (A/µs) Fig. 9 - Typical Reverse Recovery Time vs. dIF/dt Fig. 10 - Typical Stored Charge vs. dIF/dt VR = 200 V 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 11 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 12 - Reverse Recovery Waveform and Definitions Document Number: 94028 Revision: 08-Apr-08 For technical questions, contact: [email protected] www.vishay.com 5 8ETL06PbF/8ETL06FPPbF Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 8 A FRED PtTM Vishay High Power Products ORDERING INFORMATION TABLE Device code 8 E T L 06 FP PbF 1 2 3 4 5 6 7 1 - Current rating (8 = 8 A) 2 - E = Single diode 3 - T = TO-220, D2PAK 4 - L = Ultralow VF hyperfast recovery 5 - Voltage rating (06 = 600 V) 6 - None = TO-220AC FP = TO-220 FULL-PAK 7 - None = Standard production PbF = Lead (Pb)-free Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95039 Part marking information http://www.vishay.com/doc?95045 www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 94028 Revision: 08-Apr-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1