DIODES FCX558TA

A Product Line of
Diodes Incorporated
FCX558
400V PNP SILICON PLANAR HIGH VOLTAGE TRANSISTOR IN SOT89
Features
Mechanical Data
•
•
•
•
•
•
•
•
•
•
•
•
BVCEO > -400V
IC = -200mA high Continuous Current
Low saturation voltage VCE(sat) < -200mV @ -20mA
Complementary NPN type: FCX458
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
•
Case: SOT89
Case material: molded plastic. “Green” molding compound.
UL Flammability Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish - Matte Tin Plated Leads, Solderable per
MIL-STD-202, Method 208
Weight: 0.05 grams (Approximate)
SOT89
C
E
B
C
C
B
E
Top View
Device Symbol
Top View
Pin Out
Ordering Information (Note 4)
Product
FCX558TA
Notes:
Marking
P58
Reel size (inches)
7
Tape width (mm)
12
Quantity per reel
1,000
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green" and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
P58
FCX558
Datasheet Number: DS33059 Rev. 4 - 2
P58 = Product Type Marking Code
1 of 6
www.diodes.com
November 2012
© Diodes Incorporated
A Product Line of
Diodes Incorporated
FCX558
Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Characteristic
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Continuous Collector Current
Peak Pulse Current
Symbol
VCBO
VCEO
VEBO
IC
ICM
Limit
-400
-400
-7
-200
-500
Unit
V
V
V
mA
mA
Symbol
PD
RθJA
RθJL
TJ, TSTG
Value
1
125
10.01
-65 to +150
Unit
W
°C/W
°C/W
°C
Thermal Characteristics
Characteristic
Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient Air (Note 5)
Thermal Resistance, Junction to Leads (Note 6)
Operating and Storage Temperature Range
Notes:
5. For a device surface mounted on 15mm X 15mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; device measured when
operating in steady state condition.
6. Thermal resistance from junction to solder-point (on the exposed collector pad).
1.0
Thermal Resistance (°C/W)
Max Power Dissipation (W)
Thermal Characteristics and Derating Information
0.8
0.6
0.4
0.2
0.0
0
25
50
75
100
125
150
Temperature (°C)
120
100
80
D=0.5
60
40
Single Pulse
D=0.2
D=0.05
20
0
100µ
D=0.1
1m
10m 100m
1
10
100
1k
Pulse Width (s)
Transient Thermal Impedance
Derating Curve
Max Power Dissipation (W)
100
Single Pulse. T amb=25°C
10
1
100µ
1m
10m 100m
1
10
100
1k
Pulse Width (s)
Pulse Power Dissipation
FCX558
Datasheet Number: DS33059 Rev. 4 - 2
2 of 6
www.diodes.com
November 2012
© Diodes Incorporated
A Product Line of
Diodes Incorporated
FCX558
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage (Note 7)
Emitter-Base Breakdown Voltage
Collector Cutoff Current
Emitter Cutoff Current
Emitter Cutoff Current
DC current transfer Static ratio (Note 7)
Symbol
BVCBO
BVCEO
BVEBO
ICBO
IEBO
ICES
Min
-400
-400
-7
-
Typ.
-
Max
-100
-100
-100
Unit
V
V
V
nA
nA
nA
hFE
100
100
15
-
300
-
-
-
-
-0.2
-0.5
-0.9
-0.9
Collector-Emitter Saturation Voltage (Note 7)
VCE(sat)
Base-Emitter Saturation Voltage (Note 7)
Base-Emitter Turn-on Voltage (Note 7)
VBE(sat)
VBE(on)
-
-
fT
50
-
-
MHz
Cobo
ton
toff
-
95
1600
5
pF
-
nS
Transitional Frequency
Output capacitance
Switching times
Notes:
-
V
V
V
Test Condition
IC = -100µA
IC = -1mA
IE = -100µA
VCB = -320V
VEB = -5V
VCES = -320V
IC = -1mA, VCE = -10V
IC = -50mA, VCE = -10V
IC = -100mA, VCE = -10V
IC = -20mA, IB = -2mA
IC = -50mA, IB = -6mA
IC = -50mA, IB = -5mA
IC = -50mA, VCE = -10V
IE = -10mA, VCE = -20V
f = 20MHz
VCB = -20V, f = 1MHz,
IC = -50mA, VC = -100V
IB1 = -5mA, IB2 = -10mA
7. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤ 2%.
FCX558
Datasheet Number: DS33059 Rev. 4 - 2
3 of 6
www.diodes.com
November 2012
© Diodes Incorporated
A Product Line of
Diodes Incorporated
FCX558
Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
FCX558
Datasheet Number: DS33059 Rev. 4 - 2
4 of 6
www.diodes.com
November 2012
© Diodes Incorporated
A Product Line of
Diodes Incorporated
FCX558
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
D1
0
.20
R0
C
1
SOT89
Dim
Min
Max
A
1.40
1.60
B
0.44
0.62
B1
0.35
0.54
C
0.35
0.44
D
4.40
4.60
D1
1.62
1.83
E
2.29
2.60
e
1.50 Typ
H
3.94
4.25
H1
2.63
2.93
L
0.89
1.20
All Dimensions in mm
H
H
E
B1
L
B
e
8° (4X)
A
D
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
X1
X2 (2x)
Y1
Y3
Y4
Y2
Y
C
Dimensions Value (in mm)
X
0.900
X1
1.733
X2
0.416
Y
1.300
Y1
4.600
Y2
1.475
Y3
0.950
Y4
1.125
C
1.500
X (3x)
FCX558
Datasheet Number: DS33059 Rev. 4 - 2
5 of 6
www.diodes.com
November 2012
© Diodes Incorporated
A Product Line of
Diodes Incorporated
FCX558
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
FCX558
Datasheet Number: DS33059 Rev. 4 - 2
6 of 6
www.diodes.com
November 2012
© Diodes Incorporated