SBR05M60BLP 0.5A SBR® BRIDGE SUPER BARRIER RECTIFIER Features Mechanical Data • • • • • • • • • Ultra Low Leakage Current Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability 150ºC Operating Junction Temperature Lead Free Finish, RoHS Compliant (Note 1) “Green” Device (Note 3) Case: DFN3030-4 Case Material: Molded Plastic “Green” Molding Compound, UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – NiPdAu Over Copper Lead Frame, Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.02 grams (approximate) • • • • • • 1 4 1 2 3 2 4 3 Top View Pin Configuration Top View Device Schematic Maximum Ratings N/C @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (Per Diode) Symbol VRRM VRWM VRM IO Value Unit 60 V 500 mA IFSM 8 A Thermal Characteristics Characteristic Thermal Resistance Junction to Ambient Air (Note 2) Operating and Storage Temperature Range Electrical Characteristics Characteristic Symbol RθJA TJ, TSTG Max -55 to +150 Unit °C/W °C @TA = 25°C unless otherwise specified Symbol Min Forward Voltage (Per Diode) VF - Reverse Current (Note 4) (Per Diode) IR - Notes: Typ 215 Typ 0.43 0.40 Max 0.42 0.49 0.46 Unit 17 2.8 100 20 µA mA V Test Condition IF = 0.25A, TJ = 25ºC IF = 0.5A, TJ = 25ºC IF = 0.5A, TJ = 125ºC VR = 60V, TJ = 25ºC VR = 60V, TJ = 125ºC 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes. 2. Polymide PCB, 2 oz. copper; minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 3. Diodes Inc.’s “Green” policy can be found on our website at http://www.diodes.com/products/lead_free/index.php 4. Short duration pulse test used to minimize self-heating effect. SBR is a registered trademark of Diodes Incorporated. SBR05M60BLP Document number: DS31771 Rev. 2 - 2 1 of 4 www.diodes.com June 2010 © Diodes Incorporated SBR05M60BLP IF, INSTANTANEOUS FORWARD CURRENT (A) 0.9 PD, POWER DISSIPATION (W) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 TA = 150°C 0.1 T A = 125°C TA = 85°C TA = 25°C 0.01 0.001 0 0.5 1 1.5 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation 100 200 300 400 500 600 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 2 Typical Forward Characteristics 0.8 10,000 IF(AV), AVERAGE FORWARD CURRENT (A) IR, INSTANTANEOUS REVERSE CURRENT (µA) 0 1 TA = 150°C TA = 125°C 1,000 TA = 85°C 100 10 T A = 25°C 1 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 10 20 30 40 50 60 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 4 Forward Current Derating Curve 175 TA, AMBIENT TEMPERATURE (°C) 175 150 125 100 75 50 25 0 0 6 12 18 24 30 36 42 48 54 60 66 VR, DC REVERSE VOLTAGE (V) Fig. 5 Operating Temperature Derating SBR is a registered trademark of Diodes Incorporated. SBR05M60BLP Document number: DS31771 Rev. 2 - 2 2 of 4 www.diodes.com June 2010 © Diodes Incorporated SBR05M60BLP Ordering Information (Note 5) Part Number SBR05M60BLP-7 Notes: Case DFN3030-4 Packaging 3000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information DFN3030-4 5 6 = Product Type Marking Code YM = Date Code Marking Y = Year (ex: W = 2009) M = Month (ex: 9 = September) Date Code Key Year Code Month Code 2009 W Jan 1 2010 X Feb 2 N/C 2011 Y Mar 3 Apr 4 2012 Z May 5 Jun 6 2013 A Jul 7 Aug 8 2014 B Sep 9 Oct O 2015 C Nov N Dec D Package Outline Dimensions A3 A A1 Side View D e H D3 E3 E K J D1 E1 I E2 D2 M L Z b Bottom View SBR is a registered trademark of Diodes Incorporated. SBR05M60BLP Document number: DS31771 Rev. 2 - 2 3 of 4 www.diodes.com DFN3030-4 Dim Min Max Typ A 0.57 0.63 0.60 A1 0 0.05 0.02 A3 0.15 b 0.35 0.45 0.40 D 2.90 3.10 3.00 D1 1.075 1.275 1.175 D2 0.925 1.125 1.025 D3 1.075 1.275 1.175 E 2.90 3.10 3.00 e 1.30 E1 0.615 0.815 0.715 E2 1.78 1.98 1.88 E3 0.715 0.915 0.815 H 0.05 0.15 0.10 I 0.20 0.30 0.25 J 0.185 0.285 0.235 K 0.065 0.165 0.115 L 0.30 0.60 0.45 M 0.05 0.15 0.10 Z 0.65 All Dimensions in mm June 2010 © Diodes Incorporated SBR05M60BLP Suggested Pad Layout C Y3 G6 G4 Y2 X3 G1 G3 R Y G2 G5 Y1 X2 X1 G7 G8 X Dimensions C G1 G2 G3 G4 G5 G6 G7 G8 R X X1 X2 X3 Y Y1 Y2 Y3 Value (in mm) 1.300 0.100 0.150 0.830 0.115 0.135 0.170 0.500 0.500 0.150 0.500 1.375 1.225 1.175 1.980 1.015 0.715 0.650 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com SBR is a registered trademark of Diodes Incorporated. SBR05M60BLP Document number: DS31771 Rev. 2 - 2 4 of 4 www.diodes.com June 2010 © Diodes Incorporated