ONSEMI CAT6218

CAT6218
300 mA CMOS LDO
Regulator
Description
The CAT6218 is a 300 mA CMOS low dropout regulator that
provides fast response time during load current and line voltage
changes.
The quick−start feature allows the use of an external bypass
capacitor to reduce the overall output noise without affecting the
turn−on time of just 150 ms.
With zero shutdown current and low ground current of 55 mA
typical, the CAT6218 is ideal for battery−operated devices with supply
voltages from 2.3 V to 5.5 V. An internal under voltage lockout circuit
disables the output at supply voltages under 2.1 V typical.
The CAT6218 offers 1% initial accuracy and low dropout voltage,
180 mV typical at 300 mA. Stable operation is provided with a small
value ceramic capacitor, reducing required board space and
component cost.
Other features include fold−back current limit and thermal
protection.
The device is available in the low profile (1 mm max height) 5−lead
thin SOT23 package.
http://onsemi.com
5
1
TSOT−23
TD SUFFIX
CASE 419AE
PIN CONNECTIONS
1
VOUT
VIN
GND
BYP
EN
(Top View)
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Guaranteed 300 mA Output Current
Low Dropout Voltage of 180 mV Typical at 300 mA
Stable with 1 mF Ceramic Output Capacitor
External 10 nF Bypass Capacitor for Low Noise
Quick−start Feature
No−load Ground Current of 55 mA Typical
Full−load Ground Current of 80 mA Typical
±1.0% Initial Accuracy (VOUT ≥ 2.0 V)
±2.0% Accuracy Over Temperature (VOUT ≥ 2.0 V)
“Zero” Current Shutdown Mode
Fold−back Current Limit and Under−voltage Lockout
Thermal Protection
Thin SOT23−5 Package
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• Cellular Phones
• Battery−powered Devices
• Consumer Electronics
MARKING DIAGRAM
RUYM
RU= CAT6218 Device Code
Y = Production Year (last digit)
M = Production Month: 1 − 9, A, B, C
PIN FUNCTION
Pin #
Name
1
VIN
Supply voltage input.
2
GND
Ground reference.
3
EN
Enable input (active high); a 2.5 MW
pull−down resistor is provided.
4
BYP
Optional bypass capacitor connection for noise reduction and PSRR
enhancing.
5
Function
VOUT LDO Output Voltage.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2009
December, 2009 − Rev. 4
1
Publication Order Number:
CAT6218/D
CAT6218
VIN
VIN
2.3 V
to 5.5 V
OFF
ON
CIN
1 μF
VIN
VOUT
CAT6218
EN
BYP
GND
VIN
VOUT
COUT
1 μF
VOUT
LDO
EN
Reference
BYP
CBYP (Optional)
10 nF
VOUT
Shutdown
Switch
GND
Figure 1. Typical Application Circuit
Figure 2. CAT6218 Functional Block Diagram
Pin Function
VIN is the supply pin for the LDO. A small 1 mF ceramic
bypass capacitor is required between the VIN pin and ground
near the device. When using longer connections to the power
supply, CIN value can be increased without limit. The
operating input voltage range is from 2.3 V to 5.5 V.
EN is the enable control logic (active high) for the regulator
output. It has a 2.5 MW pull−down resistor, which assures
that if EN pin is left open, the circuit is disabled.
The capacitor should be located near the device. ESR
domain is 5 mW to 500 mW. VOUT can deliver a maximum
guaranteed current of 300 mA. For input−to−output voltages
higher than 1 V, a continuous 300 mA output current might
turn−on the thermal protection. A 250 W internal shutdown
switch discharges the output capacitor in the no−load
condition.
GND is the ground reference for the LDO. The pin must be
connected to the ground plane on the PCB.
VOUT is the LDO regulator output. A small 1 mF ceramic
bypass capacitor is required between the VOUT pin and
ground for stability. For better transient response, its value
can be increased to 4.7 mF.
BYP is the reference bypass pin. An optional 0.01 mF
capacitor can be connected between BYP pin and GND to
reduce the output noise and enhance the PSRR at high
frequency.
Table 1. ABSOLUTE MAXIMUM RATINGS
Parameter
VIN
Unit
0 to 6.5
V
−0.3 to VIN + 0.3
V
+150
_C
Internally Limited (Note 1)
mW
−65 to +150
_C
260
_C
3
kV
VEN, VOUT
Junction Temperature, TJ
Power Dissipation, PD
Rating
Storage Temperature Range, TS
Lead Temperature (soldering, 5 sec.)
ESD Rating (Human Body Model)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 2. RECOMMENDED OPERATING CONDITIONS (Note 2)
Parameter
Range
Unit
VIN
2.3 to 5.5
V
VEN
0 to VIN
V
−40 to +125
_C
235
_C/W
Junction Temperature Range, TJ
Package Thermal Resistance (SOT23−5), θJA
NOTE: Typical application circuit with external components is shown above.
1. The maximum allowable power dissipation at any TA (ambient temperature) is PDmax = (TJmax − TA)/qJA. Exceeding the maximum allowable
power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
2. The device is not guaranteed to work outside its operating rating.
http://onsemi.com
2
CAT6218
Table 3. ELECTRICAL OPERATING CHARACTERISTICS (Note 3)
(VIN = VOUT + 1.0 V, VEN = High, IOUT = 100 mA, CIN = COUT = 1 mF, ambient temperature of 25°C (over recommended operating
conditions unless specified otherwise). Bold numbers apply for the entire junction temperature range.)
Symbol
VOUT−ACC
Parameter
Output Voltage Accuracy
TCOUT
Output Voltage Temp. Coefficient
VR−LINE
Line Regulation
Conditions
Initial accuracy for VOUT ≥ 2.0 V
(Note 6)
Min
Typ
Max
Unit
−1.0
+1.0
%
−2.0
+2.0
40
VIN = VOUT + 1.0 V to 5.5 V
−0.2
±0.1
−0.4
VR−LOAD
Load Regulation
IOUT = 100 mA to 300 mA
ppm/°C
+0.2
%/V
+0.4
0.7
1.2
%
1.5
VDROP
Dropout Voltage (Note 4)
IOUT = 300 mA
180
250
mV
300
IGND
Ground Current
IOUT = 0 mA
55
IOUT = 300 mA
80
75
mA
90
IGND−SD
Shutdown Ground Current
VEN < 0.4 V
1
mA
2
PSRR
Power Supply Rejection Ratio
f = 1 kHz, CBYP = 10 nF
64
f = 20 kHz, CBYP = 10 nF
54
dB
ISC
Output short circuit current limit
VOUT = 0 V
180
mA
TON
Turn−On Time
CBYP = 10 nF
150
ms
eN
Output Noise Voltage (Note 5)
BW = 10 Hz to 100 kHz
45
mVrms
ROUT−SH
Shutdown Switch Resistance
250
W
Enable pull−down resistor
2.5
MW
Under−voltage lock out (UVLO)
threshold
2.1
V
REN
VUVLO
ESR
COUT equivalent series resistance
5
500
mW
ENABLE INPUT
VHI
Logic High Level
VIN = 2.3 to 5.5 V
1.8
VIN = 2.3 to 5.5 V, 0°C to +125°C
junction temperature
1.6
VLO
Logic Low Level
VIN = 2.3 to 5.5 V
IEN
Enable Input Current
VEN = 0.4 V
VEN = VIN
V
0.4
V
0.15
1
mA
1.5
4
THERMAL PROTECTION
TSD
Thermal Shutdown
160
°C
THYS
Thermal Hysteresis
10
°C
3. Specification for 2.80 V output version unless specified otherwise.
4. Dropout voltage is defined as the input−to−output differential at which the output voltage drops 2% below its nominal value measured at 1 V
differential. During test, the input voltage stays always above the minimum 2.3 V.
5. Specification for 1.8 V output version.
6. For VOUT < 2.0 V, the initial accuracy is ±2% and across temperature ±3%.
http://onsemi.com
3
CAT6218
TYPICAL CHARACTERISTICS (shown for 2.80 V output option)
(VIN = 3.85 V, IOUT = 100 mA, CIN = COUT = 1 mF, CBYP = 10 nF, TA = 25°C unless otherwise specified.)
2.87
3.0
100mA
2.86
OUTPUT VOLTAGE [V]
OUTPUT VOLTAGE [V]
2.5
2.0
300mA
1.5
1.0
0.5
2.85
2.84
2.83
2.82
0.0
0.0
1.0
2.0
3.0 4.0
5.0
INPUT VOLTAGE [V]
2.5
6.0
Figure 3. Dropout Characteristics
2.87
2.86
2.90
OUTPUT VOLTAGE [V]
OUTPUT VOLTAGE [V]
5.5
Figure 4. Line Regulation
2.95
2.85
2.80
2.75
2.85
2.84
2.83
2.82
0
50 100 150 200 250 300
OUTPUT LOAD CURRENT [mA]
−40
Figure 5. Load Regulation
−10 20
50
80 110
TEMPERATURE [°C]
140
Figure 6. Output Voltage vs. Temperature
65
100
90
GROUND CURRENT [mA]
GROUND CURRENT [mA]
3.0 3.5 4.0 4.5 5.0
INPUT VOLTAGE [V]
80
70
60
60
55
50
45
50
0
−40
25
50
75 100 125 150
OUTPUT LOAD CURRENT [mA]
Figure 7. Ground Current vs. Load Current
−10 20
50
80
110
TEMPERATURE [°C]
140
Figure 8. Ground Current vs. Temperature
http://onsemi.com
4
CAT6218
TYPICAL CHARACTERISTICS (shown for 2.80 V output option)
(VIN = 3.85 V, IOUT = 100 mA, CIN = COUT = 1 mF, CBYP = 10 nF, TA = 25°C unless otherwise specified.)
70
3.0
60
GROUND CURRENT [mA]
OUTPUT VOLTAGE [V]
2.5
2.0
1.5
1.0
0.5
40
30
20
10
0
0.0
0
0.0
100 200 300 400 500 600 700
OUTPUT LOAD CURRENT [mA]
Figure 9. Output Voltage vs. Load Current
1.0
2.0
3.0
4.0
INPUT VOLTAGE [V]
6.0
300
250
DROPOUT VOLTAGE [mV]
300
250
200
150
200
150
100
50
0
100
−40
−10 20
50
80
110
TEMPERATURE [°C]
0
140
Figure 11. Dropout vs. Temperature
(300 mA Load)
50 100 150 200 250
OUTPUT LOAD CURRENT [mA]
300
Figure 12. Dropout vs. Load Current
1.6
80
CBYP = 10 nF
70
60
1.2
PSRR [dB]
ENABLE THRESHOLD [V]
5.0
Figure 10. Ground Current vs. Input Voltage
350
DROPOUT VOLTAGE [mV]
50
0.8
50
40
CBYP = 0
30
20
0.4
10
0
0.0
2.0
2.5
3.0 3.5 4.0 4.5 5.0
INPUT VOLTAGE [V]
0.01
5.5
Figure 13. Enable Threshold vs. Input Voltage
0.1
1
10
FREQUENCY [kHz]
100
Figure 14. PSRR vs. Frequency (10 mA Load)
http://onsemi.com
5
CAT6218
TYPICAL CHARACTERISTICS (shown for 2.80 V output option)
(VIN = 3.85 V, IOUT = 100 mA, CIN = COUT = 1 mF, CBYP = 10 nF, TA = 25°C unless otherwise specified.)
70
70
1kHz
60
10kHz
PSRR [dB]
PSRR [dB]
1kHz
50
50
40
30
10kHz
60
100kHz
40
30
20
20
10
10
100kHz
0
0
0
100
200
300
400
VIN − VOUT [mV]
0
500
Figure 15. PSRR (30 mA Load)
100
200
300
400
VIN − VOUT [mV]
500
Figure 16. PSRR (200 mA Load)
http://onsemi.com
6
CAT6218
TRANSIENT CHARACTERISTICS (shown for 2.80 V output option)
(VIN = 3.85 V, IOUT = 100 mA, CIN = COUT = 1 mF, CBYP = 10 nF, TA = 25°C unless otherwise specified.)
Figure 17. Enable Turn−on (100 mA Load)
Figure 18. Enable Turn−off (100 mA Load)
Figure 19. Enable Turn−on (300 mA Load)
Figure 20. Enable Turn−off (300 mA Load)
Figure 21. Line Transient Response
(3.85 V to 4.85 V)
Figure 22. Load Transient Response
(0.1 mA to 300 mA)
Note: All transient characteristics are generated using the evaluation board CAT621XEVAL1.
http://onsemi.com
7
CAT6218
PACKAGE DIMENSIONS
TSOT−23, 5 LEAD
CASE 419AE−01
ISSUE O
SYMBOL
D
MIN
NOM
A1
0.01
0.05
0.10
A2
0.80
0.87
0.90
b
0.30
c
0.12
A
e
E1
1.00
0.45
0.15
D
2.90 BSC
E
2.80 BSC
E1
1.60 BSC
E
MAX
e
0.20
0.95 TYP
L
0.30
0.40
L1
0.60 REF
L2
0.25 BSC
0º
θ
0.50
8º
TOP VIEW
A2 A
b
q
L
A1
c
L1
SIDE VIEW
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC MO-193.
http://onsemi.com
8
L2
CAT6218
Example of Ordering Information (Note 9)
Prefix
Device #
Suffix
CAT
6218
−180
TD
G
T3
Company ID
(Optional)
Product Number
6218
VOUT Voltage (Note 10)
150: 1.50 V
180: 1.80 V
240: 2.40 V
250: 2.50 V
270: 2.70 V
280: 2.80 V
285: 2.85 V
300: 3.00 V
320: 3.20 V
330: 3.30 V
Package
TD: TSOT−23
Lead Finish
G: NiPdAu
Tape & Reel (Note 11)
T: Tape & Reel
3: 3,000 / Reel
ORDERING INFORMATION
VOUT Voltage
Package
Shipping
CAT6218−150TDGT3
Orderable Part Number
1.50 V
TSOT−23
3,000 / Tape & Reel
CAT6218−180TDGT3
1.80 V
TSOT−23
3,000 / Tape & Reel
CAT6218−240TDGT3
2.40 V
TSOT−23
3,000 / Tape & Reel
CAT6218−250TDGT3
2.50 V
TSOT−23
3,000 / Tape & Reel
CAT6218−270TDGT3
2.70 V
TSOT−23
3,000 / Tape & Reel
CAT6218−280TDGT3
2.80 V
TSOT−23
3,000 / Tape & Reel
CAT6218−285TDGT3 (Note 10)
2.85 V
TSOT−23
3,000 / Tape & Reel
CAT6218−300TDGT3
3.00 V
TSOT−23
3,000 / Tape & Reel
CAT6218−320TDGT3 (Note 10)
3.20 V
TSOT−23
3,000 / Tape & Reel
CAT6218−330TDGT3
3.30 V
TSOT−23
3,000 / Tape & Reel
7. All packages are RoHS−compliant (Lead−free, Halogen−free).
8. The standard finish is NiPdAu.
9. The device used in the above example is a CAT6218−180TDGT3 (VOUT = 1.8 V, in a TSOT−23 package, NiPdAu, Tape & Reel, 3,000/Reel).
10. For other voltage options, please contact your nearest ON Semiconductor Sales office.
11. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
9
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
CAT6218/D