LT1501G - LT1507G 1.5A GLASS PASSIVATED RECTIFIER INACTIVE, NOT FOR NEW DESIGN, USE 1N5391G - 1N5399G Features Glass Passivated Die Construction Diffused Junction High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 50A Peak Low Reverse Leakage Current Plastic Material - UL Flammability Classification 94V-0 · · · · · · B A DO-15 Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Weight: 0.4 grams (approx) Mounting Position: Any Marking: Type Number · · · · C D Mechanical Data · · A Dim Min Max A 25.40 — B 5.50 7.62 C 0.686 0.889 D 2.60 3.6 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol LT15 01G LT15 02G LT15 03G LT15 04G LT15 05G LT15 06G LT15 07G Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage @ IF = 1.5A IO 1.5 A IFSM 50 A VFM 1.1 V Peak Reverse Current at Rated DC Blocking Voltage IRM 5.0 200 µA I2t 10.4 A2s I2t @TA = 25°C @ TA = 100°C Rating for Fusing (t < 8.3ms) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: Cj 15 pF RqJA 80 K/W Tj, TSTG -65 to +175 °C 1. Valid provided that leads are kept at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. DS29005 Rev. B-3 1 of 2 LT1501G-LT1507G IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 10 1.5 1.2 0.9 0.6 0.3 0 40 60 80 100 120 140 160 180 1.0 0.1 Tj = 25ºC PULSE WIDTH = 300µs 2% DUTY CYCLE 0.01 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TA, AMBIENT TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 50 100 40 Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.4 30 20 10 10 8.3ms Single half sine-wave JEDEC Method 0 1 Tj = 25°C f = 1 MHz 1.0 100 10 1.0 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100 IR, INSTANTANEOUS REVERSE CURRENT (µA) 1000 100 Tj = 150°C 10 Tj = 125°C 1.0 0.1 0.01 INACTIVE, NOT FOR NEW DESIGN, USE 1N5391G - 1N5399G Tj = 25°C 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS29005 Rev. B-3 2 of 2 LT1501G-LT1507G