PL IA NT CO M *R oH S Features Applications ■ RoHS compliant* ■ IEC 61000-4-2 ESD (Min. Level 4) ■ Surface Mount SMC package ■ IEC 61000-4-4 EFT ■ Standoff Voltage: 5.0 to 170 volts ■ IEC 61000-4-5 Surge ■ Power Dissipation: 1500 watts SMCJ Transient Voltage Suppressor Diode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 1500 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 200 Amps PM(AV) 5.0 Watts Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) VF (Note 5) Volts Operating Temperature Range TJ -55 to +150 °C TSTG -55 to +175 °C Steady State Power Dissipation @ TL = 75 °C Storage Temperature Range 1. 2. 3. 4. 5. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %. VF = 3.5 V on SMCJ5.0A through SMCJ90A and VF= 5.0 V on SMCJ100A through SMCJ170A. How to Order SMCJ 5.0 CA Package SMCJ = SMC/DO-214AB Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device SMCJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part Number Part Marking Bidirectional Device Part Number Part Marking SMCJ5.0A GDE SMCJ5.0CA BDE SMCJ6.0A GDG SMCJ6.0CA BDG SMCJ6.5A GDK SMCJ6.5CA BDK SMCJ7.0A GDM SMCJ7.0CA BDM SMCJ7.5A GDP SMCJ7.5CA BDP SMCJ8.0A GDR SMCJ8.0CA BDR SMCJ8.5A GDT SMCJ8.5CA BDT SMCJ9.0A GDV SMCJ9.0CA BDV SMCJ10A GDX SMCJ10CA BDX SMCJ11A GDZ SMCJ11CA BDZ SMCJ12A GEE SMCJ12CA BEE SMCJ13A GEG SMCJ13CA BEG SMCJ14A GEK SMCJ14CA BEK SMCJ15A GEM SMCJ15CA BEM SMCJ16A GEP SMCJ16CA BEP SMCJ17A GER SMCJ17CA BER SMCJ18A GET SMCJ18CA BET SMCJ20A GEV SMCJ20CA BEV SMCJ22A GEX SMCJ22CA BEX SMCJ24A GEZ SMCJ24CA BEZ SMCJ26A GFE SMCJ26CA BFE SMCJ28A GFG SMCJ28CA BFG SMCJ30A GFK SMCJ30CA BFK SMCJ33A GFM SMCJ33CA BFM SMCJ36A GFP SMCJ36CA BFP SMCJ40A GFR SMCJ40CA BFR SMCJ43A GFT SMCJ43CA BFT SMCJ45A GFV SMCJ45CA BFV SMCJ48A GFX SMCJ48CA BFX SMCJ51A GFZ SMCJ51CA BFZ SMCJ54A GGE SMCJ54CA BGE SMCJ58A GGG SMCJ58CA BGG SMCJ60A GGK SMCJ60CA BGK SMCJ64A GGM SMCJ64CA BGM SMCJ70A GGP SMCJ70CA BGP SMCJ75A GGR SMCJ75CA BGR SMCJ78A GGT SMCJ78CA BGT SMCJ85A GGV SMCJ85CA BGV SMCJ90A GGX SMCJ90CA BGX SMCJ100A GGZ SMCJ100CA BGZ SMCJ110A GHE SMCJ110CA BHE SMCJ120A GHG SMCJ120CA BHG SMCJ130A GHK SMCJ130CA BHK SMCJ150A GHM SMCJ150CA BHM SMCJ160A GHP SMCJ160CA BHP SMCJ170A GHR SMCJ170CA BHR Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Breakdown Voltage VBR (Volts) Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM Min. Max. @ IT (mA) VRWM (Volts) IR (μA) 6.4 6.67 7.22 7.78 8.33 8.89 9.44 10 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 50 53.3 56.7 60 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 7.23 7.67 8.3 8.95 9.58 10.2 10.8 11.5 12.8 14.4 15.3 16.5 17.9 19.2 20.5 21.7 23.3 25.5 28 30.7 32.2 35.8 38.3 42.2 46 51.1 54.9 57.5 61.3 65.2 69 74.6 76.7 81.8 89.5 95.8 99.7 108.2 115.5 128 140 153 165 192 205 217.5 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 1000 1000 500 200 100 50 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current VRSM (Volts) IRSM (Amps) 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 163 145.6 133.9 125 116.3 110.3 104.2 97.4 88.2 82.4 75.3 69.7 64.7 61.5 57.7 53.3 51.4 46.3 42.2 38.6 35.6 33 31 28.1 25.8 23.3 21.6 20.6 19.4 18.2 17.2 16 15.5 14.6 13.3 12.4 11.4 10.4 10.3 9.3 8.4 7.9 7.2 6.2 5.8 5.5 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine Wave of 8.3 ms Pulse Width. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMCJ Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension A (Max.) F H D B (Min.) E C (Min.) Dimension A B C D E F G H SMC (DO-214AB) 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.92 - 3.18 (0.115 - 0.125) 0.15 - 0.31 (0.006 - 0.112) 7.75 - 8.13 (0.305 - 0.320) 0.05 - 0.20 (0.002 - 0.008) 2.01 - 2.62 (0.080 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case ..........................................Molded plastic per UL Class 94V-0 Polarity ..................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device Weight ....................................................0.007 ounces / 0.21 grams SMCJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 200 100 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 10 0 25 0 50 75 100 125 150 175 1 200 2 5 Pulse Waveform 100 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP TA = 25 °C Unidirectional IRSM Half value= 2 Capacitance (pF) IP, Peak Pulse Current (%) 50 10000 Peak value (IRSM) 100 20 Typical Junction Capacitance TR=10 µs 1000 Bidirectional 100 0 0 0 1.0 2.0 3.0 0 4.0 10 Pulse Rating Curve 10 1.0 8.0 mm Lead Areas 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms 5.0 RM(AV) Steady State Power Dissipation (W) TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 1.0 µs 1000 Steady State Power Derating Curve 100 0.1 0.1 µs 100 Standoff Voltage (Volts) T, Time (ms) PP, Peak Power (KW) 10 Number of Cycles at 60 Hz Ambient Temperature ( °C) 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. CDDFN5-0504N TVS/Steering DiodeDiode Array Series SMCJ Transient -Voltage Suppressor Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer End ....... ....... C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: MM (INCHES) 10 pitches (min.) 10 pitches (min.) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- 02/10 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. SMC (DO-214AB) 7.22 ± 0.10 (0.284 - 0.004) 8.11 ± 0.10 (0.319 ± 0.004) 2.36 ± 0.10 (0.093 ± 0.004) 1.55 ± 0.05 (0.061 ± 0.002) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 7.50 ± 0.05 (0.295 ± 0.002) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 16.00 ± 0.20 (0.630 ± 0.008) 22.4 MAX. (0.882) 3,000