SBR0240LP 0.2A SBR® SURFACE MOUNT SUPER BARRIER RECTIFIER Please click here to visit our online spice models database. NEW PRODUCT Features • • • • • • • • Mechanical Data • • Ultra Low Forward Voltage Drop Superior Reverse Avalanche Capability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) “Green” Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability • • • • • • Case: DFN1006-2 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminal Connections: Cathode Dot Terminals: Finish - NiPdAu over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.001 grams (approximate) Bottom View Top View Maximum Ratings @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current (See Figure 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM IO Value Unit 40 V 250 mA IFSM 5 A Symbol RθJA TJ, TSTG Value 270 -65 to +150 Unit ºC/W ºC Thermal Characteristics Characteristic Typical Thermal Resistance, Junction to Ambient TA = 25ºC (Note 3) Operating and Storage Temperature Range Electrical Characteristics Characteristic @TA = 25°C unless otherwise specified Symbol Min Forward Voltage Drop VF - Leakage Current (Note 2) IR - Notes: Typ Max Unit 0.15 0.22 0.29 0.41 0.49 0.47 0.21 0.28 0.35 0.49 0.59 0.56 V 0.5 0.6 10 µA Test Condition IF = 0.1mA, TJ = 25ºC IF = 1.0mA, TJ = 25ºC IF = 10mA, TJ = 25ºC IF = 100mA, TJ = 25ºC IF = 200mA, TJ = 25ºC IF = 200mA, TJ = 125ºC VR = 25V, TJ = 25ºC VR = 40V, TJ = 25ºC 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 2. Short duration pulse test used to minimize self-heating effect. 3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. SBR is a registered trademark of Diodes Incorporated. SBR0240LP Document number: DS31774 Rev. 3 - 2 1 of 4 www.diodes.com June 2009 © Diodes Incorporated SBR0240LP IF, INSTANTANEOUS FORWARD CURRENT (mA) PD, POWER DISSIPATION (W) 0.5 TJ=150°C 0.4 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8 IF(AV), AVERAGE FORWARD CURRENT (A) 1,000 100 10 1 0.1 0 200 400 600 800 1,000 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 2 Typical Forward Characteristics 1 1,000 1,000 CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (µA) Fig. 1 Forward Power Dissipation 100 10 1 0.1 100 10 1 0.01 0 5 10 15 20 25 30 35 40 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 0.1 TA, DERATED AMBIENT TEMPERATURE (°C) 0.25 IF(AV), AVERAGE FORWARD CURRENT(A) NEW PRODUCT 0.6 Note 3 0.2 0.15 0.1 0.05 0 150 125 100 75 50 25 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve 200 SBR is a registered trademark of Diodes Incorporated. SBR0240LP Document number: DS31774 Rev. 3 - 2 2 of 4 www.diodes.com 1 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 0 4 8 12 16 20 24 28 32 36 40 VR, DC REVERSE VOLTAGE (V) Fig. 6 Operating Temperature Derating June 2009 © Diodes Incorporated SBR0240LP Ordering Information (Note 3) Part Number SBR0240LP-7 Notes: Case DFN1006-2 Packaging 3000/Tape & Reel 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. NEW PRODUCT Marking Information 24= Product Type Marking Code Dot Denotes Cathode Side Package Outline Dimensions A A1 D R E b L DFN1006-2 Dim Min Max Typ A 0.47 0.53 0.50 A1 0 0.05 0.03 b 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e 0.40 L 0.20 0.30 0.25 R 0.05 0.15 0.10 All Dimensions in mm e Suggested Pad Layout C Dimensions Value (in mm) Z 1.1 G 0.3 X 0.7 Y 0.4 C 0.7 X Y G Z SBR is a registered trademark of Diodes Incorporated. SBR0240LP Document number: DS31774 Rev. 3 - 2 3 of 4 www.diodes.com June 2009 © Diodes Incorporated SBR0240LP IMPORTANT NOTICE NEW PRODUCT DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR0240LP Document number: DS31774 Rev. 3 - 2 4 of 4 www.diodes.com June 2009 © Diodes Incorporated