DDTA (LO-R1) U PNP PRE-BIASED 100 mA SURFACE MOUNT TRANSISTOR NEW PRO P RO D UC UCT Features • • • • • Epitaxial Planar Die Construction Complementary NPN Types Available (DDTC) Built-In Biasing Resistors Lead Free/RoHS Compliant (Note 2) "Green" Device (Note 3 & 4) A 3 2 Case: SOT-323 Case Material: Molded Plastic, "Green" Molding Compound, Note 4. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Terminal Connections: See Diagram Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe) Marking Information: See Table Below and Page 3 Ordering Information: See Page 3 Weight: 0.006 grams (approximate) • • • • • • • OUT Min Max A 0.25 0.40 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal G E 0.30 0.40 H G 1.20 1.40 H 1.80 2.20 J 0.0 0.10 K 0.90 1.00 B C Mechanical Data • • • SOT-323 Dim IN GND 1 K M J D L E OUT L 0.25 0.40 M 0.10 0.18 α 0° 8° All Dimensions in mm 3 C P/N DDTA122LU DDTA142JU DDTA122TU DDTA142TU R1 (NOM) 0.22KΩ 0.47KΩ 0.22KΩ 0.47KΩ R2 (NOM) 10KΩ 10KΩ OPEN OPEN B Type Code P81 P82 P83 P84 R1 IN B 1 C OUT 3 R2 2 E 1 E 2 GND (+) GND(+) IN Schematic and Pin Configuration Equivalent Inventer Circuit Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Supply Voltage, (3) to (2) Input Voltage, (1) to (2) Input Voltage, (2) to (1) Output Current DDTA122LU DDTA142JU DDTA122TU DDTA142TU Symbol Value Unit VCC V VIN -50 +5 to -6 +5 to -6 VEBO (MAX) -5 V V All IC -100 mA Power Dissipation (Note 1) Pd 200 mW Thermal Resistance, Junction to Ambient Air (Note 1) RθJA 625 °C/W Tj, TSTG -55 to +150 °C Operating and Storage Temperature Range Note: 1. 2. 3. 4. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Product manufactured with Date Code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to Date Code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30402 Rev. 6 - 2 1 of 3 www.diodes.com DDTA (LO-R1) U © Diodes Incorporated Electrical Characteristics Characteristic DDTA122LU DDTA142JU DDTA122LU DDTA142JU Input Voltage DDTA122LU DDTA142JU Output Current DDTA122LU DDTA142JU DC Current Gain Gain-Bandwidth Product* Symbol Min Typ Vl(off) -0.3 -0.3 Max Unit Test Condition ⎯ ⎯ V VCC = -5V, IO = -100μA V VO = -0.3V, IO = -20mA VO = -0.3V, IO = -20mA V IO/Il = -5mA/-0.25mA Vl(on) ⎯ ⎯ -2.0 -2.0 VO(on) ⎯ ⎯ Il ⎯ ⎯ mA VI = -5V IO(off) ⎯ μA VCC = -50V, VI = 0V Gl ⎯ 56 56 -0.3V -28 -13 -0.5 ⎯ ⎯ ⎯ VO = -5V, IO = -10mA fT ⎯ 200 ⎯ MHz VCE = -10V, IE = -5mA, f = 100MHz * Transistor - For Reference Only Electrical Characteristics Characteristic Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage DDTA122TU DDTA142TU Collector Cutoff Current DDTA122TU DDTA142TU Emitter Cutoff Current Collector-Emitter Saturation Voltage DDTA122TU DDTA142TU DC Current Transfer Ratio R1-Only Types @TA = 25°C unless otherwise specified Collector-Base Breakdown Voltage Gain-Bandwidth Product* Symbol Min Typ Max Unit BVCBO -50 ⎯ ⎯ V IC = -50μA Test Condition BVCEO -40 ⎯ ⎯ V IC = -1mA BVEBO -5 ⎯ ⎯ V IE = -50μA IE = -50μA ICBO ⎯ ⎯ -0.5 μA VCB = -50V IEBO ⎯ ⎯ ⎯ -0.5 -0.5 μA VEB = -4V VCE(sat) ⎯ ⎯ -0.3 V IC = -5mA, IB = -0.25mA hFE 100 100 250 250 600 600 ⎯ IC = -1mA, VCE = -5V fT ⎯ 200 ⎯ MHz VCE = -10V, IE = 5mA, f = 100MHz * Transistor - For Reference Only 250 Pd, POWER DISSIPATION (mW) NEW PRODUCT Output Voltage Input Current R1, R2 Types @TA = 25°C unless otherwise specified 200 150 100 50 0 -50 0 50 100 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Derating Curve DS30402 Rev. 6 - 2 2 of 3 www.diodes.com DDTA (LO-R1) U © Diodes Incorporated Notes: 5. Device Packaging Shipping DDTA122LU-7-F SOT-323 3000/Tape & Reel DDTA142JU-7-F SOT-323 3000/Tape & Reel DDTA122TU-7-F SOT-323 3000/Tape & Reel DDTA142TU-7-F SOT-323 3000/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information XXX Date Code Key Year XXX = Product Type Marking Code, See Table on Page 1 YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September YM NEW PRODUCT Ordering Information (Note 4 & 5) 2006 2007 2008 T U V Code 2009 W 2010 X Month Jan Feb Mar Apr May Jun Jul Code 1 2 3 4 5 6 7 Aug 8 2011 Y Sep 9 Oct O 2012 Z Nov N Dec D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30402 Rev. 6 - 2 3 of 3 www.diodes.com DDTA (LO-R1) U © Diodes Incorporated