MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type APPLICATIONS Where steep pulses occur e.g. SMPS (switch mode power supplies). Electronic lighting e.g. Ballast. Motor control circuits. S - correction. For flyback applications please use 1400 V series. For hot asphalt encapsulation process. 168x12(halfpage) w l h MARKING h h' F' (1) F lt C-value; tolerance; rated voltage; code for dielectric material; code for factory of origin; manufacturer’s type designation; manufacturer; year and week of manufacture w l P Ødt H Ødt 10 15 Dimensions in mm. (1) ⎪F − F’⎪ < 0.3 mm. F = 7.5 +0.6/−0.1 mm. DIELECTRIC Polypropylene film ELECTRODES CLIMATIC CATEGORY Metallized film 55/105/56 ENCAPSULATION RATED (DC) TEMPERATURE Flame retardant plastic case and epoxy resin (UL-class 94 V-0) 85 °C RATED (AC) TEMPERATURE CONSTRUCTION 105 °C Internal serial construction MAXIMUM APPLICATION TEMPERATURE LEADS e3 Tinned wire 105 °C REFERENCE SPECIFICATIONS CAPACITANCE RANGE (E24 SERIES): 0.001 to 2.7 µF IEC 60384-17 PERFORMANCE GRADE CAPACITANCE TOLERANCE: ±5% Grade 1 (long life) STABILITY GRADE RATED (DC) VOLTAGE Grade 2 250 V; 400 V; 630 V; 1000 V; 1400 V;1600 V; 2000 V; 2500 V RATED (AC) VOLTAGE 125 V; 200 V; 220 V; 350 V; 500 V; 550 V; 700 V; 900 V FEATURES 7.5 mm bent back pitch. 15 to 27.5 mm lead pitch. Low contact resistance. Low loss dielectric. Small dimensions for high density packaging. Supplied loose in box and taped on reel RATED PEAK-TO-PEAK VOLTAGE Lead (Pb)-free product 350 V; 560 V; 630 V; 1000 V; 1400 V; 1600 V; 2000 V; 2500 V DETAIL SPECIFICATION For more detailed data and test requirements contact: [email protected] Document Number: 28124 Revision: 28-Feb-05 For technical questions contact: [email protected] www.vishay.com 201 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES 15.0/7.5 mm 383 MULTIPLIER (nF) CAPACITANCE (numerically) 15.0 mm 22.5 mm 27.5 mm 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 2222 383 XX XX X TYPE PACKAGING LEAD CONFIGURATION 383 loose in box taped on reel (bent back) lead length 3.5 mm H = 16.0 mm; P0 = 15.0 mm reel diameter = 500 mm PREFERRED TYPES C-TOL 250 V ±5% 00 03 10 20 30 40 50 60 70 13 23 33 43 53 63 − dimensions relating to this code should remain in Parenthesis 01 04 02 05 11 21 31 41 51 61 71 14 24 34 44 54 64 74 12 22 32 42 52 62 72 15 25 35 45 55 65 − dimensions relating to this code should remain in Parenthesis − − − 46 56 66 − ±5% 400 V 630 V 1000 V 1400 V 1600 V 2000 V 2500 V ON REQUEST loose in box 383 taped on reel taped on reel (bent back) taped on reel (bent back) lead length 5.0 mm lead length 25.0 mm H = 18.5 mm; P0 = 12.7 mm H = 16.0 mm; P0 = 15.0 mm reel diameter = 356 mm H = 16.0 mm; P0 = 15.0 mm reel diameter = 356 mm for hot asphalt encapsulation ±5% ±5% ±5% ±5% − ±5% dimensions relating to this code should remain in Parenthesis SPECIFIC REFERENCE DATA (250 VDC) DESCRIPTION Tangent of loss angle: C ≤ 0.15 µF 0.15 µF < C ≤ 0.39 µF 0.39 µF < C ≤ 0.56 µF 0.56 µF < C ≤ 0.82 µF 0.82 µF < C ≤ 1.2 µF 1.2 µF < C ≤ 1.8 µF 1.8 µF < C ≤ 2.2 µF 2.2 µF < C ≤ 2.7 µF Rated voltage pulse slope (dU/dt)R: P = 15.0 mm and 7.5 mm (bent back), for C ≤ 0.15 µF P = 15.0 mm and 7.5 mm (bent back),for 0.15 µF < C ≤ 0.39 µF P = 22.5 mm P = 27.5 mm, for 0.82 µF < C ≤ 2 µF P = 27.5 mm, for 2 µF < C ≤ 2.7 µF R between leads, for C ≤ 1 µF at 100 V; 1 minute RC between leads, for C >1 µF at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case www.vishay.com 202 VALUE at 10 kHz ≤5 × 10−4 ≤5 × 10−4 ≤10 × 10−4 ≤10 × 10−4 ≤10 × 10−4 ≤15 × 10−4 ≤15 × 10−4 ≤15 × 10−4 For technical questions contact: [email protected] at 100 kHz ≤20 × 10−4 ≤25 × 10−4 ≤45 × 10−4 ≤50 × 10−4 ≤65 × 10−4 ≤75 × 10−4 ≤85 × 10−4 ≤95 × 10−4 450 V/µs 900 V/µs 290 V/µs 190 V/µs 130 V/µs >100000 MΩ >100000 s >30000 MΩ >220 V 400 V; 1 minute 2840 V; 1 minute Document Number: 28124 Revision: 28-Feb-05 MMKP 383 AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type Vishay BCcomponents URdc = 250 V; URac = 125 V/Up-p = 350 V CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm last 5 digits of catalog number 5.0 × 11.0 (13.0) × 17.5 1.2 00913 1000 1100 03913 00104 03104 0.11 00114 03114 0.12 00124 6.0 × 12.0 (14.0) × 17.5 1.5 00134 1000 1000 900 03124 03134 0.15 00154 03154 0.16 00164 03164 0.18 7.0 × 13.5 (15.5) × 17.5 2.0 0.2 00184 750 500 800 00204 03184 00224 03224 0.24 00244 03244 8.5 × 15.0 (17.0) × 17.5 2.7 00274 0.3 00304 0.33 00334 0.36 10.0 × 16.5 (18.5) × 17.5 3.3 00364 750 500 7.0 × 16.5 × 26.0 3.5 0.56 8.5 × 18.0 × 26.0 4.8 0.62 00514 00564 6.0 00754 300 450 600 03364 500 250 03394 200 250 550 200 250 450 200 200 350 pitch = 27.5 mm pitch = 7.5 mm (bent back) 00914 00105 11.0 × 21.0 × 31.0 8.4 00115 100 125 100 125 100 125 100 100 00125 1.2 1.3 00135 13.0 × 23.0 × 31.0 11.0 1.6 00155 00165 15.0 × 25.0 × 31.0 13.6 18.0 × 28.0 × 31.0 18.5 00185 00205 00225 2.2 2.4 550 00824 1.0 2.0 03274 pitch = 22.5 mm pitch = 7.5 mm (bent back) 00434 0.91 1.8 400 03334 500 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 1.5 700 00684 10.0 × 19.5 × 26.0 0.82 1.1 450 00624 0.68 0.75 800 00474 0.47 0.51 550 03304 Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.43 650 00394 0.39 950 03204 0.22 0.27 SPQ 03823 1250 0.1 0.13 SPQ pitch = 15.0 mm pitch = 7.5 mm (bent back) 00823 0.082 0.091 SPQ ∅ 356 mm 2.7 Document Number: 28124 Revision: 28-Feb-05 00245 00275 For technical questions contact: [email protected] www.vishay.com 203 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type SPECIFIC REFERENCE DATA (400 VDC) DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz ≤5 × 10−4 ≤20 × 10−4 ≤10 × 10−4 ≤35 × 10−4 ≤10 × 10−4 ≤40 × 10−4 ≤10 × 10−4 ≤50 × 10−4 ≤10 × 10−4 ≤55 × 10−4 ≤10 × 10−4 ≤60 × 10−4 ≤10 × 10−4 ≤65 × 10−4 C ≤ 0.22 µF 0.22 µF < C ≤ 0.33 µF 0.33 µF < C ≤ 0.43 µF 0.43 µF < C ≤ 0.68 µF 0.68 µF < C ≤ 0.82 µF 0.82 µF < C ≤ 1.2 µF 1.2 µF < C ≤ 1.5 µF Rated voltage pulse slope (dU/dt)R: P = 15.0 mm and 7.5 mm (bent back), C ≤ 0.082 µF 600 V/µs P = 15.0 mm and 7.5 mm (bent back), 0.082 µF < C ≤ 0.22 µF 1200 V/µs P = 22.5 mm 410 V/µs P = 27.5 mm; for 0.43 µF < C ≤ 1.1 µF 260 V/µs P = 27.5 mm; for 1.1 µF < C ≤ 1.5 µF 180 V/µs R between leads, for C ≤ 1 µF at 100 V; 1 minute >100000 MΩ RC between leads, for C >1 µF at 100 V; 1 minute >100000 s R between leads and case; 100 V; 1 minute >30000 MΩ >220 V Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 560 V; 1 minute Withstanding (DC) voltage between leads and case 2840 V; 1 minute URdc = 400 V; URac = 200 V/Up-p = 560 V CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm last 5 digits of catalog number 5.0 × 11.0 (13.0) × 17.5 1.2 10513 1000 1100 13513 10563 13563 0.062 10623 13623 0.068 10683 6.0 × 12.0 (14.0) × 17.5 1.5 10753 1000 1000 900 13683 13753 0.082 10823 13823 0.091 10913 13913 0.1 7.0 × 13.5 (15.5) × 17.5 2.0 0.11 10104 750 500 800 10114 13104 10124 13124 0.13 10134 13134 8.5 × 15.0 (17.0) × 17.5 2.7 10154 0.16 10164 0.18 10184 0.2 10.0 × 16.5 (18.5) × 17.5 0.22 www.vishay.com 204 3.3 10204 950 550 800 450 700 400 550 300 500 250 13114 0.12 0.15 SPQ 13473 1250 0.056 0.075 SPQ pitch = 15.0 mm pitch = 7.5 mm (bent back) 10473 0.047 0.051 SPQ ∅ 356 mm 750 500 650 13154 13164 13184 500 450 600 10224 For technical questions contact: [email protected] 13204 13224 Document Number: 28124 Revision: 28-Feb-05 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.24 7.0 × 16.5 × 26.0 3.5 8.5 × 18.0 × 26.0 4.8 0.36 pitch = 22.5 mm pitch = 7.5 mm (bent back) 10244 200 250 550 10304 200 250 450 200 200 350 10364 10.0 × 19.5 × 26.0 6.0 0.43 10394 10434 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm pitch = 27.5 mm pitch = 7.5 mm (bent back) 0.47 10474 0.51 10514 0.56 11.0 × 21.0 × 31.0 8.4 0.62 11.0 125 10754 100 125 100 125 100 100 10824 0.91 10914 15.0 × 25.0 × 31.0 13.6 1.1 10105 10115 10125 1.2 1.3 100 10684 13.0 × 23.0 × 31.0 0.82 1 10564 10624 0.68 0.75 SPQ 10334 0.33 0.39 SPQ 10274 0.27 0.3 last 5 digits of catalog number SPQ ∅ 356 mm 18.0 × 28.0 × 31.0 18.5 10135 10155 1.5 SPECIFIC REFERENCE DATA (630 VDC) DESCRIPTION Tangent of loss angle: C ≤ 0.15 µF 0.15 µF < C ≤ 0.22 µF 0.22 µF < C ≤ 0.3 µF 0.3 µF < C ≤ 0.47 µF 0.47 µF < C ≤ 0.68 µF 0.68 µF < C ≤ 1.0 µF Rated voltage pulse slope (dU/dt)R: P = 15.0 mm and 7.5 mm (bent back), C ≤ 0.056 µF P = 15.0 mm and 7.5 mm (bent back), 0.056 µF < C ≤ 0.15 µF P = 22.5 mm P = 27.5 mm, for 0.3 µF < C ≤ 0.75 µF P = 27.5 mm, for 0.75 µF < C ≤ 1 µF R between leads, for C ≤ 1 µF at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Document Number: 28124 Revision: 28-Feb-05 VALUE at 10 kHz ≤5 × 10−4 ≤8 × 10−4 ≤8 × 10−4 ≤10 × 10−4 ≤10 × 10−4 ≤10 × 10−4 For technical questions contact: [email protected] at 100 kHz ≤15 × 10−4 ≤25 × 10−4 ≤30 × 10−4 ≤40 × 10−4 ≤45 × 10−4 ≤50 × 10−4 700 V/µs 1400 V/µs 470 V/µs 300 V/µs 210 V/µs >100000 MΩ >30000 MΩ >250 V 1000 V; 1 minute 2840 V; 1 minute www.vishay.com 205 MMKP 383 Vishay BCcomponents URdc = 630 V; URac = 220 V/Up-p = 630 V AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.03 0.033 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 5.0 × 11.0 (13.0) × 17.5 1.2 6.0 × 12.0 (14.0) × 17.5 1.5 7.0 × 13.5 (15.5) × 17.5 2.0 8.5 × 15.0 (17.0) × 17.5 2.7 10.0 × 16.5 (18.5) × 17.5 3.3 8.5 × 18.0 × 26.0 4.8 10.0 × 19.5 × 26.0 6.0 1250 1000 1100 1000 1000 900 750 500 800 750 500 650 500 450 600 11.0 × 21.0 × 31.0 8.4 13.0 × 23.0 × 31.0 11.0 15.0 × 25.0 × 31.0 13.6 18.0 × 28.0 × 31.0 18.5 www.vishay.com 206 SPQ SPQ 23303 23333 23363 23393 23433 23473 23513 23563 23623 23683 23753 23823 23913 23104 23114 23124 23134 23154 950 550 800 450 700 400 550 300 500 250 pitch = 22.5 mm pitch = 7.5 mm (bent back) 20164 20184 20204 20224 20244 20274 20304 200 250 450 200 200 350 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.33 0.36 0.39 0.43 0.47 0.51 0.56 0.62 0.68 0.75 0.82 0.91 1 ∅ 356 mm pitch = 15.0 mm pitch = 7.5 mm (bent back) 20303 20333 20363 20393 20433 20473 20513 20563 20623 20683 20753 20823 20913 20104 20114 20124 20134 20154 Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.16 0.18 0.2 0.22 0.24 0.27 0.3 SPQ last 5 digits of catalog number pitch = 27.5 mm pitch = 7.5 mm (bent back) 20334 20364 20394 20434 20474 20514 20564 20624 20684 20754 20824 20914 20105 100 125 100 125 100 125 100 100 For technical questions contact: [email protected] Document Number: 28124 Revision: 28-Feb-05 MMKP 383 AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type Vishay BCcomponents SPECIFIC REFERENCE DATA (1000 VDC) DESCRIPTION VALUE Tangent of loss angle: C ≤ 0.062 µF 0.062 µF < C ≤ 0.13 µF 0.13 µF < C ≤ 0.22 µF 0.22 µF < C ≤ 0.33 µF 0.33 µF < C ≤ 0.47 µF Rated voltage pulse slope (dU/dt)R: P = 15.0 mm and 7.5 mm (bent back), C ≤ 0.024 µF P = 15.0 mm and 7.5 mm (bent back), 0.024 µF < C ≤ 0.062 µF P = 22.5 mm P = 27.5 mm, for 0.13 µF < C ≤ 0.33 µF P = 27.5 mm, for 0.33 µF < C ≤ 0.47 µF R between leads, for C ≤ 1 µF at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz ≤5 × 10−4 ≤6 × 10−4 ≤8 × 10−4 ≤8 × 10−4 ≤8 × 10−4 at 100 kHz ≤15 × 10−4 ≤20 × 10−4 ≤25 × 10−4 ≤30 × 10−4 ≤35 × 10−4 1700 V/µs 3300 V/µs 1200 V/µs 700 V/µs 470 V/µs >100000 MΩ >30000 MΩ >440 V 1600 V; 1 minute 2840 V; 1 minute URdc = 1000 V; URac = 350 V/Up-p = 1000 V CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.010 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 0.03 0.033 5.0 × 11.0 (13.0) × 17.5 1.2 6.0 × 12.0 (14.0) × 17.5 1.5 7.0 × 13.5 (15.5) × 17.5 2.0 Document Number: 28124 Revision: 28-Feb-05 SPQ last 5 digits of catalog number ∅ 356 mm SPQ SPQ pitch = 15.0 mm pitch = 7.5 mm (bent back) 30432 30472 30512 30562 30622 30682 30752 30822 30912 30103 30113 30123 30133 30153 30163 30183 30203 30223 30243 30273 30303 30333 1250 1000 1100 1000 1000 900 750 500 800 For technical questions contact: [email protected] 33432 33472 33512 33562 33622 33682 33752 33822 33912 33103 33113 33123 33133 33153 33163 33183 33203 33223 33243 33273 33303 33333 950 550 800 450 700 400 www.vishay.com 207 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number 0.036 0.039 0.043 0.047 0.051 0.056 0.062 8.5 × 15.0 (17.0) × 17.5 2.7 10.0 × 16.5 (18.5) × 17.5 3.3 30363 30393 30433 30473 30513 30563 30623 SPQ SPQ 750 500 650 500 450 600 Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 7.0 × 16.5 × 26.0 3.5 8.5 × 18.0 × 26.0 4.8 10.0 × 19.5 × 26.0 6.0 11.0 × 21.0 × 31.0 8.4 13.0 × 23.0 × 31.0 11.0 15.0 × 25.0 × 31.0 13.6 18.0 × 28.0 × 31.0 18.5 www.vishay.com 208 33363 33393 33433 33473 33513 33563 33623 ∅ 356 mm SPQ SPQ 550 300 500 250 pitch = 22.5 mm pitch = 7.5 mm (bent back) 30683 30753 30823 30913 30104 30114 30124 30134 200 250 550 200 250 450 200 200 350 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.15 0.16 0.18 0.2 0.22 0.24 0.27 0.3 0.33 0.36 0.39 0.43 0.47 SPQ last 5 digits of catalog number pitch = 27.5 mm pitch = 7.5 mm (bent back) 30154 30164 30184 30204 30224 30244 30274 30304 30334 30364 30394 30434 30474 100 125 100 125 100 125 100 100 For technical questions contact: [email protected] Document Number: 28124 Revision: 28-Feb-05 MMKP 383 AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type Vishay BCcomponents SPECIFIC REFERENCE DATA (1400 VDC) DESCRIPTION VALUE Tangent of loss angle: C ≤ 0.016 µF 0.016 µF < C ≤ 0.039 µF 0.039 µF < C ≤ 0.13 µF Rated voltage pulse slope (dU/dt)R: P = 15.0 mm and 7.5 mm (bent back), for C ≤ 0.0056 µF P = 15.0 mm and 7.5 mm (bent back), for 0.0056 µF < C ≤ 0.016 µF P = 22.5 mm P = 27.5 mm, for 0.039 µF < C ≤ 0.1 µF P = 27.5 mm, for 0.1 µF < C ≤ 0.13 µF R between leads, for C ≤ 1 µF at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz ≤5 × 10−4 ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4 ≤20 × 10−4 8000 V/µs 15000 V/µs 4000 V/µs 2100 V/µs 1500 V/µs >100000 MΩ >30000 MΩ >500 V 2250 V; 1 minute 2840 V; 1 minute URdc = 1400 V; URac = 500 V/Up-p = 1400 V (standard) CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.0022 0.0024 0.0027 5.0 × 11.0 (13.0) × 17.5 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 6.0 × 12.0 (14.0) × 17.5 0.0051 0.0056 0.0062 0.0068 7.0 × 13.5 (15.5) × 17.5 0.0075 0.0082 0.0091 0.01 8.5 × 15.0 (17.0) × 17.5 0.011 0.012 0.013 0.015 10.0 × 16.5 (18.5) × 17.5 0.016 1.2 1.5 2.0 2.7 3.3 7.0 × 16.5 × 26.0 Document Number: 28124 Revision: 28-Feb-05 3.5 ∅ 356 mm SPQ SPQ pitch = 15.0 mm pitch = 7.5 mm (bent back) 40222 40242 40272 40302 40332 40362 40392 40432 40472 40512 40562 40622 40682 40752 40822 40912 40103 40113 40123 40133 40153 40163 1250 1000 1100 1000 1000 900 750 500 800 750 500 650 500 450 600 Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.018 0.02 SPQ last 5 digits of catalog number 43222 43242 43272 43302 43332 43362 43392 43432 43472 43512 43562 43622 43682 43752 43822 43912 43103 43113 43123 43133 43153 43163 950 550 800 450 700 400 550 300 500 250 pitch = 22.5 mm pitch = 7.5 mm (bent back) 40183 40203 200 250 550 For technical questions contact: [email protected] www.vishay.com 209 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number 0.022 0.024 0.027 0.03 0.033 0.036 0.039 8.5 × 18.0 × 26.0 4.8 10.0 × 19.5 × 26.0 6.0 40223 40243 40273 40303 40333 40363 40393 SPQ SPQ SPQ 200 250 450 200 200 350 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 11.0 × 21.0 × 31.0 8.4 13.0 × 23.0 × 31.0 11.0 15.0 × 25.0 × 31.0 13.6 18.0 × 28.0 × 31.0 11.0 last 5 digits of catalog number ∅ 356 mm SPQ SPQ pitch = 27.5 mm pitch = 7.5 mm (bent back) 40433 40473 40513 40563 40623 40683 40753 40823 40913 40104 40114 40124 40134 100 125 100 125 100 125 100 100 URdc = 1400 V; URac = 500 V/Up-p = 1400 V (hot asphalt encapsulation) CATALOG NUMBER 2222 383 ..... AND PACKAGING C (µF) DIMENSIONS w × h (h’) × l (mm) REEL; ∅ 356 mm MASS (g) C-tol = ±5% last 5 digits of catalog number SPQ Pitch = 15.0 ±0.4 mm; (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm 0.0022 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 6.0 × 12.0 (14.0) × 17.5 1.5 7.0 × 13.5 (15.5) × 17.5 2.0 www.vishay.com 210 46222 46242 46272 46302 46332 46362 46392 46432 46472 46512 46562 46622 46682 46752 46822 For technical questions contact: [email protected] 450 400 Document Number: 28124 Revision: 28-Feb-05 MMKP 383 AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type Vishay BCcomponents SPECIFIC REFERENCE DATA (1600 VDC) DESCRIPTION VALUE Tangent of loss angle: C ≤ 0.015 µF 0.015 µF < C ≤ 0.15 µF Rated voltage pulse slope (dU/dt)R: P = 15.0 mm and 7.5 mm (bent back), for C ≤ 0.0056 µF P = 15.0 mm and 7.5 mm (bent back), for 0.0056 µF < C ≤ 0.015 µF P = 22.5 mm P = 27.5 mm, for 0.039 µF < C ≤ 0.1 µF P = 27.5 mm; for 0.1 µF < C ≤ 0.15 µF R between leads, for C ≤ 1 µF at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤15 × 10−4 ≤20 × 10−4 8000 V/µs 15000 V/µs 3100 V/µs 1800 V/µs 1200 V/µs >100000 MΩ >30000 MΩ >660 V 2560 V; 1 minute 2840 V; 1 minute URdc = 1600 V; URac = 550 V/Up-p = 1600 V (standard) CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.0027 0.003 0.0033 5.0 × 11.0 (13.0) × 17.5 0.0036 0.0039 0.0043 0.0047 6.0 × 12.0 (14.0) × 17.5 0.0051 0.0056 0.0062 0.0068 7.0 × 13.5 (15.5) × 17.5 0.0075 0.0082 0.0091 8.5 × 15.0 (17.0) × 17.5 0.01 0.011 0.012 0.013 10.0 × 16.5 (18.5) × 17.5 0.015 1.2 1.5 2.0 2.7 3.3 7.0 × 16.5 × 26.0 Document Number: 28124 Revision: 28-Feb-05 3.5 ∅ 356 mm SPQ SPQ pitch = 15.0 mm pitch = 7.5 mm (bent back) 50272 50302 50332 50362 50392 50432 50472 50512 50562 50622 50682 50752 50822 50912 50103 50113 50123 50133 50153 1250 1000 1100 1000 1000 900 750 500 800 750 500 650 500 450 600 Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.016 0.018 0.02 SPQ last 5 digits of catalog number 53272 53302 53332 53362 53392 53432 53472 53512 53562 53622 53682 53752 53822 53912 53103 53113 53123 53133 53153 950 550 800 450 700 400 550 300 500 250 pitch = 22.5 mm pitch = 7.5 mm (bent back) 50163 50183 50203 200 250 550 For technical questions contact: [email protected] www.vishay.com 211 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number 0.022 0.024 0.027 0.03 0.033 0.036 0.039 8.5 × 18.0 × 26.0 4.8 10.0 × 19.5 × 26.0 6.0 50223 50243 50273 50303 50333 50363 50393 SPQ SPQ SPQ 200 250 450 200 200 350 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 11.0 × 21.0 × 31.0 8.4 13.0 × 23.0 × 31.0 11.0 15.0 × 25.0 × 31.0 13.6 18.0 × 28.0 × 31.0 18.5 last 5 digits of catalog number ∅ 356 mm SPQ SPQ pitch = 27.5 mm pitch = 7.5 mm (bent back) 50433 50473 50513 50563 50623 50683 50753 50823 50913 50104 50114 50124 50134 50154 100 125 100 125 100 125 100 100 URdc = 1600 V; URac = 550 V/Up-p = 1600 V (hot asphalt encapsulation) CATALOG NUMBER 2222 383 ..... AND PACKAGING C (µF) DIMENSIONS w × h (h’) × l (mm) REEL; ∅ 356 mm MASS (g) C-tol = ±5% last 5 digits of catalog number SPQ Pitch = 15.0 ±0.4 mm; (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm 0.0027 56272 0.003 56302 0.0033 6.0 × 12.0 (14.0) × 17.5 1.5 56332 0.0036 56362 0.0039 56392 0.0043 56432 0.0047 56472 0.0051 0.0056 450 56512 7.0 × 13.5 (15.5) × 17.5 2.0 56562 0.0062 56622 0.0068 56682 0.0075 56752 www.vishay.com 212 For technical questions contact: [email protected] 400 Document Number: 28124 Revision: 28-Feb-05 MMKP 383 AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type Vishay BCcomponents SPECIFIC REFERENCE DATA (2000 VDC) DESCRIPTION VALUE Tangent of loss angle: C ≤ 0.01 µF 0.01 µF < C ≤ 0.1 µF Rated voltage pulse slope (dU/dt)R: P = 15.0 mm and 7.5 mm (bent back), for C ≤ 0.0036 µF P = 15.0 mm and 7.5 mm (bent back), for 0.0036 µF < C ≤ 0.01 µF P = 22.5 mm P = 27.5 mm, for 0.024 µF < C ≤ 0.068 µF P = 27.5 mm, for 0.068 µF < C ≤ 0.1 µF R between leads, for C ≤ 1 µF at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz ≤5 × 10−4 ≤5 × 10−4 at 100 kHz ≤15 × 10−4 ≤18 × 10−4 11000 V/µs 20000 V/µs 4400 V/µs 2500 V/µs 1800 V/µs >100000 MΩ >30000 MΩ >750 V 3200 V; 1 minute 2840 V; 1 minute URdc = 2000 V; URac = 700 V/Up-p = 2000 V (standard) CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.001 0.0011 0.0012 0.0013 0.0015 5.0 × 11.0 (13.0) × 17.5 0.0016 0.0018 0.002 0.0022 0.0024 0.0027 0.003 6.0 × 12.0 (14.0) × 17.5 0.0033 0.0036 0.0039 0.0043 7.0 × 13.5 (15.5) × 17.5 0.0047 0.0051 0.0056 8.5 × 15.0 (17.0) × 17.5 0.0062 0.0068 0.0075 0.0082 10.0 × 16.5 (18.5) × 17.5 0.0091 0.01 Document Number: 28124 Revision: 28-Feb-05 1.2 1.5 2.0 2.7 3.3 SPQ last 5 digits of catalog number ∅ 356 mm SPQ SPQ pitch = 15.0 mm pitch = 7.5 mm (bent back) 60102 60112 60122 60132 60152 60162 60182 60202 60222 60242 60272 60302 60332 60362 60392 60432 60472 60512 60562 60622 60682 60752 60822 60912 60103 1250 1000 1100 1000 1000 900 750 500 800 750 500 650 500 450 600 For technical questions contact: [email protected] 63102 63112 63122 63132 63152 63162 63182 63202 63222 63242 63272 63302 63332 63362 63392 63432 63472 63512 63562 63622 63682 63752 63822 63912 63103 950 550 800 450 700 400 550 300 500 250 www.vishay.com 213 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm short leads REEL long leads pitch = 7.5 mm (bent back) original pitch C-tol = ±5% C-tol = ±5% ∅ 500 mm last 5 digits of catalog number SPQ SPQ Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 7.0 × 16.5 × 26.0 3.5 8.5 × 18.0 × 26.0 4.8 10.0 × 19.5 × 26.0 6.0 11.0 × 21.0 × 31.0 8.4 13.0 × 23.0 × 31.0 11.0 15.0 × 25.0 × 31.0 13.6 18.0 × 28.0 × 31.0 18.5 ∅ 356 mm SPQ SPQ pitch = 22.5 mm pitch = 7.5 mm (bent back) 60113 60123 60133 60153 60163 60183 60203 60223 60243 200 250 550 200 250 450 200 200 350 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.027 0.03 0.033 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 SPQ last 5 digits of catalog number pitch = 27.5 mm pitch = 7.5 mm (bent back) 60273 60303 60333 60363 60393 60433 60473 60513 60563 60623 60683 60753 60823 60913 60104 100 125 100 125 100 125 100 100 URdc = 2000 V; URac = 700 V/Up-p = 2000 V (hot asphalt encapsulation) CATALOG NUMBER 2222 383 ..... AND PACKAGING C (µF) DIMENSIONS w × h (h’) × l (mm) MAS S (g) REEL; ∅ 356 mm C-tol = ±5% last 5 digits of catalog number SPQ Pitch = 15.0 ±0.4 mm; (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 0.002 0.0022 0.0024 6.0 × 12.0 (14.0) × 17.5 www.vishay.com 214 1.5 66102 66112 66122 66132 66152 66162 66182 66202 66222 66242 For technical questions contact: [email protected] 450 Document Number: 28124 Revision: 28-Feb-05 MMKP 383 AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type Vishay BCcomponents CATALOG NUMBER 2222 383 ..... AND PACKAGING C (µF) MAS S (g) DIMENSIONS w × h (h’) × l (mm) 0.0027 0.003 0.0033 0.0036 7.0 × 13.5 (15.5) × 17.5 0.0039 0.0043 0.0047 REEL; ∅ 356 mm C-tol = ±5% last 5 digits of catalog number SPQ 66272 66302 66332 66362 66392 66432 66472 400 2.0 SPECIFIC REFERENCE DATA (2500 VDC) DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz C ≤ 0.015 µF ≤5 × 10−4 ≤10 × 10−4 0.015 µF < C ≤ 0.056 µF ≤5 × 10−4 ≤15 × 10−4 Rated voltage pulse slope (dU/dt)R: P = 22.5 mm 13000 V/µs P = 27.5 mm, for 0.015 µF < C ≤ 0.043 µF 6000 V/µs P = 27.5 mm, for 0.043 µF < C ≤ 0.056 µF 4200 V/µs R between leads, for C ≤ 1 µF at 500 V; 1 minute >100000 MΩ R between leads and case; 500 V; 1 minute >30000 MΩ >1000 V Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3500 V; 1 minute Withstanding (DC) voltage between leads and case 2840 V; 1 minute URdc = 2500 V; URac = 900 V/Up-p = 2500 V CATALOG NUMBER AND PACKAGING C (µF) DIMENSIONS w×h×l (mm) MASS (g) LOOSE IN BOX REEL lt = 3.5 ±0.3 mm short leads long leads H = 18.5 mm C-tol = ±5% SPQ SPQ SPQ 200 250 600 Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.001 70102 0.0011 70112 0.0012 70122 0.0013 70132 0.0015 70152 0.0016 70162 0.0018 0.002 6.0 × 15.5 × 26.0 3.0 70182 70202 0.0022 70222 0.0024 70242 0.0027 70272 0.003 70302 0.0033 70332 0.0036 70362 Document Number: 28124 Revision: 28-Feb-05 For technical questions contact: [email protected] www.vishay.com 215 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type CATALOG NUMBER AND PACKAGING C (µF) DIMENSIONS w×h×l (mm) MASS (g) 0.0039 lt = 3.5 ±0.3 mm short leads long leads H = 18.5 mm C-tol = ±5% SPQ SPQ SPQ 200 250 600 200 250 550 200 250 450 200 200 350 100 150 100 125 100 125 100 125 100 100 70432 6.0 × 15.5 × 26.0 3.0 70472 0.0051 70512 0.0056 70562 0.0062 0.0068 70622 7.0 × 16.5 × 26.0 3.5 0.0075 70682 70752 0.0082 70822 0.0091 70912 0.01 8.5 × 18.0 × 26.0 4.8 0.011 70103 70113 0.012 0.013 REEL 70392 0.0043 0.0047 LOOSE IN BOX 70123 10.0 × 19.5 × 26.0 6.0 0.015 70133 70153 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.016 9.0 × 19.0 × 31.0 6.0 0.018 0.02 0.022 11.0 × 21.0 × 31.0 8.4 0.024 11.0 70303 70333 0.036 70363 15.0 × 25.0 × 31.0 13.6 0.043 70393 70433 0.047 0.051 70223 70273 13.0 × 23.0 × 31.0 0.033 0.039 70203 70243 0.027 0.03 70163 70183 70473 18.0 × 28.0 × 31.0 0.056 www.vishay.com 216 18.5 70513 70563 For technical questions contact: [email protected] Document Number: 28124 Revision: 28-Feb-05 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY 3 10 10 3 AC voltage (V) AC voltage (V) 10 2 10 2 F 0n 10 nF 0 F 22 0 n 47 0 nF F 0 10 00 n 22 F 0n 10 0 nFF 22 0 n F 47 0 n F 0 10 00 n 22 Tamb ≤ 85 °C, 250 VDC 10 1 3 10 85 °C < Tamb ≤ 105 °C, 250 VDC 5 10 10 6 7 8 10 f (Hz) 10 3 10 10 1 2 10 10 10 3 2 10 10 4 10 5 10 6 10 7 f (Hz) 8 10 3 10 10 6 f (Hz) 7 10 10 6 f (Hz) 10 10 6 f (Hz) 10 2 2 10 3 10 4 10 5 7 3 AC voltage (V) AC voltage (V) 1 10 10 2 10 2 nF 47 0 nF F 10 0 n F 22 0 n F 47 0 n 0 10 nF 47 nF 0 10 nF 0 22 0 nF 47 0 nF 0 10 85 °C < Tamb ≤ 105 °C, 630 VDC Tamb ≤ 85 °C, 630 VDC 1 10 3 10 5 nF 47 nF 0 10 0 nF 22 70 F 4 n 0n0F 10 10 10 3 nF 47 nF 0 10 0 nFF 22 0 n F 47 0 n 0 10 10 4 85 °C < Tamb ≤ 105 °C, 400 VDC Tamb ≤ 85 °C, 400 VDC 10 1 3 10 10 AC voltage (V) AC voltage (V) 10 10 4 10 4 Document Number: 28124 Revision: 28-Feb-05 10 5 10 6 10 7 f (Hz) 10 8 10 1 2 10 10 3 10 For technical questions contact: [email protected] 4 10 5 7 www.vishay.com 217 MMKP 383 Vishay BCcomponents 3 10 2 10 2 Tamb ≤ 85 °C, 1000 VDC 10 1 3 10 85 °C < Tamb ≤ 105 °C, 1000 VDC 5 10 10 6 10 7 f (Hz) 10 8 3 10 10 4 10 5 10 6 10 7 f (Hz) 10 8 3 2 10 1 2 10 10 5 10 6 f (Hz) 10 6 f (Hz) 7 10 10 6 f (Hz) 7 10 10 7 10 3 10 4 10 5 3 AC voltage (V) AC voltage (V) 10 10 www.vishay.com 218 4 10 2 85 °C < Tamb ≤ 105 °C, 1600 VDC Tamb ≤ 85 °C, 1600 VDC 10 nF 4.7 0 nF F 1 n 22 nF 47 0 nF 10 2 10 1 3 10 4 85 °C < Tamb ≤ 105 °C, 1400 VDC nFF 4.70 n F 1 n 22 nF 47 0 nF 10 10 10 3 Tamb ≤ 85 °C, 1400 VDC 10 3 AC voltage (V) 2 10 1 3 10 10 nF 2.2 nF 4.7 nF 10 nF 22 nF 47 nF 0 10 nF 2.2 nF 4.7 nF F 10 n 22 nF 47 0 nF 10 10 10 1 2 10 10 AC voltage (V) 10 10 4 nF 4 .7 n F 10 nF 22 nF 47 nF 0 F 10 0 n F 22 0 n 47 nF 4 .7 n F 10 nF 22 nF F 47 0n F 10 20 n F 2 0n 47 10 3 AC voltage (V) AC voltage (V) 10 AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type 5 10 6 10 7 f (Hz) 10 8 10 1 2 10 10 3 For technical questions contact: [email protected] 10 4 10 5 Document Number: 28124 Revision: 28-Feb-05 MMKP 383 Vishay BCcomponents AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type 3 10 2 10 nF 1 .0 n F 2 .2 n F 4 .7 n F 10 nF 22 nF 47 nF 0 10 nF 1 .0 2 n F 2. nF F 4 .7 0 n F 1 n 22 nF 47 0 nF 10 10 3 AC voltage (V) AC voltage (V) 10 2 85 °C < Tamb ≤ 105 °C, 2000 VDC Tamb ≤ 85 °C, 2000 VDC 1 10 3 10 4 10 5 10 6 10 7 f (Hz) 10 8 3 10 2 10 10 4 10 10 6 10 7 f (Hz) 10 10 5 10 6 f (Hz) 10 10 6 f (Hz) 10 7 2 8 10 1 10 2 10 3 10 4 10 5 7 IMPEDANCE 4 ∆C/C (%) 4 85 °C < Tamb ≤ 105 °C, 2500 VDC 5 CAPACITANCE 10 1 kHz 2 Impedance (Ω) 2 10 3 Tamb ≤ 85 °C, 2500 VDC 1 10 3 10 3 nF 1.0 nF 2.2 nF 4.7 nF 10 nF 22 nF 47 nF 1.0 2 nF 2. nF 4.7 nF 10 nF 22 nF 47 10 10 AC voltage (V) AC voltage (V) 10 10 10 1 2 10 typical max. 0 10 0 1.0 nF -1 10 -2 10 nF 100 nF 10 -4 -6 -60 min. -20 Document Number: 28124 Revision: 28-Feb-05 20 60 Tamb (°C) 100 -2 -3 10 4 10 2.2 µF 10 5 For technical questions contact: [email protected] 1.0 µF 10 6 10 7 f (Hz) 8 10 www.vishay.com 219