DUP412VP5 QUAD SURFACE MOUNT TVS ARRAY Features Mechanical Data • • • • • • • • • Quad TVS in Common Anode Configuration Ultra-Small Surface Mount Package Ideal For Transient Suppression and ESD Protection Low Capacitance, <10pF @ VR = 0V Lead Free By Design/RoHS Compliant (Note 1) "Green Device" (Note 2) Qualified to AEC-Q101 Standards for High Reliability Case: SOT-953 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminal Finish: Matte Tin, Annealed Over Copper Leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.002 grams (approximate) • • • • • ESD Capability • • IEC 61000-4-2 Contact Method ±8kV IEC 61000-4-2 Air Discharge Method ±15kV K4 K3 4 5 D4 D3 D1 D2 1 K1 2 A1/A2 A3/A4 3 K2 Device Schematic Top View Thermal Characteristics Characteristic Peak Power Dissipation, 8x20μS Waveform (Note 5) Thermal Resistance, Junction-to-Ambient (Note 4) Operating and Storage Temperature Range Symbol Ppk RθJA TJ, TSTG Value 18 417 -55 to +150 Unit W °C/W °C Electrical Characteristics @TA = 25°C unless otherwise specified Type Number DUP412VP5 Notes: Marking Code V1 Leakage Current (Note 3) Breakdown Voltage (Note 3) Min (V) 11.4 VBR @ IT = 5mA Nom (V) Max (V) 12 12.7 IRM @ VRM (V) Max(μA) 0.5 9.0 Capacitance @0V Bias(pF) (Note 6) CT Typ Max 6.5 10 Capacitance @3V Bias(pF) (Note 6) CT Typ Max 3.5 5 1. No purposefully added lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Short duration pulse test used to minimize self-heating effect. 4. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. Suggested Pad Layout Document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 5. Non-repetitive current pulse per Figure 2 and derate above TA = 25°C per Figure 1. 6. Per element, f = 1MHz, TA = 25°C DUP412VP5 Document number: DS31642 Rev. 7 - 2 1 of 4 www.diodes.com July 2010 © Diodes Incorporated DUP412VP5 IPP, PEAK PULSE CURRENT (%Ipp) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 75 50 25 100 0 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Pulse Derating Curve 0 200 1 IR, INSTANTANEOUS REVERSE CURRENT (nA) IF, INSTANTANEOUS FORWARD CURRENT (A) 50 0.1 0.01 0.001 0.0001 0.4 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 3 Typical Forward Characteristics 20 40 t, TIME (μs) Fig. 2 Pulse Waveform 60 10 VR = 9V 8 6 4 2 0 -50 -25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 4 Instantaneous Reverse Current vs. Ambient Temperature 8 CT, TOTAL CAPACITANCE (pF) f = 1MHz 6 4 2 0 0 2 4 6 8 VR, REVERSE VOLTAGE (V) Fig. 5 Typical Total Capacitance vs. Reverse Voltage (Per Element) DUP412VP5 Document number: DS31642 Rev. 7 - 2 10 2 of 4 www.diodes.com July 2010 © Diodes Incorporated DUP412VP5 Ordering Information (Note 7) Part Number DUP412VP5-7 Notes: Case SOT-953 Packaging 10,000/Tape & Reel 7. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information V1 = Product type marking code V1 Package Outline Dimensions D e1 SOT-953 Dim Min Max Typ A 0.40 0.50 0.45 A1 0 0.05 − b 0.10 0.20 0.15 c 0.12 0.18 0.15 D 0.95 1.05 1.00 E 0.95 1.05 1.00 E1 0.75 0.85 0.80 e 0.35 − − e1 0.70 − − L 0.05 0.15 0.10 All Dimensions in mm L E E1 e b (5 places) c A A1 Suggested Pad Layout C C Dimensions Value (in mm) C 0.350 X 0.200 Y 0.200 Y1 1.100 Y1 Y (5X) X (5X) DUP412VP5 Document number: DS31642 Rev. 7 - 2 3 of 4 www.diodes.com July 2010 © Diodes Incorporated DUP412VP5 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com DUP412VP5 Document number: DS31642 Rev. 7 - 2 4 of 4 www.diodes.com July 2010 © Diodes Incorporated