MC78M00, MC78M00A Series 500 mA Positive Voltage Regulators The MC78M00/MC78M00A Series positive voltage regulators are identical to the popular MC7800 Series devices, except that they are specified for only half the output current. Like the MC7800 devices, the MC78M00 three−terminal regulators are intended for local, on−card voltage regulation. Internal current limiting, thermal shutdown circuitry and safe−area compensation for the internal pass transistor combine to make these devices remarkably rugged under most operating conditions. Maximum output current, with adequate heatsinking is 500 mA. http://onsemi.com MARKING DIAGRAMS TO−220 T SUFFIX CASE 221AB Heatsink surface connected to Pin 2. Features • • • • • • MC 78MxxXXT AWLYWWG 1 No External Components Required Internal Thermal Overload Protection Internal Short Circuit Current Limiting Output Transistor Safe−Area Compensation MC78M00A High Accuracy (±2%) Available for 5.0 V, 8.0 V, 12 V and 15 V Pb−Free Packages are Available* 2 3 xx XX A WL Y WW G 4 1.0 k Input 1.0 k 1 2 210 = Voltage Option = Appropriate Suffix Options = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package DPAK−3 DT SUFFIX CASE 369C xxxxxG ALYWW 3 6.7 V 16 k 300 1.0 k 3.6 k 200 3.0 k 300 10 pF 6.4 k 5.6 k Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. 100 0.24 13 2.6 k 520 50 2.0 k 6.0 k 200 xxxxx A L Y WW G = Device Type and Voltage Option Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package Output Pin 1. Input 2. Ground 3. Output 40 pF 3.9 k ORDERING INFORMATION 6.0 k 2.8 k GND See detailed ordering and shipping information in the package dimensions section on page 10−14 of this data sheet. DEVICE MARKING INFORMATION This device contains 28 active transistors. See general marking information in the device marking section on page 10 of this data sheet. Figure 1. Representative Schematic Diagram *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 August, 2006 − Rev. 18 1 Publication Order Number: MC78M00/D MC78M00, MC78M00A Series MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) (Note 1) Rating Symbol Value Unit VI 35 Vdc Input Voltage (5.0 V−18 V) (20 V−24V) 40 Power Dissipation (Package Limitation) Plastic Package, T Suffix TA = 25°C PD Internally Limited Thermal Resistance, Junction−to−Air qJA 70 °C/W Thermal Resistance, Junction−to−Case qJC 5.0 °C/W PD Internally Limited Thermal Resistance, Junction−to−Air qJA 92 °C/W Thermal Resistance, Junction−to−Case qJC 5.0 °C/W Plastic Package, DT Suffix TA = 25°C Operating Junction Temperature Range TJ +150 °C Storage Temperature Range Tstg −65 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL−STD−883, Method 3015. Machine Model Method 200 V. MC78M05C/AC/B/AB ELECTRICAL CHARACTERISTICS (VI = 10 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 2) Characteristics Symbol Output Voltage (TJ = 25°C) MC78M05C MC78M05AC VO Output Voltage Variation (7.0 Vdc ≤ VI ≤ 20 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M05C MC78M05AC VO Line Regulation (TJ = 25°C, 7.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload Input Bias Current (TJ = 25°C) IIB Typ Max 4.8 4.9 5.0 5.0 5.2 5.1 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn Ripple Rejection (IO = 100 mA, f = 120 Hz, 8.0 V ≤ VI ≤ 18 V) (IO = 300 mA, f = 120 Hz, 8.0 ≤ VI ≤ 18 V, TJ = 25°C) RR Dropout Voltage (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) Vdc 4.75 4.80 − − 5.25 5.20 − 3.0 50 − − 20 10 100 50 − 3.2 6.0 − − − − 0.8 0.5 − 40 − 2 mV mV mA mA mV dB 62 62 − 80 − − VI−VO − 2.0 − Vdc IOS − 50 − mA DVO/DT − ±0.2 − mV/°C IO − 700 − mA Thigh = +125°C for MC78MxxAB, AC, B, C http://onsemi.com Unit Vdc DIIB Quiescent Current Change (8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) 2. Tlow = 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B Min MC78M00, MC78M00A Series MC78M06C ELECTRICAL CHARACTERISTICS (VI = 11 V, IO = 350 mA, 0°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted) Characteristics Output Voltage (TJ = 25°C) Output Voltage Variation (8.0 Vdc ≤ VI ≤ 21 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation (TJ = 25°C, 8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Symbol Min Typ Max Unit VO VO 5.75 5.7 6.0 − 6.25 6.3 Vdc Vdc Regline − 5.0 50 mV − − 20 10 120 60 − 3.2 6.0 − − − − − 45 0.8 0.5 − VI − VO 59 59 − − 80 2.0 − − − Vdc IOS DVO/DT − − 50 ±0.2 − − mA mV/°C IO − 700 − mA Unit Regload Input Bias Current (TJ = 25°C) Quiescent Current Change (9.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Ripple Rejection (IO = 100 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V) (IO = 300 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V, TJ = 25°C) Dropout Voltage (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) IIB DIIB Vn RR mV mA mA mV dB MC78M08C/AC/B/AB ELECTRICAL CHARACTERISTICS (VI = 14 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 3) Characteristics Symbol Output Voltage (TJ = 25°C) MC78M08C MC78M08AC Output Voltage Variation (10.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M08C MC78M08AC Line Regulation (TJ = 25°C, 10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Typ Max 7.70 7.84 8.0 8.0 8.30 8.16 VO Vdc VO Vdc 7.6 7.7 − − − 6.0 8.4 8.3 50 − − 25 10 160 80 − 3.2 6.0 − − − − 0.8 0.5 − 52 − VI−VO 56 56 − − 80 2.0 − − − Regline Regload Input Bias Current (TJ = 25°C) IIB Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn Ripple Rejection (IO = 100 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V) (IO = 300 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V, TJ = 25°C) Dropout Voltage (TJ = 25°C) RR Short Circuit Current Limit (TJ = 25°C, VI = 35 V) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) 3 mA mA mV dB Vdc IOS − 50 − mA DVO/DT − ±0.2 − mV/°C IO − 700 − mA Thigh = +125°C for MC78MxxAB, AC, B, C http://onsemi.com mV mV DIIB Quiescent Current Change (10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) 3. Tlow = 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B Min MC78M00, MC78M00A Series MC78M09C/B ELECTRICAL CHARACTERISTICS (VI = 15 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 4) Characteristics Output Voltage (TJ = 25°C) Output Voltage Variation (11.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation (TJ = 25°C, 11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Input Bias Current (TJ = 25°C) Quiescent Current Change (11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Ripple Rejection (IO = 100 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V) (IO = 300 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V, TJ = 25°C) Dropout Voltage (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) Symbol Min Typ Max Unit VO VO 8.64 8.55 9.0 − 9.45 9.45 Vdc Vdc Regline − 6.0 50 mV − − − 25 10 3.2 180 90 6.0 − − − − − 52 0.8 0.5 − VI−VO 56 56 − − 80 2.0 − − − Vdc IOS DVO/DT − − 50 ±0.2 − − mA mV/°C IO − 700 − mA Unit Regload IIB DIIB Vn RR mV mA mA mV dB MC78M12C/AC/B/AB ELECTRICAL CHARACTERISTICS (VI = 19 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 4) Characteristics Symbol Output Voltage (TJ = 25°C) MC78M12C MC78M12AC Output Voltage Variation (14.5 Vdc ≤ VI ≤ 27 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M12C MC78M12AC Line Regulation (TJ = 25°C, 14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Input Bias Current (TJ = 25°C) Quiescent Current Change (14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Ripple Rejection (IO = 100 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V) (IO = 300 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V, TJ = 25°C) Dropout Voltage (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) 4. Tlow = 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B Min Typ Max 11.50 11.76 12 12 12.50 12.24 VO Vdc VO Vdc 11.4 11.5 − − − 8.0 12.6 12.5 50 − − − 25 10 3.2 240 120 6.0 − − − − − 75 0.8 0.5 − VI−VO 55 55 − − 80 2.0 − − − Vdc IOS DVO/DT − − 50 ±0.3 − − mA mV/°C IO − 700 − mA Regline Regload IIB DIIB Vn RR Thigh = +125°C for MC78MxxAB, AC, B, C http://onsemi.com 4 mV mV mA mA mV dB MC78M00, MC78M00A Series MC78M15C/AC/B/AB ELECTRICAL CHARACTERISTICS (VI = 23 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 5) Characteristics Symbol Output Voltage (TJ = 25°C) MC78M15C MC78M15AC Output Voltage Variation (17.5 Vdc ≤ VI ≤ 30 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M15C MC78M15AC Input Regulation (TJ = 25°C, 17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Input Bias Current (TJ = 25°C) Quiescent Current Change (17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Ripple Rejection (IO = 100 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V) (IO = 300 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V, TJ = 25°C) Dropout Voltage (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) Min Typ Max 14.4 14.7 15 15 15.6 15.3 VO Unit Vdc VO Vdc 14.25 14.40 − − − 10 15.75 15.60 50 − − − 25 10 3.2 300 150 6.0 − − − − − 90 0.8 0.5 − VI−VO 54 54 − − 70 2.0 − − − Vdc IOS DVO/DT − − 50 ±0.3 − − mA mV/°C IO − 700 − mA Regline Regload IIB DIIB Vn RR mV mV mA mA mV dB MC78M18C/B ELECTRICAL CHARACTERISTICS (VI = 27 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 5) Characteristics Output Voltage (TJ = 25°C) Output Voltage Variation (21 Vdc ≤ VI ≤ 33 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation (TJ = 25°C, 21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Input Bias Current (TJ = 25°C) Quiescent Current Change (21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Ripple Rejection (IO = 100 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V) (IO = 300 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V, TJ = 25°C) Dropout Voltage (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) 5. Tlow = 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B Symbol Min Typ Max Unit VO VO 17.3 17.1 18 − 18.7 18.9 Vdc Vdc Regline − 10 50 mV − − − 30 10 3.2 360 180 6.5 − − − − − 100 0.8 0.5 − VI−VO 53 53 − − 70 2.0 − − − Vdc IOS DVO/DT − − 50 ±0.3 − − mA mV/°C IO − 700 − mA Regload IIB DIIB Vn RR Thigh = +125°C for MC78MxxAB, AC, B, C http://onsemi.com 5 mV mA mA mV dB MC78M00, MC78M00A Series MC78M20C/B ELECTRICAL CHARACTERISTICS (VI = 29 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 6) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 19.2 20 20.8 Vdc Output Voltage Variation (23 Vdc ≤ VI ≤ 35 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 19 − 21 Vdc Line Regulation (TJ = 25°C, 23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) Regline − 10 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload − − 30 10 400 200 − 3.2 6.5 − − − − 0.8 0.5 − 110 − 52 52 − 70 − − VI−VO − 2.0 − Vdc IOS − 50 − mA DVO/DT − ±0.5 − mV/°C IO − 700 − mA Input Bias Current (TJ = 25°C) IIB mV DIIB Quiescent Current Change (23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn Ripple Rejection (IO = 100 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V) (IO = 300 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V, TJ = 25°C) RR Dropout Voltage (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) mA mA mV dB MC78M24C/B ELECTRICAL CHARACTERISTICS (VI = 33 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 6) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 23 24 25 Vdc Output Voltage Variation (27 Vdc ≤ VI ≤ 38 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 22.8 − 25.2 Vdc Line Regulation (TJ = 25°C, 27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) Regline − 10 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload − − 30 10 480 240 − 3.2 7.0 − − − − 0.8 0.5 − 170 − Input Bias Current (TJ = 25°C) IIB DIIB Quiescent Current Change (27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn Ripple Rejection (IO = 100 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V) (IO = 300 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V, TJ = 25°C) RR Dropout Voltage (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C) Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) Peak Output Current (TJ = 25°C) 6. Tlow = 0°C for MC78MxxAC, C = −40°C for MC78MxxAB, B mV 6 mA mV dB 50 50 − 70 − − VI−VO − 2.0 − Vdc IOS − 50 − mA DVO/DT − ±0.5 − mV/°C IO − 700 − mA Thigh = +125°C for MC78MxxAB, AC, B, C http://onsemi.com mA MC78M00, MC78M00A Series DEFINITIONS Input Bias Current − That part of the input current that is not delivered to the load. Line Regulation − The change in output voltage for a change in the input voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that the average chip temperature is not significantly affected. Output Noise Voltage − The rms AC voltage at the output, with constant load and no input ripple, measured over a specified frequency range. Load Regulation − The change in output voltage for a change in load current at constant chip temperature. Maximum Power Dissipation − The maximum total device dissipation for which the regulator will operate within specifications. 2.4 100 Free Air Mounted Vertically 90 JUNCTION−TO−AIR (°C/W) R θ JA, THERMAL RESISTANCE PD(max) for TA = 50°C 2.0 2.0 oz. Copper L ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ 80 Minimum Size Pad 70 1.6 1.2 L 0.8 60 0.4 50 RqJA 40 0 5.0 10 15 20 25 0 30 L, LENGTH OF COPPER (mm) Figure 2. DPAK Thermal Resistance and Maximum Power Dissipation versus P.C.B. Copper Length PD, POWER DISSIPATION (W) 10 qHS = 10°C/W 5.0 3.0 2.0 Infinite Heat Sink qHS = 20°C/W No Heat Sink 1.0 0.5 0.3 0.2 0.1 25 qJC = 5°C/W PD(max) = 7.52 W 50 75 100 125 TA, AMBIENT TEMPERATURE (°C) Figure 3. Worst Case Power Dissipation versus Ambient Temperature (TO−220) http://onsemi.com 7 150 PD, MAXIMUM POWER DISSIPATION (W) Long Term Stability − Output voltage stability under accelerated life test conditions with the maximum rated voltage listed in the devices’ electrical characteristics and maximum power dissipation. MC78M00, MC78M00A Series 2.5 1.0 0.8 V I −V O , DROPOUT VOLTAGE (V) I O , OUTPUT CURRENT (A) 0.9 TJ = 25°C 0.7 0.6 0.5 0.4 TJ = 125°C 0.3 0.2 0.1 0 0 5.0 10 15 20 25 30 35 IO = 500 mA 1.5 IO = 100 mA 1.0 IO = 10 mA DVO = 100 mV 0.5 0 40 0 25 50 75 100 125 150 VI − VO, DROPOUT VOLTAGE (V) TJ, JUNCTION TEMPERATURE (°C) Figure 4. Peak Output Current versus Dropout Voltage Figure 5. Dropout Voltage versus Junction Temperature 100 100 Iout = 500 mA RR, RIPPLE REJECTION (dB) RR, RIPPLE REJECTION (dB) 2.0 80 Iout = 500 mA Vout = 5.0 V Vin = 10 V CO = 0 TJ = 25°C 60 40 20 1.0 10 100 1.0 k 10 k 100 k 1.0 M 10 M 80 60 40 30 0.01 100 M Vout = 5.0 V Vin = 10 V CO = 0 f = 120 Hz TJ = 25°C 0.1 0.5 1.0 10 f, FREQUENCY (Hz) IO, OUTPUT CURRENT (A) Figure 6. Ripple Rejection versus Frequency Figure 7. Ripple Rejection versus Output Current 5.0 4.0 I B , BIAS CURRENT (mA) I B , BIAS CURRENT (mA) TJ = 25°C 3.0 TJ = 125°C 2.0 TJ = 25°C VO = 5.0 V IO = 0.5 A 1.0 TJ = 125°C 0 0 5.0 10 15 20 25 30 4.0 TJ = 25°C 3.0 2.0 TJ = 125°C 1.0 35 0 0.01 40 VI, INPUT VOLTAGE (Vdc) VI−VO = 5.0 V 0.1 0.5 1.0 10 IO, OUTPUT CURRENT (A) Figure 8. Bias Current versus Input Voltage Figure 9. Bias Current versus Output Current http://onsemi.com 8 MC78M00, MC78M00A Series APPLICATIONS INFORMATION Design Considerations regulator is connected to the power supply filter with long wire lengths, or if the output load capacitance is large. An input bypass capacitor should be selected to provide good high frequency characteristics to insure stable operation under all load conditions. A 0.33 mF or larger tantalum, mylar, or other capacitor having low internal impedance at high frequencies should be chosen. The bypass capacitor should be mounted with the shortest possible leads directly across the regulator’s input terminals. Normally good construction techniques should be used to minimize ground loops and lead resistance drops since the regulator has no external sense lead. The MC78M00/MC78M00A Series of fixed voltage regulators are designed with Thermal Overload Protection that shuts down the circuit when subjected to an excessive power overload condition, Internal Short Circuit Protection that limits the maximum current the circuit will pass, and Output Transistor Safe−Area Compensation that reduces the output short circuit current as the voltage across the pass transistor is increased. In many low current applications, compensation capacitors are not required. However, it is recommended that the regulator input be bypassed with a capacitor if the VO, 7.0 V to 20 V Vin−Vout ≥ 2.0 V MC78M05C Input 0.33 mF R IO Constant Current to Grounded Load Output MC78M05C Input 7 The MC78M00 regulators can also be used as a current source when connected as above. In order to minimize dissipation the MC78M05C is chosen in this application. Resistor R determines the current as follows: IO = 0.33 mF 6 * + 1.0 k 2 0.1 mF 3 10 k 4 MC1741 5.0 V + IIB R IIB = 1.5 mA over line and load changes. The addition of an operational amplifier allows adjustment to higher or intermediate values while retaining regulation characteristics. The minimum voltage obtainable with this arrangement is 2.0 V greater than the regulator voltage. For example, a 500 mA current source would require R to be a 10W, 10 W resistor and the output voltage compliance would be the input voltage less 7.0 V. Figure 10. Current Regulator Figure 11. Adjustable Output Regulator MJ2955 or Equiv. RSC Input MJ2955 or Equiv. Input R MC78MXXC Output R 1.0 mF 1.0 mF 2N6049 or Equiv. MC78MXXC 1.0 mF Output XX = 2 digits of type number indicating voltage. XX = 2 digits of type number indicating voltage. The MC78M00 series can be current boosted with a PNP transistor. The MJ2955 provides current to 5.0 A. Resistor R in conjunction with the VBE of the PNP determines when the pass transistor begins conducting; this circuit is not short circuit proof. Input−output differential voltage minimum is increased by VBE of the pass transistor. The circuit of Figure 12 can be modified to provide supply protection against short circuits by adding a short circuit sense resistor, Rsc, and an additional PNP transistor. The current sensing PNP must be able to handle the short circuit current of the three−terminal regulator .Therefore, a 4.0 A plastic power transistor is specified. Figure 12. Current Boost Regulator Figure 13. Current Boost with Short Circuit Protection http://onsemi.com 9 MC78M00, MC78M00A Series ORDERING INFORMATION Device Output Voltage Temperature Range Package Marking DPAK−3 78M05 DPAK−3 (Pb−Free) 78M05 DPAK−3 78M05 DPAK−3 (Pb−Free) 78M05 DPAK−3 8M05D DPAK−3 (Pb−Free) 8M05D DPAK−3 8M05D DPAK−3 (Pb−Free) 8M05D TO−220 78M05CT MC78M05CTG TO−220 (Pb−Free) 78M05CT MC78M05ACT TO−220 78M05ACT TO−220 (Pb−Free) 78M05ACT DPAK−3 8M05A DPAK−3 (Pb−Free) 8M05A DPAK−3 8M05A DPAK−3 (Pb−Free) 8M05A TO−220 78M05ABT TO−220 (Pb−Free) 78M05ABT DPAK−3 8M05B DPAK−3 (Pb−Free) 8M05B DPAK−3 8M05B DPAK−3 (Pb−Free) 8M05B TO−220 78M05BT TO−220 (Pb−Free) 78M05BT MC78M05CDT MC78M05CDTG MC78M05CDTRK MC78M05CDTRKG MC78M05ACDT MC78M05ACDTG TJ = 0° to +125°C MC78M05ACDTRK MC78M05ACDTRKG MC78M05CT MC78M05ACTG Shipping† 75 Units / Rail 2500 Units / Tape & Reel 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 50 Units / Rail 5.0 V MC78M05ABDT MC78M05ABDTG MC78M05ABDTRK MC78M05ABDTRKG MC78M05ABT MC78M05ABTG MC78M05BDT TJ = −40° to +125°C MC78M05BDTG MC78M05BDTRK MC78M05BDTRKG MC78M05BT MC78M05BTG 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 10 MC78M00, MC78M00A Series ORDERING INFORMATION Device Output Voltage Temperature Range MC78M06CDT MC78M06CDTG MC78M06CDTRK TJ = 0° to +125°C MC78M06CDTRKG MC78M06CT 6.0 V MC78M06CTG MC78M06BT TJ = −40° to +125°C MC78M06BTG MC78M08CDT MC78M08CDTG MC78M08CDTRK MC78M08CDTRKG MC78M08ACDT MC78M08ACDTG TJ = 0° to +125°C MC78M08ACDTRK MC78M08ACDTRKG MC78M08CT Package Marking DPAK−3 78M06 DPAK−3 (Pb−Free) 78M06 DPAK−3 78M06 DPAK−3 (Pb−Free) 78M06 TO−220 78M06CT TO−220 (Pb−Free) 78M06CT TO−220 78M06BT TO−220 (Pb−Free) 78M06BT DPAK−3 78M08 DPAK−3 (Pb−Free) 78M08 DPAK−3 78M08 DPAK−3 (Pb−Free) 78M08 DPAK−3 8M08D DPAK−3 (Pb−Free) 8M08D DPAK−3 8M08D DPAK−3 (Pb−Free) 8M08D TO−220 78M08CT MC78M08CTG TO−220 (Pb−Free) 78M08CT MC78M08ACT TO−220 78M08ACT TO−220 (Pb−Free) 78M08ACT DPAK−3 8M08A DPAK−3 (Pb−Free) 8M08A DPAK−3 8M08A DPAK−3 (Pb−Free) 8M08A TO−220 78M08ABT TO−220 (Pb−Free) 78M08ABT DPAK−3 8M08B DPAK−3 (Pb−Free) 8M08B DPAK−3 8M08B DPAK−3 (Pb−Free) 8M08B TO−220 78M08BT TO−220 (Pb−Free) 78M08BT MC78M08ACTG MC78M08ABDT 8.0 V MC78M08ABDTG MC78M08ABDTRK MC78M08ABDTRKG MC78M08ABT MC78M08ABTG MC78M08BDT TJ = −40° to +125°C MC78M08BDTG MC78M08BDTRK MC78M08BDTRKG MC78M08BT MC78M08BTG Shipping† 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 75 Units / Rail 2500 Units / Tape & Reel 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 11 MC78M00, MC78M00A Series ORDERING INFORMATION Output Voltage Package Marking Shipping† DPAK−3 78M09 75 Units / Rail DPAK−3 (Pb−Free) 78M09 75 Units / Rail DPAK−3 78M09 2500 Units / Tape & Reel DPAK−3 (Pb−Free) 78M09 2500 Units / Tape & Reel TO−220 78M09CT 50 Units / Rail TO−220 (Pb−Free) 78M09CT 50 Units / Rail DPAK−3 8M09B 75 Units / Rail DPAK−3 (Pb−Free) 8M09B 75 Units / Rail DPAK−3 8M09B 2500 Units / Tape & Reel DPAK−3 (Pb−Free) 8M09B 2500 Units / Tape & Reel DPAK−3 78M12 DPAK−3 (Pb−Free) 78M12 DPAK−3 78M12 DPAK−3 (Pb−Free) 78M12 DPAK−3 8M12D DPAK−3 (Pb−Free) 8M12D DPAK−3 8M12D DPAK−3 (Pb−Free) 8M12D MC78M12CT TO−220 78M12CT MC78M12CTG TO−220 78M12CT MC78M12ACT TO−220 78M12ACT TO−220 (Pb−Free) 78M12ACT DPAK−3 8M12A DPAK−3 (Pb−Free) 8M12A DPAK−3 8M12A DPAK−3 (Pb−Free) 8M12A TO−220 78M12ABT TO−220 (Pb−Free) 78M12ABT DPAK−3 8M12B DPAK−3 (Pb−Free) 8M12B DPAK−3 8M12B DPAK−3 (Pb−Free) 8M12B TO−220 78M12BT TO−220 (Pb−Free) 78M12BT Device Temperature Range MC78M09CDT MC78M09CDTG MC78M09CDTRK TJ = 0° to +125°C MC78M09CDTRKG MC78M09CT MC78M09CTG 9.0 V MC78M09BDT MC78M09BDTG TJ = −40° to +125°C MC78M09BDTRK MC78M09BDTRKG MC78M12CDT MC78M12CDTG MC78M12CDTRK MC78M12CDTRKG MC78M12ACDT MC78M12ACDTG TJ = 0° to +125°C MC78M12ACDTRK MC78M12ACDTRKG MC78M12ACTG MC78M12ABDT 12 V MC78M12ABDTG MC78M12ABDTRK MC78M12ABDTRKG MC78M12ABT MC78M12ABTG MC78M12BDT TJ = −40° to +125°C MC78M12BDTG MC78M12BDTRK MC78M12BDTRKG MC78M12BT MC78M12BTG 75 Units / Rail 2500 Units / Tape & Reel 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 12 MC78M00, MC78M00A Series ORDERING INFORMATION Device Output Voltage Temperature Range Package Marking DPAK−3 78M15 DPAK−3 (Pb−Free) 78M15 DPAK−3 78M15 DPAK−3 (Pb−Free) 78M15 DPAK−3 8M15D DPAK−3 (Pb−Free) 8M15D DPAK−3 8M15D DPAK−3 (Pb−Free) 8M15D TO−220 78M15CT MC78M15CTG TO−220 (Pb−Free) 78M15CT MC78M15ACT TO−220 78M15ACT TO−220 (Pb−Free) 78M15ACT DPAK−3 8M15A DPAK−3 (Pb−Free) 8M15A DPAK−3 8M15A DPAK−3 (Pb−Free) 8M15A TO−220 78M15ABT TO−220 (Pb−Free) 78M15ABT DPAK−3 8M15B DPAK−3 (Pb−Free) 8M15B DPAK−3 8M15B DPAK−3 (Pb−Free) 8M15B TO−220 78M15BT TO−220 (Pb−Free) 78M15BT MC78M15CDT MC78M15CDTG MC78M15CDTRK MC78M15CDTRKG MC78M15ACDT MC78M15ACDTG TJ = 0° to +125°C MC78M15ACDTRK MC78M15ACDTRKG MC78M15CT MC78M15ACTG Shipping† 75 Units / Rail 2500 Units / Tape & Reel 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 15 V MC78M15ABDT MC78M15ABDTG MC78M15ABDTRK MC78M15ABDTRKG MC78M15ABT MC78M15ABTG MC78M15BDT TJ = −40° to +125°C MC78M15BDTG MC78M15BDTRK MC78M15BDTRKG MC78M15BT MC78M15BTG 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 13 MC78M00, MC78M00A Series ORDERING INFORMATION Device Output Voltage Temperature Range MC78M18CDT MC78M18CDTG MC78M18CDTRK TJ = 0° to +125°C MC78M18CDTRKG MC78M18CT 18 V MC78M18CTG TJ = −40° to +125°C MC78M18BT MC78M18BTG MC78M20CT MC78M20CTG 20 V MC78M20BT Marking DPAK−3 78M18 DPAK−3 (Pb−Free) 78M18 DPAK−3 78M18 DPAK−3 (Pb−Free) 78M18 TO−220 78M18CT TO−220 (Pb−Free) 78M18CT TO−220 78M18BT TO−220 (Pb−Free) 78M18BT TO−220 78M20CT TJ = 0° to +125°C TO−220 (Pb−Free) 78M20CT TJ = −40° to +125°C TO−220 78M20BT TO−220 78M24CT TO−220 (Pb−Free) 78M24CT TO−220 78M24BT TO−220 (Pb−Free) 78M24BT MC78M24CT TJ = 0° to +125°C MC78M24CTG Package Shipping† 75 Units / Rail 2500 Units / Tape & Reel 50 Units / Rail 50 Units / Rail 24 V MC78M24BT MC78M24BTG TJ = −40° to +125°C †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 14 MC78M00, MC78M00A Series PACKAGE DIMENSIONS DPAK−3 DT SUFFIX CASE 369C−01 ISSUE O −T− C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE E R 4 Z A S 1 2 DIM A B C D E F G H J K L R S U V Z 3 U K F J L H D G 2 PL 0.13 (0.005) M T SOLDERING FOOTPRINT* 6.20 0.244 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 15 INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 −−− 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 −−− 0.89 1.27 3.93 −−− MC78M00, MC78M00A Series PACKAGE DIMENSIONS TO−220, SINGLE GAUGE T SUFFIX CASE 221AB−01 ISSUE O −T− B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.020 0.055 0.235 0.255 0.000 0.050 0.045 −−− −−− 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 0.508 1.39 5.97 6.47 0.00 1.27 1.15 −−− −−− 2.04 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 16 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MC78M00/D