B130L Green 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Please click here to visit our online spice models database. Features • • • • • • Mechanical Data • • Low Forward Voltage Drop Guard Ring Die Construction for Transient Protection Ideally Suited for Automated Assembly Low Power Loss, High Efficiency Lead Free Finish, RoHS Compliant (Note 1) Green Molding Compound (No Halogen and Antimony) (Note 4) • • • • • • Top View Maximum Ratings Case: SMA Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.064 grams (approximate) Bottom View @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage @ IR = 1mA Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 105°C Peak Repetitive Forward Current (Note 2) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IO IFRM Value Unit 30 V 21 1.0 2.0 V A A IFSM 25 A Symbol RθJT TJ TSTG Value 27 -55 to +125 -55 to +150 Unit °C/W °C °C Thermal Characteristics Characteristic Typical Thermal Resistance Junction to Terminal Operating Temperature Range Storage Temperature Range Electrical Characteristics Characteristic Forward Voltage Drop @TA = 25°C unless otherwise specified Symbol VF Leakage Current (Note 3) IR Total Capacitance CT Notes: 1. 2. 3. 4. Min Typ Max Unit - - - - 0.41 0.35 0.47 0.43 V - - - - 0.4 12 1.0 25 mA - - 110 pF Test Condition IF = 1.0A, TJ = 25°C IF = 1.0A, TJ = 100°C IF = 2.0A, TJ = 25°C IF = 2.0A, TJ = 100°C VR = 15V, TA = 25°C VR = 15V, TA = 100°C VR = 30V, TA = 25°C VR = 30V, TA = 100°C VR = 4V, f = 1MHz EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/quality/lead_free.html. At Rated VR, Square Wave, 25KHz, TC = 40°C. Short duration pulse test used to minimize self-heating effect. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound. B130L Document number: DS30151 Rev. 8 - 2 1 of 4 www.diodes.com July 2009 © Diodes Incorporated IR, INSTANTANEOUS REVERSE CURRENT (mA) IF, INSTANTANEOUS FORWARD CURRENT (A) B130L 10 TJ = 125°C T J = -40°C TJ = 100°C 1.0 TJ = 25°C T J = 85°C 0.1 0 10 1 .1 .01 .001 0.3 0.4 0.1 0.2 0.5 0.6 0.7 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics 0 10 30 20 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics 1,000 2.5 IO, AVERAGE RECTIFIED CURRENT (A) f = 1MHz CT, TOTAL CAPACITANCE (pF) 100 TJ = 25°C 100 10 2.0 1.5 1.0 0.5 TJ = 125°C 0 1.0 0 10 20 15 25 30 35 40 VR, DC REVERSE VOLTAGE (V) Fig. 3 Total Capacitance vs. Reverse Voltage 5.0 0 25 50 75 100 125 TC, CASE TEMPERATURE (°C) Fig. 4 Forward Current Derating Curve 150 IFSM, PEAK FORWARD SURGE CURRENT (A) 25 20 15 10 5 0 1 10 100 NUMBER OF CYCLES AT 60Hz Fig. 5 Max Non-Repetitive Peak Forward Surge Current B130L Document number: DS30151 Rev. 8 - 2 2 of 4 www.diodes.com July 2009 © Diodes Incorporated B130L Ordering Information (Note 5) Part Number B130L-13-F Notes: Case SMA Packaging 5000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information B130L = Product type marking code = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 6 for 2006 WW = Week code 01 to 52 YWW B130L Package Outline Dimensions B A C D J H SMA Dim Min Max A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 E 4.80 5.59 G 0.05 0.20 H 0.76 1.52 J 2.01 2.30 All Dimensions in mm G E Suggested Pad Layout Dimensions Value (in mm) Z 6.5 G 1.5 X 1.7 Y 2.5 C 4.0 B130L Document number: DS30151 Rev. 8 - 2 3 of 4 www.diodes.com July 2009 © Diodes Incorporated B130L IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com B130L Document number: DS30151 Rev. 8 - 2 4 of 4 www.diodes.com July 2009 © Diodes Incorporated