SBG3030CT - SBG3060CT 30A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features Schottky Barrier Chip Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 250A Peak For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Plastic Material: UL Flammability Classification Rating 94V-0 D2PAK E A 4 2 Dim Min Max H A 9.65 10.69 B 14.60 15.88 C 0.51 1.14 D 2.29 2.79 J B 1 G 3 M Mechanical Data D K C Case: D PAK Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Marking: Type Number Weight: 1.7 grams (approx.) Mounting Position: Any 2 L PIN 1 PIN 2 & 4 PIN 3 E 4.37 4.83 G 1.14 1.40 H 1.14 1.40 J 8.25 9.25 K 0.30 0.64 L 2.03 2.92 M 2.29 2.79 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol SBG 3030CT SBG 3040CT SBG 3045CT SBG 3050CT SBG 3060CT Unit VRRM VRWM VR 30 40 45 50 60 V VR(RMS) 21 28 32 35 42 V IO 30 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 250 A Forward Voltage, per Element @ IF = 15A, TC = 25C VFM Peak Reverse Current at Rated DC Blocking Voltage @ TC = 25C @ TC = 100C Average Rectified Output Current @ TC = 100C Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Case (Note 1) Operating and Storage Temperature Range Notes: 0.55 0.70 V IRM 1.0 75 Cj 420 pF RJC 1.5 K/W Tj, TSTG -65 to +150 C mA 1. Thermal resistance: junction to case mounted on heat sink. 2. Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC. DS30025 Rev. C-2 1 of 2 SBG3030CT - SBG3060CT IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE RECTIFIED CURRENT (A) 30 24 18 12 6 0 0 50 100 SBG3030CT-SBG3045CT SBG3050CT-SBG3060CT 10 1.0 Tj = 25°C IF Pulse Width = 300µs 0.1 0.2 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Derating Curve 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1000 300 8.3 ms single half-sine-wave JEDEC method 250 Cj, JUNCTION CAPACITANCE (pF) IFSM, PEAK FORWARD CURRENT (A) 100 200 150 100 50 100 Tj = 25°C f = 1.0MHz 10 0 1 10 0.1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current DS30025 Rev. C-2 1.0 2 of 2 SBG3030CT - SBG3060CT