DDA (LO-R1) U PNP PRE-BIASED SMALL SIGNAL DUAL SURFACE MOUNT TRANSISTOR Features • • • • • Epitaxial Planar Die Construction Complementary NPN Types Available (DDC) Built-In Biasing Resistors Lead-Free/RoHS Compliant (Note 3) "Green" Device (Note 4 and 5) A SOT-363 B C Mechanical Data • • • • • • • • • • Case: SOT-363 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Terminal Connections: See Diagram Marking Information: See Page 3 Type Code: See Table Below Ordering Information: See Page 3 Weight: 0.0058 grams (approximate) H K M J D F R1 (NOM) 0.22K 0.47K 0.22K 0.47K R2 (NOM) 10K 10K OPEN OPEN Min Max A 0.10 0.30 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal F 0.30 0.40 H 1.80 2.20 J ⎯ 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.25 α 0° 8° All Dimensions in mm 6 P/N DDA122LU DDA142JU DDA122TU DDA142TU L Dim 5 4 6 R1 R 2 Type Code P81 P82 P83 P84 2 4 R1 R2 R1 1 5 R1 1 3 R1, R2 2 3 R1 Only SCHEMATIC DIAGRAM Maximum Ratings NPN Section @TA = 25°C unless otherwise specified Characteristic Supply Voltage (1) to (6) and (4) to (3) Input Voltage (1) to (2) and (4) to (5) Input Voltage (1) to (2) and (4) to (5) Output Current DDA122LU DDA142JU DDA122TU DDA142TU All Symbol Value Unit VCC V VIN -50 +5 to -6 +5 to -6 VEBO (MAX) -5 V IC -100 mA Power Dissipation (Note 2) Thermal Resistance, Junction to Ambient Air (Note 2) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. V Pd 200 mW RθJA 625 °C/W Tj, TSTG -55 to +150 °C Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. 150mW per element must not be exceeded. No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Product manufactured with Date Code UO (week 40, 2007) and newer are built with Green Molding Compound. Product manufactured prior to Date Code UO are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30423 Rev. 7 - 2 1 of 3 www.diodes.com DDA (LO-R1) U © Diodes Incorporated Electrical Characteristics Characteristic Input Voltage Symbol Min Typ Max Unit DDA122LU DDA142JU Vl(off) -0.3 -0.3 ⎯ ⎯ V VCC = -5V, IO = -100μA DDA122LU DDA142JU Vl(on) ⎯ ⎯ -2.0 -2.0 V VO = -0.3V, IO = -20mA VO = -0.3V, IO = -20mA VO(on) ⎯ ⎯ -0.3V V IO/Il = -5mA/-0.25mA Il ⎯ ⎯ -28 -13 mA VI = -5V IO(off) ⎯ ⎯ -0.5 μA VCC = -50V, VI = 0V Gl 56 56 ⎯ ⎯ ⎯ VO = -5V, IO = -10mA fT ⎯ 200 ⎯ Output Voltage DDA122LU DDA142JU Input Current Output Current DDA122LU DDA142JU DC Current Gain R1, R2 Types @TA = 25°C unless otherwise specified Gain-Bandwidth Product* Test Condition MHz VCE = -10V, IE = -5mA, f = 100MHz * Transistor - For Reference Only Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic R1 Only Types Symbol Min Typ Max Unit Collector-Base Breakdown Voltage BVCBO -50 ⎯ ⎯ V IC = -50μA Collector-Emitter Breakdown Voltage BVCEO -40 ⎯ ⎯ V IC = -1mA BVEBO -5 ⎯ ⎯ V IE = -50μA IE = -50μA ICBO ⎯ ⎯ -0.5 μA VCB = -50V IEBO ⎯ ⎯ ⎯ -0.5 -0.5 μA VEB = -4V Emitter-Base Breakdown Voltage DDA122TU DDA142TU Collector Cutoff Current DDA122TU DDA142TU Emitter Cutoff Current Collector-Emitter Saturation Voltage DC Current Transfer Ratio Gain-Bandwidth Product* DDA122TU DDA142TU Test Condition VCE(sat) ⎯ ⎯ -0.3 V IC = -5mA, IB = -0.25mA hFE 100 100 250 250 600 600 ⎯ IC = -1mA, VCE = -5V fT ⎯ 200 ⎯ MHz VCE = -10V, IE = 5mA, f = 100MHz * Transistor - For Reference Only Pd, POWER DISSIPATION (mW) 250 200 150 100 50 RθJA = 625°C/W 0 -50 150 0 50 100 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Derating Curve (150mW per element must not be exceeded) DS30423 Rev. 7 - 2 2 of 3 www.diodes.com DDA (LO-R1) U © Diodes Incorporated Ordering Information (Note 6) Notes: Device Packaging Shipping DDA122LU-7-F SOT-363 3000/Tape & Reel DDA142JU-7-F SOT-363 3000/Tape & Reel DDA122TU-7-F SOT-363 3000/Tape & Reel DDA142TU-7-F SOT-363 3000/Tape & Reel 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information Pxx = Product Type Marking Code See Page 1 Diagrams YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September PXX YM PXX YM Date Code Key Year Code 2006 T 2007 U 2008 V 2009 W 2010 X 2011 Y 2012 Z Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30423 Rev. 7 - 2 3 of 3 www.diodes.com DDA (LO-R1) U © Diodes Incorporated