ONSEMI MM3Z16VT1G

MM3Z2V4T1 SERIES
Zener Voltage Regulators
200 mW SOD−323 Surface Mount
This series of Zener diodes is packaged in a SOD−323 surface
mount package that has a power dissipation of 200 mW. They are
designed to provide voltage regulation protection and are especially
attractive in situations where space is at a premium. They are well
suited for applications such as cellular phones, hand held portables,
and high density PC boards.
http://onsemi.com
Specification Features:
1
Cathode
• Standard Zener Breakdown Voltage Range − 2.4 V to 75 V
• Steady State Power Rating of 200 mW
• Small Body Outline Dimensions:
•
•
•
•
MARKING
DIAGRAM
0.067″ x 0.049″ (1.7 mm x 1.25 mm)
Low Body Height: 0.035″ (0.9 mm)
Package Weight: 4.507 mg/unit
ESD Rating of Class 3 (>16 kV) per Human Body Model
Pb−Free Package is Available
xx M
SOD−323
CASE 477
Mechanical Characteristics:
CASE: Void-free, transfer-molded plastic
FINISH: All external surfaces are corrosion resistant
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 Seconds
Thermal Resistance from
Junction to Ambient
Junction and Storage
Temperature Range
Symbol
TJ, Tstg
Shipping
MM3ZxxxT1
SOD−323
3000/Tape & Reel
MM3ZxxxT1G
SOD−323
(Pb−Free)
3000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Max
Unit
200
1.5
mW
mW/°C
635
°C/W
DEVICE MARKING INFORMATION
°C
See specific marking information in the device marking
column of the Electrical Characteristics table on page 3 of
this data sheet.
PD
RJA
Package
Device
MAXIMUM RATINGS
Total Device Dissipation FR−5 Board,
(Note 1) @ TA = 25°C
Derate above 25°C
xx = Specific Device Code
M = Date Code
ORDERING INFORMATION
LEADS: Plated with Pb−Sn or Sn only (Pb−Free)
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
MOUNTING POSITION: Any
Rating
2
Anode
−65 to
+150
1. FR−4 Minimum Pad
 Semiconductor Components Industries, LLC, 2004
April, 2004 − Rev. 6
1
Publication Order Number:
MM3Z2V4T1/D
MM3Z2V4T1 SERIES
ELECTRICAL CHARACTERISTICS
I
(TA = 25°C unless otherwise noted,
VF = 0.9 V Max. @ IF = 10 mA for all types)
Parameter
Symbol
VZ
Reverse Zener Voltage @ IZT
IZT
Reverse Current
ZZT
Maximum Zener Impedance @ IZT
IZK
Reverse Current
ZZK
Maximum Zener Impedance @ IZK
IR
Reverse Leakage Current @ VR
VR
Reverse Voltage
IF
Forward Current
VF
Forward Voltage @ IF
VZ
C
IF
VZ VR
IR VF
IZT
Zener Voltage Regulator
Maximum Temperature Coefficient of VZ
Max. Capacitance @VR = 0 and f = 1 MHz
http://onsemi.com
2
V
MM3Z2V4T1 SERIES
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA for all types)
Zener Voltage (Note 2)
Zener Impedance
Leakage Current
VZ
(mV/k)
@ IZT
C
@ VR = 0
f = 1 MHz
@ IZT
ZZT
@ IZT
Max
mA
mA
A
Volts
Min
Max
pF
2.4
2.7
3.0
3.3
3.6
2.6
2.9
3.2
3.5
3.8
5
5
5
5
5
100
100
100
95
90
1000
1000
1000
1000
1000
0.5
0.5
0.5
0.5
0.5
50
20
10
5
5
1.0
1.0
1.0
1.0
1.0
−3.5
−3.5
−3.5
−3.5
−3.5
0
0
0
0
0
450
450
450
450
450
3.7
4.0
4.4
4.8
5.2
3.9
4.3
4.7
5.1
5.6
4.1
4.6
5.0
5.4
6.0
5
5
5
5
5
90
90
80
60
40
1000
1000
800
500
200
0.5
0.5
0.5
0.5
0.5
3
3
3
2
1
1.0
1.0
2.0
2.0
2.0
−3.5
−3.5
−3.5
−2.7
−2.0
−2.5
0
0.2
1.2
2.5
450
450
260
225
200
0E
0F
0G
0H
0K
5.8
6.4
7.0
7.7
8.5
6.2
6.8
7.5
8.2
9.1
6.6
7.2
7.9
8.7
9.6
5
5
5
5
5
10
15
15
15
15
100
160
160
160
160
0.5
0.5
0.5
0.5
0.5
3
2
1
0.7
0.2
4.0
4.0
5.0
5.0
7.0
0.4
1.2
2.5
3.2
3.8
3.7
4.5
5.3
6.2
7.0
185
155
140
135
130
MM3Z10VT1
MM3Z11VT1
MM3Z12VT1
MM3Z13VT1
MM3Z15VT1
0L
0M
0N
0P
0T
9.4
10.4
11.4
12.4
14.3
10
11
12
13.25
15
10.6
11.6
12.7
14.1
15.8
5
5
5
5
5
20
20
25
30
30
160
160
80
80
80
0.5
0.5
0.5
0.5
0.5
0.1
0.1
0.1
0.1
0.05
8.0
8.0
8.0
8.0
10.5
4.5
5.4
6.0
7.0
9.2
8.0
9.0
10
11
13
130
130
130
120
110
MM3Z16VT1
MM3Z18VT1
MM3Z20VT1
MM3Z22VT1
MM3Z24VT1
0U
0W
0Z
10
11
15.3
16.8
18.8
20.8
22.8
16.2
18
20
22
24.2
17.1
19.1
21.2
23.3
25.6
5
5
5
5
5
40
45
55
55
70
80
80
100
100
120
0.5
0.5
0.5
0.5
0.5
0.05
0.05
0.05
0.05
0.05
11.2
12.6
14.0
15.4
16.8
10.4
12.4
14.4
16.4
18.4
14
16
18
20
22
105
100
85
85
80
MM3Z27VT1
MM3Z30VT1
MM3Z33VT1
MM3Z36VT1
MM3Z39VT1
12
14
18
19
20
25.1
28
31
34
37
27
30
33
36
39
28.9
32
35
38
41
2
2
2
2
2
80
80
80
90
130
300
300
300
500
500
0.5
0.5
0.5
0.5
0.5
0.05
0.05
0.05
0.05
0.05
18.9
21.0
23.2
25.2
27.3
21.4
24.4
27.4
30.4
33.4
25.3
29.4
33.4
37.4
41.2
70
70
70
70
45
MM3Z43VT1
MM3Z47VT1
MM3Z51VT1
MM3Z56VT1
MM3Z62VT1
21
1A
1C
1D
1E
40
44
48
52
58
43
47
51
56
62
46
50
54
60
66
2
2
2
2
2
150
170
180
200
215
500
500
500
500
500
0.5
0.5
0.5
0.5
0.5
0.05
0.05
0.05
0.05
0.05
30.1
32.9
35.7
39.2
43.4
37.6
42.0
46.6
52.2
58.8
46.6
51.8
57.2
63.8
71.6
40
40
40
40
35
MM3Z68VT1
MM3Z75VT1
1F
1G
64
70
68
75
72
79
2
2
240
255
500
500
0.5
0.5
0.05
0.05
47.6
52.5
65.6
73.4
79.8
88.6
35
35
VZ (Volts)
Device
Device
Marking
Min
Nom
MM3Z2V4T1
MM3Z2V7T1
MM3Z3V0T1
MM3Z3V3T1
MM3Z3V6T1
00
01
02
05
06
2.2
2.5
2.8
3.1
3.4
MM3Z3V9T1
MM3Z4V3T1
MM3Z4V7T1
MM3Z5V1T1
MM3Z5V6T1
07
08
09
0A
0C
MM3Z6V2T1
MM3Z6V8T1
MM3Z7V5T1
MM3Z8V2T1
MM3Z9V1T1
ZZK @ IZK
IR @ VR
2. Zener voltage is measured with a pulse test current IZ at an ambient temperature of 25°C.
http://onsemi.com
3
MM3Z2V4T1 SERIES
TYPICAL CHARACTERISTICS
1000
TJ = 25°C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IF, FORWARD CURRENT (mA)
Z ZT , DYNAMIC IMPEDANCE ( Ω)
1000
100
100
IZ = 1 mA
5 mA
10
150°C
10
75°C
3.0
10
VZ, NOMINAL ZENER VOLTAGE
80
0.4
Figure 1. Effect of Zener Voltage on
Zener Impedance
0°C
0.5
0.6
0.7
0.8
0.9
1.0
VF, FORWARD VOLTAGE (V)
1.1
1.2
Figure 2. Typical Forward Voltage
1000
TA = 25°C
0 V BIAS
100
1 V BIAS
BIAS AT
50% OF VZ NOM
10
IR, LEAKAGE CURRENT ( µ A)
1000
C, CAPACITANCE (pF)
25°C
1.0
1.0
100
10
1.0
+150°C
0.1
0.01
0.001
+ 25°C
0.0001
−55°C
0.00001
1.0
4.0
10
VZ, NOMINAL ZENER VOLTAGE (V)
70
0
Figure 3. Typical Capacitance
10
20
30
40
50
60
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 4. Typical Leakage Current
http://onsemi.com
4
70
MM3Z2V4T1 SERIES
TYPICAL CHARACTERISTICS
100
100
TA = 25°C
IZ , ZENER CURRENT (mA)
10
1.0
0.1
0.01
10
1
0.1
0.01
0
2.0
4.0
6.0
8.0
VZ, ZENER VOLTAGE (V)
10
12
10
30
50
70
VZ, ZENER VOLTAGE (V)
100
80
60
40
20
0
0
25
90
Figure 6. Zener Voltage versus Zener Current
(12 V to 75 V)
Figure 5. Zener Voltage versus Zener Current
(VZ Up to 12 V)
POWER DISSIPATION (%)
I Z , ZENER CURRENT (mA)
TA = 25°C
50
75
100
TEMPERATURE (°C)
125
Figure 7. Steady State Power Derating
http://onsemi.com
5
150
MM3Z2V4T1 SERIES
PACKAGE DIMENSIONS
SOD−323
CASE 477−02
ISSUE D
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. LEAD THICKNESS SPECIFIED PER L/F
DRAWING WITH SOLDER PLATING.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS OR GATE
BURRS.
5. DIMENSION L IS MEASURED FROM END OF
RADIUS.
K
A
D
1
2
B
DIM
A
B
C
D
E
H
J
K
L
E
C
J
NOTE 3
L
H
NOTE 5
MILLIMETERS
MIN
MAX
1.60
1.80
1.15
1.35
0.80
1.00
0.25
0.40
0.15 REF
0.00
0.10
0.089
0.177
2.30
2.70
0.075
−−−
INCHES
MIN
MAX
0.063
0.071
0.045
0.053
0.031
0.039
0.010
0.016
0.006 REF
0.000
0.004
0.0035 0.0070
0.091
0.106
0.003
−−−
STYLE 1:
PIN 1. CATHODE
2. ANODE
SOLDERING FOOTPRINT*
0.63
0.025
0.83
0.033
1.60
0.063
2.85
0.112
SCALE 10:1
mm inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
6
For additional information, please contact your
local Sales Representative.
MM3Z2V4T1/D