MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES l 168x12(halfpage) w l h 7.5 mm to 27.5 mm lead pitch. Supplied loose in box, taped on ammopack or reel w h h' F' lt P Ø dt RoHS compliant product (1) F H Ø dt 10 RATED VOLTAGE AC 310 V; 50 Hz to 60 Hz 15 Dimensions in mm PERMISSIBLE DC VOLTAGE (1) ⎪F - F’⎪ < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm DC 630 V ENCAPSULATION APPLICATIONS For standard across the line X2 applications. See also application note: www.vishay.com/docs/28153/anaccaps.pdf Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 CLIMATIC TESTING CLASS ACC. TO IEC 60068-1 55/110/56/B REFERENCE STANDARDS “IEC 60384-14 ed-3 and EN 60384-14 “IEC 60065, pass. flamm. class B” CSA-C22.2 No. 1; UL1414 CSA-E384-14; UL1283; CQC CAPACITANCE RANGE (E12 SERIES) E12 series 0.001 to 4.7 µF Preferred values acc. to E6 MARKING CAPACITANCE TOLERANCE C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation; code for dielectric material, manufacturer location; manufacturer’s logo; year and week; safety approvals ± 20 %; ± 10 %; ± 5 % DIELECTRIC Polypropylene film ELECTRODES LEADS Tinned wire MAXIMUM APPLICATION TEMPERATURE C ≤ 470 nF: 110 °C (125 °C for less than 1000 h) C > 470 nF: 110 °C Metallized film DETAIL SPECIFICATION CONSTRUCTION For more detailed data and test requirements contact: [email protected] Mono construction www.vishay.com 304 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) TYPE AND PITCHES 7.5 mm 7.5 mm (bent back) 339 10.0 mm X2 15.0 mm CAPACITANCE (numerically) 22.5 mm 0.1 2 1 3 10 4 100 5 27.5 mm Example: 104 = 10 x 10 = 100 nF BFC2 2222 (*) 339 339 XX XX X XX XX X (*) old ordering code TYPE PACKAGING Loose in box Taped (1) Loose in box Taped (1) Loose in box 339 X2 Taped (1) PACKAGING Loose in box Taped (1) Loose in box Taped (1) Loose in box Taped (1) STANDARD DIMENSIONS Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm Lead length 5.0 mm ± 1.0 mm Lead length 25.0 mm ± 2.0 mm Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm Ammopack: H = 18.5 mm; P0 = 12.7 mm Reel: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm Lead length 5.0 mm ± 1.0 mm Lead length 25.0 mm ± 2.0 mm Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm Ammopack: H = 18.5 mm; P0 = 12.7 mm Reel: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm Lead length 5.0 mm ± 1.0 mm Llead length 25.0 mm ± 2.0 mm Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm Ammopack: H = 18.5 mm; P0 = 12.7 mm Reel: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm ALTERNATIVE LARGER PITCH SIZES Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm Lead length 5.0 mm ± 1.0 mm Lead length 25.0 mm ± 2.0 mm Reel or ammopack: H = 18.5 mm; P0 = 12.7 mm Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm Lead length 5.0 mm ± 1.0 mm Lead length 25.0 mm ± 2.0 mm Reel or ammopack: H = 18.5 mm; P0 = 12.7 mm Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm Lead length 5.0 mm ± 1.0 mm Lead length 25.0 mm ± 2.0 mm Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm Ammopack: H = 18.5 mm; P0 = 12.7 mm C-TOL ± 20 % ± 10 % ±5% C-TOL ± 20 % ± 10 % ±5% CODE NUMBER BFC2 339 20... BFC2 339 22... BFC2 339 24... BFC2 339 26... BFC2 339 28... BFC2 339 56... BFC2 339 58... BFC2 339 10... BFC2 339 12... BFC2 339 14... BFC2 339 16... BFC2 339 18... BFC2 339 66... BFC2 339 68... BFC2 339 50... BFC2 339 52... BFC2 339 54... BFC2 339 36... BFC2 339 38... BFC2 339 76... BFC2 339 78... CODE NUMBER BFC2 339 21... BFC2 339 23... BFC2 339 25... BFC2 339 27... BFC2 339 11... BFC2 339 13... BFC2 339 15... BFC2 339 17... BFC2 339 51... BFC2 339 53... BFC2 339 55... BFC2 339 46... BFC2 339 48... Note (1) For detailed tape specification refer to Packaging Information: www.vishay.com/doc?28139 or end of catalog Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 305 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type SPECIFIC REFERENCE DATA DESCRIPTION VALUE Rated AC voltage (URac) 310 V Permissible DC voltage (URdc) 630 V Tangent of loss angle: at 1 kHz C < 470 nF ≤ 10 x 10-4 at 10 kHz ≤ 20 x 10-4 470 nF ≤ C ≤ 1 µF ≤ 20 x 10-4 ≤ 70 x 10-4 C > 1 µF ≤ 30 x 10-4 - Rated voltage pulse slope (dU/dt)R at 435 Vdc Pitch = 7.5 mm 600 V/µs Pitch = 10 mm 600 V/µs Pitch = 15 mm and 7.5 mm (bent back) 400 V/µs Pitch = 22.5 mm 150 V/µs Pitch = 27.5 mm 100 V/µs R between leads, for C ≤ 0.33 µF at 100 V; 1 min > 15 000 MΩ RC between leads, for C > 0.33 µF at 100 V; 1 min > 5000 s R between leads and case; 100 V; 1 min > 30 000 MΩ Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s: C ≤ 1 µF 2200 V; 1 min C > 1 µF 1800 V; 1 min Withstanding (AC) voltage between leads and case 2120 V; 1 min Max. application temperature for 0.001 µF ≤ C ≤ 0.47 µF 110 °C (125 °C for less than 1000 h) Max. application temperature for C > 0.47 µF 110 °C Pitch: 7.5 mm; C-tol. = 20 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING AMMOPACK (1) LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (2) Short leads It = 3.5 mm + 1 mm/- 0.5 mm It = 5.0 mm ± 1.0 mm H = 18.5 mm P0 = 12.7 mm Long leads SPQ It = 25.0 mm ± 2.0 mm SPQ SPQ Pitch = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm 0.001 20102 22102 24102 28102 0.0015 20152 22152 24152 28152 0.0022 20222 22222 24222 28222 0.0033 20332 22332 24332 28332 20472 22472 20682 22682 0.01 20103 22103 24103 28103 0.015 20153 22153 24153 28153 0.022 20223 22223 24223 28223 0.0047 0.0068 4.0 x 9.0 x 10.0 0.4 0.033 24472 1500 24682 28472 1000 24333 28682 1250 20333 22333 0.047 5.0 x 10.5 x 10.0 0.4 20473 22473 1000 24473 1250 28333 28473 1000 0.068 6.0 x 11.5 x 10.0 0.8 20683 22683 750 24683 1000 28683 750 Notes (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only • SPQ = Standard Packing Quantity www.vishay.com 306 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents Pitch: 7.5 mm bent back (only taped); C-tol. = ± 20 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING C (µF) DIMENSIONS w x h’ x l (mm) LOOSE IN BOX MASS (g) (2) REEL (500 mm) (1) AMMOPACK H = 16.0 mm P0 = 15.0 mm SPQ H = 16.0 mm P0 = 15.0 mm SPQ 1000 56104 1500 - - 56154 800 Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.1 6.0 x 14.0 x 12.5 1.1 58104 Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.15 6.0 x 14.0 x 17.5 1.4 Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.22 7.0 x 15.5 x 17.5 1.8 - - 56224 700 0.33 8.5 x 17.0 x 17.5 2.4 - - 56334 550 0.47 10.0 x 18.5 x 17.5 3.0 - - 56474 500 Notes (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only • SPQ = Standard Packing Quantity Pitch: 7.5 mm; C-tol. = 10 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING AMMOPACK (1) LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (2) Short leads It = 3.5 mm + 1 mm/- 0.5 mm It = 5.0 mm ± 1.0 mm SPQ It = 25.0 mm ± 2.0 mm Pitch = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm 0.001 10102 12102 14102 0.0012 10122 12122 14122 0.0015 10152 12152 14152 0.0018 10182 12182 14182 0.0022 10222 12222 14222 0.0027 10272 12272 14272 0.0033 10332 12332 14332 0.0039 10392 12392 14392 0.0047 10472 12472 14472 0.0056 4.0 x 9.0 x 10.0 0.45 10562 12562 1500 14562 0.0068 10682 12682 14682 0.0082 10822 12822 14822 0.01 10103 12103 14103 0.012 10123 12123 14123 0.015 10153 12153 14153 0.018 10183 12183 14183 0.022 10223 12223 14223 0.027 10273 12273 14273 0.033 10333 12333 14333 0.039 5.0 x 10.5 x 10.0 0.6 10393 12393 1000 14393 0.047 10473 12473 14473 0.056 6.0 x 11.5 x 10.0 0.8 10563 12563 750 14563 Notes (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only • SPQ = Standard Packing Quantity Document Number: 28138 Revision: 31-Aug-09 H = 18.5 mm P0 = 12.7 mm Long leads For technical questions, contact: [email protected] SPQ 1000 1250 1000 SPQ 18102 18122 18152 18182 18222 18272 18332 18392 18472 18562 18682 18822 18103 18123 18153 18183 18223 18273 18333 18393 18473 18563 1250 1000 750 www.vishay.com 307 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Bent back pitch: 7.5 mm (only taped); C-tol. = ± 10 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING LOOSE IN BOX MASS C AMMOPACK REEL (500 mm) (1) (µF) (g) (2) H = 16.0 mm H = 16.0 mm SPQ SPQ P0 = 15.0 mm P0 = 15.0 mm Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.068 5.0 x 13.0 x 12.5 0.9 68683 1300 66683 1900 0.082 68823 66823 6.0 x 14.0 x 12.5 1.1 1000 1500 0.1 68104 66104 Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.12 66124 6.0 x 14.0 x 17.5 1.4 800 66154 0.15 Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.18 66184 7.0 x 15.5 x 17.5 1.8 700 66224 0.22 0.27 66274 8.5 x 17.0 x 17.5 2.4 550 66334 0.33 0.39 66394 10.0 x 18.5 x 17.5 3.0 66474 500 0.47 Notes (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only • SPQ = Standard Packing Quantity DIMENSIONS wxhxl (mm) Pitch: 7.5 mm; C-tol. = ± 5 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING LOOSE IN BOX AMMOPACK (1) DIMENSIONS MASS C H = 18.5 mm wxhxl Short leads Long leads (µF) (g) (2) P0 = 12.7 mm (mm) It = 25.0 mm It = 5.0 mm It = 3.5 mm SPQ SPQ SPQ ± 1.0 mm ± 2.0 mm + 1 mm/- 0.5 mm Pitch = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm 0.001 50102 52102 54102 38102 0.0012 50122 52122 54122 38122 0.0015 50152 52152 54152 38152 0.0018 50182 52182 54182 38182 0.0022 50222 52222 54222 38222 0.0027 50272 52272 54272 38272 0.0033 50332 52332 54332 38332 0.0039 50392 52392 54392 38392 0.0047 4.0 x 9.0 x 10.0 0.45 50472 52472 1500 54472 1000 38472 1250 0.0056 50562 52562 54562 38562 0.0068 50682 52682 54682 38682 0.0082 50822 52822 54822 38822 0.01 50103 52103 54103 38103 0.012 50123 52123 54123 38123 0.015 50153 52153 54153 38153 0.018 50183 52183 54183 38183 0.022 50223 52223 54223 38223 0.027 50273 52273 54273 38273 0.033 50333 52333 54333 38333 5.0 x 10.5 x 10.0 0.6 1000 1250 1000 0.039 50393 52393 54393 38393 0.047 50473 52473 54473 38473 6.0 x 11.5 x 10.0 0.8 750 1000 750 0.056 50563 52563 54563 38563 Notes (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only • SPQ = Standard Packing Quantity www.vishay.com 308 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents Bent back pitch: 7.5 mm (only taped); C-tol. = ± 5 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (2) REEL (500 mm) (1) H = 16.0 mm SPQ P0 = 15.0 mm AMMOPACK H = 16.0 mm P0 = 15.0 mm SPQ Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.068 5.0 x 13.0 x 12.5 0.9 78683 1300 76683 1900 0.082 6.0 x 14.0 x 12.5 1.1 78823 1000 76823 1500 1250 76104 1100 Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.1 0.12 0.15 5.0 x 13.0 x 17.5 6.0 x 14.0 x 17.5 1.0 78104 76124 1.4 - - - - 76154 800 76184 700 Bent back pitch = 7.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.18 7.0 x 15.5 x 17.5 1.8 0.22 0.27 76224 8.5 x 17.0 x 17.5 2.4 - - 10.0 x 18.5 x 17.5 3.0 - - 76274 0.33 0.39 550 76334 76394 500 Notes (1) Reel diameter = 356 mm, is available on request (2) Weight for short lead product only • SPQ = Standard Packing Quantity Pitch: 10.0 mm; C-tol. = ± 20 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) Short leads It = 3.5 mm + 1 mm/- 0.5 mm It = 5.0 mm ± 1.0 mm AMMOPACK (1) LARGE REEL (500 mm) (1) (2) H = 18.5 mm P0 = 12.7 mm H = 18.5.mm P0 = 15.0 mm Long leads SPQ It = 25.0 mm ± 2.0 mm SPQ SPQ SPQ Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 21102 23102 25102 27102 0.0015 21152 23152 25152 27152 0.0022 21222 23222 25222 27222 0.0033 21332 23332 25332 27332 0.0047 21472 23472 25472 21682 23682 0.01 21103 23103 25103 27103 0.015 21153 23153 25153 27153 0.022 21223 23223 25223 27223 0.033 21333 23333 25333 27333 0.047 21473 23473 25473 0.0068 4.0 x 10.0 x 12.5 0.6 1000 25682 27472 1250 27682 950 - 27473 0.068 5.0 x 11.0 x 12.5 0.82 21683 23683 1000 25683 1000 27683 750 0.1 6.0 x 12.0 x 12.5 1.1 20104 22104 750 24104 750 28104 600 26104 1500 Notes (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity (2) Reel Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 309 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 10.0 mm; C-tol. = ± 10 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) Short leads It = 5.0 mm It = 3.5 mm + 1 mm/- 0.5 mm ± 1.0 mm Long leads SPQ It = 25.0 mm ± 2.0 mm AMMOPACK (1) LARGE REEL (500 mm) (1) (2) H = 18.5 mm P0 = 12.7 mm H = 18.5 mm P0 = 15.0 mm SPQ SPQ SPQ Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 11102 13102 15102 17102 0.0012 11122 13122 15122 17122 0.0015 11152 13152 15152 17152 0.0018 11182 13182 15182 17182 0.0022 11222 13222 15222 17222 0.0027 11272 13272 15272 17272 0.0033 11332 13332 15332 17332 0.0039 11392 13392 15392 17392 0.0047 11472 13472 15472 17472 11562 13562 11682 13682 0.0082 11822 13822 15822 17822 0.01 11103 13103 15103 17103 0.012 11123 13123 15123 17123 0.015 11153 13153 15153 17153 0.018 11183 13183 15183 17183 0.022 11223 13223 15223 17223 0.027 11273 13273 15273 17273 0.033 11333 13333 15333 17333 0.039 11393 13393 15393 17393 0.0056 0.0068 4.0 x 10.0 x 12.5 0.6 15562 1000 15682 17562 1250 17682 0.047 11473 13473 15473 17473 0.056 11563 13563 15563 17563 10683 12683 10823 12823 10104 12104 0.068 0.082 0.1 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.82 1.1 1000 750 14683 14823 14104 1000 750 18683 18823 18104 950 750 600 - 16683 16823 16104 1900 1500 Notes (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity (2) Reel www.vishay.com 310 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents Pitch: 10.0 mm; C-tol. = ± 5 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING AMMOPACK (1) LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) Short leads It = 3.5 mm + 1 mm/- 0.5 mm It = 5.0 mm ± 1.0 mm H = 18.5 mm P0 = 12.7 mm Long leads SPQ It = 25.0 mm ± 2.0 mm SPQ LARGE REEL (500 mm) (1) (2) H = 18.5.mm P0 = 15.0 mm SPQ SPQ Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.001 51102 53102 55102 48102 0.0012 51122 53122 55122 48122 0.0015 51152 53152 55152 48152 0.0018 51182 53182 55182 48182 0.0022 51222 53222 55222 48222 0.0027 51272 53272 55272 48272 0.0033 51332 53332 55332 48332 0.0039 51392 53392 55392 48392 0.0047 51472 53472 55472 48472 51562 53562 51682 53682 0.0056 0.0068 4.0 x 10.0 x 12.5 0.6 55562 1000 55682 48562 1250 48682 0.0082 51822 53822 55822 48822 0.01 51103 53103 55103 48103 0.012 51123 53123 55123 48123 0.015 51153 53153 55153 48153 0.018 51183 53183 55183 48183 0.022 51223 53223 55223 48223 0.027 51273 53273 55273 48273 0.033 51333 53333 55333 48333 0.039 51393 53393 55393 48393 0.047 51473 53473 55473 48473 0.056 51563 53563 55563 48563 50683 52683 50823 52823 0.068 0.082 5.0 x 11.0 x 12.5 0.82 6.0 x 12.0 x 12.5 1.1 1000 750 54683 54823 1000 750 38683 38823 950 750 600 - 46563 36683 36823 1900 1500 Notes (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Reel diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 311 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 15.0 mm; C-tol. = ± 20 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING REEL (500 mm) (1) (2) LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) Short leads It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm H = 18.5.mm P0 = 12.7 mm Long leads SPQ It = 25.0 mm ± 2.0 mm SPQ SPQ Pitch = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 90001 90007 90014 90021 0.015 90002 90008 90015 90022 0.022 90003 90009 90016 90023 90004 90011 0.047 90005 90012 90018 90025 0.068 90006 90013 90019 90026 21104 23104 20154 22154 1000 24154 1000 26154 900 22224 750 24224 500 26224 800 0.033 5.0 x 11.0 x 17.5 1 0.1 0.15 6.0 x 12.0 x 17.5 1.4 1250 90017 1000 25104 90024 1100 27104 Pitch = 15 mm ± 0.4 mm; dt= 0.80 mm ± 0.08 mm 0.22 7.0 x 13.5 x 17.5 1.8 20224 0.33 8.5 x 15.0 x 17.5 2.4 20334 22334 750 24334 500 26334 650 0.47 10.0 x16.5 x 17.5 3 20474 22474 500 24474 450 26474 600 0.47 8.5 x 17.5 x 18.0 3.1 90165 90166 300 90143 500 - - 0.56 11.0 x 18.5 x 18.0 4.3 90174 90175 225 90176 350 - - 0.68 11.0 x 18.5 x 18.0 5.5 90168 90169 225 90145 350 - - Notes (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity (2) Reel www.vishay.com 312 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents Pitch: 15.0 mm; C-tol. = ± 10 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING REEL (500 mm) (1) (2) H = 18.5 mm P0 = 12.7 mm LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) Short leads It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm Long leads SPQ It = 25.0 mm ± 2.0 mm SPQ SPQ Pitch = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 90027 90039 90052 90064 0.012 90028 90041 90053 90065 0.015 90029 90042 90054 90066 0.018 90031 90043 90055 90067 0.022 90032 90044 90056 90068 0.027 90033 90045 90057 90069 0.033 90034 90046 0.039 5.0 x 11.0 x 17.5 1.0 90035 90047 1250 90059 90058 1000 90072 90071 0.047 90036 90048 90061 90073 0.056 90037 90049 90062 90074 0.068 11683 13683 15683 17683 0.082 11823 13823 15823 17823 0.1 11104 13104 15104 17104 0.12 10124 12124 14124 16124 10154 12154 0.15 6.0 x 12.0 x 17.5 1.4 1000 14154 1000 16154 1100 900 Pitch = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.18 0.22 0.27 0.33 0.33 0.39 0.47 0.56 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 9.3 x 14.0 x 18.5 2.9 10.0 x 16.5 x 17.5 3.0 11.0 x 18.5 x 18.0 4.3 10184 12184 10224 12224 10274 12274 10334 12334 - - 10394 12394 10474 12474 90167 90157 750 750 500 225 14184 14224 14274 14334 74334 14394 14474 90144 500 500 500 450 400 16184 16224 16274 16334 16394 16474 - 800 650 600 - Notes (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity (2) Reel Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 313 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 15.0 mm; C-tol. = ± 5 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) REEL (500 mm) (1) (2) H = 18.5 mm P0 = 12.7 mm LOOSE IN BOX MASS (g) (3) Short leads It = 3.5 mm ± 0.3 mm Pitch = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.01 90221 0.012 90222 0.015 90223 0.018 90224 0.022 90225 0.027 90226 5.0 x 11.0 x 17.5 1.0 0.033 90227 0.039 90228 0.047 90229 0.056 90231 0.068 51683 0.082 51823 0.1 50104 0.12 50124 6.0 x 12.0 x 17.5 1.4 0.15 50154 Pitch = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.18 7.0 x 13.5 x 17.5 1.8 50184 0.22 50224 8.5 x 15.0 x 17.5 2.4 0.27 50274 0.33 50334 0.39 10.0 x 16.5 x 17.5 3.0 50394 Long leads It = 5.0 mm ± 1.0 mm 90232 90233 90234 90235 90236 90237 90238 90239 90241 90242 53683 53823 52104 52124 52154 52184 52224 52274 52334 52394 SPQ 1250 1000 750 750 500 It = 25.0 mm ± 2.0 mm 90243 90244 90245 90246 90247 90248 90249 90251 90252 90253 55683 55823 54104 54124 54154 54184 54224 54274 54334 54394 SPQ 1000 1000 500 500 450 SPQ 90254 90255 90256 90257 90258 90259 90261 90262 90263 90264 46683 46823 36104 36124 36154 36184 36224 36274 36334 36394 1100 900 800 650 600 Notes (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity (2) Reel Pitch: 22.5 mm; C-tol. = ± 20 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) REEL (500 mm) (1) (2) H = 18.5 mm P0 = 12.7 mm LOOSE IN BOX MASS (g) (3) Short leads It = 3.5 mm ± 0.3 mm Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.15 21154 6.0 x 15.5 x 26.0 2.4 0.22 21224 0.33 21334 0.47 7.0 x 16.5 x 26.0 2.9 21474 0.68 8.5 x 18.0 x 26.0 3.8 20684 1.0 10.0 x 19.5 x 26.0 6.8 20105 1.5 12.5 x 22.5 x 26.5 10 90103 Notes It = 5.0 mm ± 1.0 mm 23154 23224 23334 23474 22684 22105 90138 Long leads SPQ 300 200 200 200 140 It = 25.0 mm ± 2.0 mm 25154 25224 25334 25474 24684 24105 90139 SPQ 250 250 250 200 400 SPQ 27154 27224 27334 27474 26684 26105 90141 600 500 450 350 300 (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity (2) Reel www.vishay.com 314 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents Pitch: 22.5 mm; C-tol. = ± 10 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) REEL (500 mm) (1) (2) H = 18.5 mm P0 = 12.7 mm LOOSE IN BOX MASS (g) (3) Short leads It = 3.5 mm ± 0.3 mm Long leads It = 5.0 mm ± 1.0 mm SPQ It = 25.0 mm ± 2.0 mm SPQ SPQ Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.12 11124 13124 15124 17124 0.15 11154 13154 15154 17154 0.18 11184 13184 15184 11224 13224 11274 13274 11334 13334 - - 11394 13394 11474 13474 0.22 6.0 x 15.5 x 26.0 2.4 0.27 0.33 0.33 0.39 0.47 8.5 x 14.0 x 26.5 7.0 x 16.5 x 26.0 3.6 2.9 300 15224 250 15274 200 75334 15394 15474 17224 600 17274 15334 - 17184 17334 800 250 17394 17474 500 0.47 8.5 x 14.0 x 26.5 3.6 - - - 75474 800 - - 0.56 8.5 x 18.0 x 26.0 3.8 10564 12564 200 14564 250 16564 450 10.0 x 19.5 x 26.0 6.8 10684 12684 10824 12824 12.0 x 22.0 x 26.0 7.8 10105 12105 0.68 0.82 1.0 200 150 14684 14824 14105 200 200 16684 16824 16105 350 300 Notes (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity (2) Reel Pitch: 22.5 mm; C-tol. = ± 5 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) REEL (500 mm) (1) (2) H = 18.5 mm P0 = 12.7 mm LOOSE IN BOX MASS (g) (3) Short leads It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm Long leads SPQ It = 25.0 mm ± 2.0 mm SPQ SPQ Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.12 51124 53124 55124 0.15 51154 53154 55154 51184 53184 51224 53224 0.18 6.0 x 15.5 x 26.0 2.4 0.22 300 55184 46124 46154 250 55224 46184 0.27 51274 53274 55274 46274 0.33 51334 53334 55334 46334 51394 53394 51474 53474 50564 52564 50684 52684 50824 52824 50105 52105 0.39 0.47 0.56 0.68 0.82 1.0 7.0 x 16.5 x 26.0 2.9 8.5 x 18.0 x 26.0 3.8 10.0 x 19.5 x 26.0 6.8 12.0 x 22.0 x 26.0 7.8 200 200 200 150 55394 55474 54564 54684 54824 54105 600 46224 250 250 200 200 46394 46474 36564 36684 36824 36105 500 450 350 300 Notes (1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only • SPQ = Standard Packing Quantity (2) Reel Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 315 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 27.5 mm; C-tol = ± 20 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING LOOSE IN BOX MASS C Short leads Long leads (1) (µF) (g) It = 5.0 mm It = 25.0 mm It = 3.5 mm SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm Pitch = 27.5 mm ± 0.4 mm; dt= 0.80 mm ± 0.08 mm 0.47 90076 90078 90081 9.0 x 19.0 x 31.5 5.5 100 0.68 21684 23684 25684 1.0 11.0 x 21.0 x 31.0 7.4 21105 23105 100 25105 1.5 13.0 x 23.0 x 31.0 9.2 20155 22155 100 24155 2.2 15.0 x 25.0 x 31.5 12.3 20225 22225 100 24225 3.3 18.0 x 28.0 x 31.5 16.1 20335 22335 100 24335 4.7 21.0 x 31.0 x 31.0 20.3 20475 22475 50 24475 Notes DIMENSIONS wxhxl (mm) SPQ 150 125 125 125 100 75 (1) Weight for short lead product only • SPQ = Standard Packing Quantity Pitch: 27.5 mm; C-tol = ± 10 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING LOOSE IN BOX C Short leads Long leads (µF) It = 5.0 mm I = 25.0 mm It = 3.5 mm t SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.68 9.0 x 19.0 x 31.5 5.5 11684 13684 100 15684 0.82 11824 13824 15824 11.0 x 21.0 x 31.0 7.4 100 1.0 11105 13105 15105 1.2 10125 12125 14125 1.5 13.0 x 23.0 x 31.0 9.2 10155 12155 100 14155 1.8 10185 12185 14185 15.0 x 25.0 x 31.5 12.3 100 2.2 10225 12225 14225 2.7 18.0 x 28.0 x 31.5 16.1 10275 12275 100 14275 3.3 10335 12335 14335 21.0 x 31.0 x 31.0 20.3 50 3.9 10395 12395 14395 Notes DIMENSIONS wxhxl (mm) MASS (g) (1) SPQ 150 125 125 125 100 75 (1) Weight for short lead product only • SPQ = Standard Packing Quantity Pitch: 27.5 mm; C-tol = ± 5 % CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING LOOSE IN BOX MASS C Short leads Long leads (1) (µF) (g) It = 5.0 mm I = 25.0 mm It = 3.5 mm t SPQ ± 0.3 mm ± 1.0 mm ± 2.0 mm Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.68 9.0 x 19.0 x 31.5 5.5 51684 53684 100 55684 0.82 51824 53824 55824 11.0 x 21.0 x 31.0 7.4 100 1.0 51105 53105 55105 1.2 50125 52125 54125 13.0 x 23.0 x 31.0 9.2 100 1.5 50155 52155 54155 1.8 15.0 x 25.0 x 31.5 12.3 50185 52185 100 54185 2.2 50225 52225 54225 18.0 x 28.0 x 31.5 16.1 100 2.7 50275 52275 54275 3.3 21.0 x 31.0 x 31.0 20.3 50335 52335 50 54335 DIMENSIONS wxhxl (mm) SPQ 150 125 125 125 100 75 Notes (1) Weight for short lead product only • SPQ = Standard Packing Quantity www.vishay.com 316 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents APPROVALS SAFETY APPROVALS X2 EN 60384-14 (ENEC) (= IEC 60384-14 ed-3) UL1414 and CSA-C22.2 No. 1 UL1283 CSA-E384-14 VOLTAGE VALUE FILE NUMBERS 310 Vac 1 nF to 4.7 µF FI 2008038 250 Vac 305 Vac 310 Vac 1 nF to 1 µF 1 nF to 4.7 µF 1 nF to 4.7 µF E112471 E109565 2123580 CQC 07001021281 (L) CQC 310Vac 1 nF to 4.7 µF CQC03001006960 (s) CQC 06001018290 (F) CB Test Certificate 310 Vac 1 nF to 4.7 µF FI 5123 The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech.Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom. ® CQC 16 MOUNTING Normal Use The capacitors are designed for mounting on printed circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to “Packaging Information”. www.vishay.com/doc?28139 or end of catalog Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed-circuit board: • For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped. Space Requirements on Printed-Circuit Board The maximum length and width of film capacitors is shown in the drawing: • Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned • Product height with seating plane as given by “IEC 60717” as reference: hmax. ≤ h + 0.3 mm or hmax. ≤ h’ + 0.3 mm. Eccentricity bmax. = b + 0.3 mm lmax. = l + 0.3 mm Storage Temperature • Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 317 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type CHARACTERISTICS Capacitance as a function of ambient temperature (typical curve) Impedance as a function of frequency (typical curve) 10 ΔC/C (%) 4 3 Impedance (%) 1n 10 typical 2 101 0 4.7 2 max. -2 100 -4 10-1 F nF 10 47 10 nF 0n F 47 0n 10 00 F nF 47 00 nF nF min. 10-2 104 -6 - 50 0 50 Tamb (°C) 100 Tangent of loss angle as a function of frequency (typical curve) 106 107 f (MHz) Dissipation factor (x 10-4) 102 102 101 µF > 1 µF C ≤1 C nF F < 220 0n ≤ 22 < C nF ≤ 47 nF 47 nF < C 10 nF 10 C≤ 101 101 102 103 104 f (Hz) X2 100 100 105 Max. RMS voltage as a function of frequency (typical curve) 10-1 1 10 100 1000 C (nF) 10 000 Max. RMS current as a function of frequency (typical curve) 104 3 AC voltage (V) 4700 nF AC current (mA) 10 3 1000 nF 470 nF 102 10 108 f (Hz) Resonant frequency as a function of capacitance (typical curve) 103 10 105 100 nF 2 47 nF 101 10 nF 4.7 nF 100 1nF Tamb ≤ 110 °C 101 101 www.vishay.com 318 10 2 10 3 10 4 f (Hz) 10 5 10-1 101 For technical questions, contact: [email protected] Tamb ≤ 110 °C 10 2 10 3 104 f (Hz) 105 Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents Insulation resistance as a function of ambient temperature (typical curve) RC (s) 106 105 104 0 20 40 60 80 100 Tamb (°C) APPLICATION NOTES • For X2 electromagnetic interference suppression in standard across the line applications (50/60 Hz) with a maximum mains voltage of 310 Vac. • For series impedance applications we refer to application note www.vishay.com/doc?28153 • These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse programs must be used. • The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C ≤ 470 nF and 110 °C for C > 470 nF. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 Vdc and divided by the applied voltage. INSPECTION REQUIREMENTS General Notes: 1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC Publication IEC 60384-14 ed-3 and Specific Reference Data. Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) Initial measurements As specified in section “General data” of this specification Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s No visible damage Bending: load 5 N; 4 x 90° Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 319 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents SUB-CLAUSE NUMBER AND TEST CONDITIONS 4.4 Resistance to soldering heat PERFORMANCE REQUIREMENTS No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance ¦ΔC/C¦ ≤ 5 % of the value measured initially. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.20 Solvent resistance of the marking Isopropylalcohol at room temperature No visible damage Method: 1 Legible marking Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 Rapid change of temperature θA = - 55 °C θB = + 110 °C 5 cycles Duration t = 30 min 4.6.1 Inspection Visual examination 4.7 Vibration Mounting: see section “Mounting” of this specification No visible damage Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 h 4.7.2 Final inspection Visual examination 4.9 Shock Mounting: see section “Mounting” for more information No visible damage Pulse shape: half sine Acceleration: 490 m/s² Duration of pulse: 11 ms www.vishay.com 320 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Vishay BCcomponents SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.9.2 Visual examination No visible damage Capacitance Tangent of loss angle ¦ΔC/C¦ ≤ 5 % of the value measured initially. Final measurements Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 110 °C 4.11.3 Damp heat cyclic Duration: 16 h Test Db First cycle 4.11.4 Cold Temperature: - 55 °C 4.11.5 Damp heat cyclic Duration: 2 h Test Db remaining cycles 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance Tangent of loss angle ¦ΔC/C¦ ≤ 5 % of the value measured in 4.11.1. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.11.1. Voltage proof No permanent breakdown or flash-over 1350 Vdc; 1 min between terminations Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB GROUP C2 4.12 Damp heat steady state 56 days; 40 °C; 90 % to 95 % RH no load 4.12.1 Initial measurements Capacitance Tangent of loss angle: at 1 kHz Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 321 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance ¦ΔC/C¦ ≤ 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.12.1. Voltage proof No permanent breakdown or flash-over 1350 Vdc; 1 min between terminations Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: No self healing breakdowns or flash-over X2: 2.5 kV for C ≤ 1 µF X2: 2.5 kV/√C for C > 1 µF 4.14 Endurance Max. 24 pulses Duration: 1000 h 1.25 x URac at 110 °C Once in every hour the voltage is increased to 1000 Vrms for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements Visual examination No visible damage Legible marking Capacitance ¦ΔC/C¦ ≤ 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.13.1. Voltage proof No permanent breakdown or flash-over 1350 Vdc; 1 min between terminations. 2120 Vac; 1 min between terminations and case. Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification www.vishay.com 322 For technical questions, contact: [email protected] Document Number: 28138 Revision: 31-Aug-09 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS Vishay BCcomponents PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.15 Charge and discharge 4.15.1 Initial measurements 10 000 cycles charged to 435 Vdc Discharge resistance: 435 Vdc R = ---------------------------------------------1.25 × C ( dU ⁄ dt ) Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.15.3 Final measurements ¦ΔC/C¦ ≤ 10 % compared to values measured in 4.15.1. Capacitance Increase of tan δ: Tangent of loss angle ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.15.1. Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Resonance frequency ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification. Passive flammability Bore of gas jet: Ø 0.5 mm Class B Fuel: butane After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C5 4.16 Radio frequency characteristic SUB-GROUP C6 4.17 Test duration for actual volume V in mm³: V ≤ 250: 10 s 250 < V ≤ 500: 20 s 500 < V ≤ 1750: 30 s V > 1750: 60 s One flame application 12 mm ~ 8 mm 45.0° SUB-GROUP C7 4.18 Active flammability 20 cycles of 2.5 kV discharges on the test capacitor connected to URac The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 28138 Revision: 31-Aug-09 For technical questions, contact: [email protected] www.vishay.com 323 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1